• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.418-426
• /
• 2008

The objectives of this study were to examine the properties of fluoride-releasing resin composite restorative materials. Four commercially available compomer materials (Compoglass F: CF, $Dyract^{(R)}$ AP: DA, $Dyract^{(R)}$ flow: DF, F2000: FT) and one fluoride-releasing composite resin ($Tetric^{(R)}$ Ceram: TC) were selected as experimental materials. Rectangular-shaped tensile test specimens were fabricated in a teflon mold giving 5mm in gauge length and 2mm in thickness. Disk-shaped specimens were fabricated in the split teflon mold with diameter of 15mm and thickness of 1mm. After curing for an hour, specimens were immersed in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 30 days. All specimens were thermocycled for 10,000 cycles with 15 seconds of dwelling time in each $5^{\circ}C$ and $55^{\circ}C$ water baths. Toothbrush abrasion test was conducted under a load of 1.5 N and the abraded surfaces were examined with surface roughness tester (SV-3000, Mitutoyo Co, Japan) and SEM (JSM-5800, JEOL, Japan). Fluoride recharging was done by toothbrushing for 3 min. using a fluoride toothpaste (Perio Alpine Herb, LG Household & Health Care, Korea). The results obtained were summarized as follows; 1. The highest tensile strength value of 32.3 MPa was observed in TC group and the lowest value of 16.8 MPa was observed in CF group. The tensile strength of TC group was significantly higher than those of CF and DF groups (P<0.05). 2. The lowest Ra value of 0.287 was observed in TC group and the highest value of 1.516 was observed in FT group. The Ra value of FT group was significantly higher than other groups (P<0.05). 3. The abraded surfaces revealed the increase of surface roughness due to the protrusion and missing of filler particles. 4. The release of fluoride of compomers after tooth brushing by Perio Alpine Herb was initially large and then followed by small and continuously. But it remains small and constant in fluoride-releasing composite resin of TC. 5. The highest value of fluoride release after toothbrushing by Perio Alpine Herb was $2.064{\mu}g/cm^2$ in CF group and the lowest value was $0.1119{\mu}g/cm^2$ in TC group. The amount of fluoride release of CF group was significantly higher than other groups (P<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.498-503
• /
• 2006

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements (highly-filled glass ionomer cement, compomer, resin-modified glass ionomer cement) and a resin composite(control). The long-term changes in remineralization caused by each material were evaluated by microtomography. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 for 30 days with constant circulation Tomographic images were obtained with a micro CT scanner at 90, 180, and 270 days, and density-measuring software was used to calculate the micro-density of artificial caries lesions in the specimens. The mean density changes were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using one-way ANOVA and the post-HOC Tukey multiple comparison test at p<0.05. While the density of artificial caries lesions increased for all treatments, the increases for the three glass ionomer groups were significantly higher than that for the resin group in each three month period. As time went on, the amount of density increase of the glass ionomer groups decreased, and significant differences were found between the remineralization effects of the glass ionomer groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.71-85
• /
• 1984

The purpose of this study was to get a data which can provide a basis for future direction in nutritional education and to build up right eating habit and to find the way how to improve food life and the nutritional supply by evaluating the current nutritional intake of average middle school girls through the survey study of their daily food intakes and physical status. The survey of nutritional intakes and physical status in two girls middle schools, namely Jang'hung girls middle school at Jang'hung Up and Bo'song girls middle school at Bo'song Up, were carried by teachers majoring in Home Economics and nurse-teachers from 5 July to 7 July 1983. From a total of 1080 subjects of two girls middle schools, 887 subjects were surveyed. The results obtained from survey are summarized as follow: 1) Physical Status Average height, weight and chest girth of subjects in both middle schools were much lower than the Korean average standard (p<0.005${\sim}$p<0.001) and t-score of differences between two middle school girls were not significant. Rohrer index, nutrition rate and physique rate were also lower than Korean averag standard through all the ages in both girls middle schools. Menarche appeared mainly between the age of 13 to 15 (91.55 %), with a mean age of 14 (35. 01 %) and which was experienced by the subjects of 51.52 percentage among total surveyed Iniddlf school girls. 2) Nutritional Intakes The average daily intakes of all nutrient except iron, vitamin A, thiamin, ascorbic acid and niacin was lower than Korean Recommanded Dietary Allowances (RDA) . Especially average intake of calorie and calcium were much lower than Korean RDA(p<0.001) while average intake of thiamine and ascorbic acid were much higher than Korean RDA (p<0.001). T-score of differences of iron, thiamin, riboflavin between two middle school girls were very significant (p<0.001). Generally iron and riboflavin were the highest rate of intakes through three meals and breakfast took charge of considerable amount of all nutrient intake without omitting anything (about 30 % of daily nutrient intake). The nutrients of which ratio of nutrient intake by snack was more than 16.7 % were vitamin A, thiamin, riboflavin, ascorbic acid etc. and snack foods which were intake frequently in both middle school girls commonly were fruits, milk and milk products, bread and biscuits in sequence. 3) Correlations and t-score between physical status, menarche and nutrient intakes. Average intake of calorie at Jang'hung area was positively correlated with height, weight, nutrition rate and physique rate and this correlation was very significant (p<0.005). Average intake of calorie was also correlated with chest girth and Rohrer index (P<0.05). At Bo'song area, averse intake of riboflavin was negatively correlated with all the items of physical status (p<0.05-p<0.005), vitamin A was negatively correlated with chest girth and Rohrer index (p<0.05 respectively) and thiamin was also negatively correlated with chest girth, Rohrer index and nutrition rate (p<0.05 respectively). Especially niacin showed a negative cor-relation with all the items of physical status very significantly (p<0.005).The time of menarche showed a positive correlation with iron in both middle school girls commonly P<0.05 at Jang'hung, p<0.10 at Bo'song).

• Clean Technology
• /
• v.27 no.2
• /
• pp.107-114
• /
• 2021

Material Life Cycle Assessment (MLCA) was performed to analyze the environmental impact characteristics of the Mg₂NiH_x-5 wt% CaO hydrogen storage composites' manufacturing process. The MLCA was carried out by Gabi software. It was based on Eco-Indicator 99' (EI99) and CML 2001 methodology. The Mg₂NiH_x-5 wt% CaO composites were synthesized by Hydrogen Induced Mechanical Alloying (HIMA). The metallurgical, thermochemical characteristics of the composites were analyzed by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), specific surface area analysis (Bruner-Emmett-Teller, BET), and thermogravimetric analysis (TGA). As a result of the CML 2001 methodology, the environmental impact was 78% for Global Warming Potential (GWP) and 22% for Eutrophication Potential (ETP). In addition, as a result of applying the EI 99' methodology, the acidification was the highest at 43%, and the ecotoxicity was 31%. Accordingly, the amount of electricity used in the manufacturing process may have an absolute effect on environmental pollution. Also, it is judged that the leading cause of Mg₂NiH_x-5 wt% CaO is the addition of CaO. Ultimately, it is necessary to research environmental factors by optimizing the process, shortening the manufacturing process time, and exploring eco-friendly alternative materials.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.457-468
• /
• 2020

Problems arising during pile design works for plant construction, civil and architecture work are mostly come from uncertainty of geotechnical characteristics. In particular, obtaining the N-value measured through the Standard Penetration Test (SPT) is the most important data. However, it is difficult to obtain N-value by drilling investigation throughout the all target area. There are many constraints such as licensing, time, cost, equipment access and residential complaints etc. it is impossible to obtain geotechnical characteristics through drilling investigation within a short bidding period in overseas. The geotechnical characteristics at non-drilling investigation points are usually determined by the engineer's empirical judgment, which can leads to errors in pile design and quantity calculation causing construction delay and cost increase. It would be possible to overcome this problem if N-value could be predicted at the non-drilling investigation points using limited minimum drilling investigation data. This study was conducted to predicted the N-value using an Artificial Neural Network (ANN) which one of the Artificial intelligence (AI) method. An Artificial Neural Network treats a limited amount of geotechnical characteristics as a biological logic process, providing more reliable results for input variables. The purpose of this study is to predict N-value at the non-drilling investigation points through patterns which is studied by multi-layer perceptron and error back-propagation algorithms using the minimum geotechnical data. It has been reviewed the reliability of the values that predicted by AI method compared to the measured values, and we were able to confirm the high reliability as a result. To solving geotechnical uncertainty, we will perform sensitivity analysis of input variables to increase learning effect in next steps and it may need some technical update of program. We hope that our study will be helpful to design works in the future.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.357-364
• /
• 2020

The grade and price of Lentinula edodes largely differs in preference depending on the product area and seasonal factors. The product amount of autumn L. edodes was higher than that of spring L. edodes, but high quality, which is divided into "Hwago" is low in preference. Mostly, the autumn L. edodes is obtained as powder; hence, it is necessary to develop a processing method to utilize its flavor and aroma at an affordable price. Additionally, we estimated the content of 𝛽-glucan, ergosterol, vitamin D₂, reducing sugars, and free amino acids and evaluated the anti-inflammatory activity of saccharification powder of log-cultivated L. edodes. In the saccharification powders obtained via 7 min of UV irradiation of log-cultivated L. edodes, 𝛽-glucan and vitamin D₂ contents were found to be the highest, whereas ergosterol content was found to be the lowest. The content of reducing sugars ranged from 62.4 mg/L to 68.2 mg/L. The free amino acids were higher in these saccharification powders than in the control. Subsequently, RAW 264.7 cells were treated with different concentrations (10, 50, 100, 200, 300, and 500 ㎍/mL) of the saccharification powders of log-cultivated L. edodes obtained via different UV irradiation time applications. The cells showed good viability; the anti-inflammatory effect was found to be the highest at 7 min UV irradiation. Therefore, 7 min of UV irradiation was determined to be the optimum condition for manufacturing saccharification powders of log-cultivated L. edodes. Hence, saccharification powders of log-cultivated L. edodes may be used as a raw material for natural sweeteners, food additives, and in the food industry.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.315-324
• /
• 2023

The underlying action of policosanol in lowering cholesterol level has not yet been clearly elucidated. Several recent studies have suggested that sterol regulatory element-binding proteins (SREBP)-1c play a role in the regulation of cholesterol synthesis via the fatty acid synthesis pathway. To date, no study has evaluated the effects of policosanol on SREBP-1c-mediated fatty acid synthesis. Therefore, this study aimed to investigate whether the SREBP-1c-mediated fatty acid biosynthetic pathway is associated with the cholesterol-lowering effects of policosanol. Seven-week-old C57BL/6 male mice were randomly divided into 7 groups (n=7 per group) and treated for 8 weeks as follows: 1) normal diet (normal control), 2) high-fat diet (HFD), 3) HFD+ethanol (Pol-0), 4) HFD+policosanol 1 mg/kg (Pol-1), 5) HFD+policosanol 2 mg/kg (Pol-2), 6) HFD+policosanol 4 mg/kg (Pol-4), and 7) HFD+simvastatin 50 ㎍/kg (positive control). Policosanol and simvastatin were administered at the same time every day while maintaining the HFD. Body weight and food intake were measured weekly for 8 weeks. After 8 weeks, serum cholesterol levels were measured, histological analysis was carried out, and the expressions of SREBP-1c and fatty acid synthase (FAS) in the liver tissues were examined. Policosanol reduced body weight and the amount of food intake in a dose-dependent manner. Serum cholesterol levels were significantly lowered in the Pol-1 and Pol-4 groups. The expression of SREBP-1c and FAS was also significantly decreased in the Pol-4 group. These results suggest that the cholesterol-lowering effects of policosanol can occur due to the inhibition of the expression of SREBP-1c and FAS.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.327-335
• /
• 2019

Purpose: To investigate the radiological efficacy of polymethylmethacrylate (PMMA) augmentation of pedicle screw operation in osteoporotic vertebral compression fractures (OVCF) patients. Materials and Methods: Twenty OVCF patients, who underwent only posterior fusion using pedicle screws with PMMA augmentation, were included in the study. The mean follow-up period was 15.6 months. The demographic data, bone mineral density (BMD), fusion segments, number of pedicle screws, and amount of PMMA were reviewed as medical records. To analyze the radiological outcomes, the radiologic parameters were measured as the time serial follow-up (preoperation, immediately postoperation, postoperation 6 weeks, 3, 6 months, and 1 year follow-up). Results: A total of 20 patients were examined (16 females [80.0%]; mean age, 69.1±8.9 years). The average BMD was -2.5±0.9 g/cm². The average cement volume per vertebral body was 6.3 ml. The mean preoperative Cobb angle of focal kyphosis was 32.7°±7.0° and was improved significantly to 8.7°±6.9° postoperatively (p<0.001), with maintenance of the correction at the serial follow-up, postoperatively. The Cobb angle of instrumented kyphosis, wedge angle, and sagittal index showed similar patterns. In addition, the anterior part of fractured vertebral body height averaged 11.0±5.0 mm and was improved to 18.5±5.7 mm postoperatively (p=0.006), with maintenance of the improvement at the 3-month, 6-month, and 1-year follow-up. Conclusion: The reinforcement of pedicle screws using PMMA augmentation may be a feasible surgical technique for OVCF. Moreover, it appears to be appropriate for improving the focal thoracolumbar/lumbar kyphosis and is maintained well after surgery.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.731-738
• /
• 2011

Cholesterol is the precursor of various steroid hormones, bile acid, and vitamin D with functions related to regulation of membrane permeability and fluidity. However, the presence of excess blood cholesterol may lead to arteriosclerosis and hypertension. Moreover, dietary cholesterol may affect blood cholesterol levels. Generally, cholesterol determination is performed by spectrophotometric or chromatographic methods, but these methods are very time consuming and costly, and require complicated pretreatment. Thus, the development of a rapid and simple analysis method for measuring cholesterol concentration in food is needed. Multi-walled carbon nanotube (MWCNT) was functionalized to MWCNT-$NH_2$ via MWCNT-COOH to have high sensitivity to $H_2O_2$. The fabricated MWCNT-$NH_2$ was attached to a glassy carbon electrode (GCE), after which Prussian blue (PB) was coated onto MWCNT-$NH_2$/GCE. MWCNT-$NH_2$/PB/GCE was used as a working electrode. An Ag/AgCl electrode and Pt wire were used as a reference electrode and counter electrode, respectively. The sensitivity of the modified working electrode was determined based on the amount of current according to the concentration of $H_2O_2$. The response increased with an increase of $H_2O_2$ concentration in the range of 0.5~500 ${\mu}M$ ($r^2$=0.96) with a detection limit of 0.1 ${\mu}M$. Cholesterol oxidase was immobilized to aminopropyl glass beads, CNBr-activated sepharose, Na-alginate, and toyopearl beads. The immobilized enzyme reactors with aminopropyl glass beads and CNBr-activated sepharose showed linearity in the range of 1~100 ${\mu}M$ cholesterol. Na-alginate and toyopearl beads showed linearity in the range of 5~50 and 1~50 ${\mu}M$ cholesterol, respectively. The detection limit of all immobilized enzyme reactors was 1 ${\mu}M$. These enzyme reactors showed high sensitivity; especially, the enzyme reactors with CNBr-activated sepharose and Na-alginate indicated high coupling efficiency and sensitivity. Therefore, both of the enzyme reactors are more suitable for a cholesterol biosensor system.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2017

Purpose: This study aimed to investigate the perception and emotional experiences in rare and intractable diseases for caregivers of pediatric patients with mitochondrial diseases in order to provide therapeutic interventions for patients, caregivers, and families. Methods: A total of 83 caregivers of pediatric patients with mitochondrial diseases were recruited from the pediatric mitochondrial disease clinics of the Gangnam Severance Hospital in South Korea. Participants completed the survey about their perception of mitochondrial disease and emotional experiences after the diagnosis, and these clinical data were analyzed accordingly. Results: Surveys from a total of 83 caregivers of patients were analyzed, and the patients' age ranged from 6 to 12 years (33%), followed by ages 1 to 6 years (30%). Children with mitochondrial diseases were between 0 and 0.5 years of age at the time of first symptom onset (43%), and the duration of illness lasted more than 10 years in most cases (42%). Prior to diagnosis of mitochondrial diseases, the amount of awareness the caregivers had was 'Not at all' for both rare and intractable diseases and mitochondrial diseases in 44 cases and 68 cases, respectively. For the caregivers' emotional experiences, the most common initial responses were 'Discouraged/despair', 'Helpless/lethargic', and 'Disconcerted'. 'Anxious', 'Committed to treatment', and 'Responsibility as family members' were the most common emotional responses from the caregivers, followed by 'Disconcerted' and 'Helpless/lethargic'. Conclusion: It is important to consider the level of perception and emotional experiences of caregivers and patients with rare and intractable mitochondrial diseases for planning treatment programs.