• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.200-204
• /
• 2008

Mechano Chemical Process (MCP) skips the calcinations steps at an intermediate temperature that is always required in the conventional solid-state reaction because forming phase from raw powder is activated by mechanical energy. In this study, we prepared (Pb, La)$TiO_3$ nanopowder with perovskite structure by only high energy MCP. Especially, the PLT nanopowder was synthesized without any thermal treatment using oxides, not salts as raw powder. This process is also very simple due to dry milling method, unnecessary to dry of powder. The oxide powder was milled up to 12 hr at intervals of an hour using MCP and the pure PLT phase of perovskite structure was formed after milling time of 3 hr. And the average particle size was 20 nm with narrow distribution after milling time of 3 hr from raw powder of several $\mu m$ with inhomogeneous distribution.

• Journal of Animal Science and Technology
• /
• v.63 no.3
• /
• pp.531-544
• /
• 2021

Heat stress (HS) damages health and decreases performance variables in pigs, and if severe enough, causes mortality. However, metabolic changes under HS and recovery following HS are poorly understood. Therefore, this study was aimed to expose the essential mechanisms by which growing pigs respond to HS and the temporal pattern of plasma concentrations (PC) of amino acids (AAs) and metabolites. Crossbred male growing pigs were penned separately and allowed to adapt to thermal-neutral (TN) conditions (20℃ and 80% relative humidity; TN[-1D]). On the first day, all pigs were exposed to HS for 24 h (36℃ and 60% relative humidity), then to TN conditions for 5 days (TN[2D] to TN[5D]). All pigs had ad libitum access to water and 3 kg feed twice daily. Rectal temperature (RT) and feed intake (FI) were determined daily. HS pigs had higher RT (40.72℃) and lower (50%) FI than TN(-1D) pigs (p < 0.01). The PC of indispensable (threonine, valine, and methionine) and dispensable (cysteine and tyrosine) AAs were higher (p < 0.05) in HS than TN(-1D) pigs and remained increased during recovery time. Nonprotein α-aminobutyric acid and β-alanine concentrations were higher (p < 0.05) in HS than TN(-1D) pigs. The metabolite concentration of creatinine was higher (p < 0.01) under HS treatment than other treatments, but that of alanine and leucine remained increased (p < 0.05) through 5 d of recovery. In summary, some major differences were found in plasma AA profiles and metabolites between HS- and TN-condition pigs. This indicates that the HS pigs were forced to alter their metabolism, and these results provide information about mechanisms of acute HS responses relative to the recovery time.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.4
• /
• pp.167-177
• /
• 2016

Smectitic clays, occurring in Kırka and Bigadiç boron evaporite deposits formed in Miocene playa lake environment in Turkey, contain $LiO_2$ 0.02-0.21% and 0.16-0.30%, respectively, and boron tailings are also reported to contain $LiO_2$ 0.04-0.26%. Lithium in smectitic clays was identified to be retained in hectorite. The XRD results revealed that hectorite was contained in 25.7% and 79.7% of Kırka and Bigadiç deposit samples respectively. In this study, we selected a clay sample from each deposit with lithium content of ~0.18% and estimated extractable lithium by acid treatment and roasting method commercially applicable to lithium resources, such as lepidolite and hectorite. When 1 g of crushed clay (particle size less than $74{\mu}m$) was reacted with 200 mL of 0.25 M HCl solution, the amount of lithium dissolved increased with the increase of reaction time up to 10 hours for both samples. Reaction time longer than 10 hours did not significantly increased the amount of lithium dissolved. After 10 hours of reaction, 89% of lithium in the clay sample from the Kırka deposit was dissolved, while 71% of lithium was dissolved from the Bigadiç deposit tailing sample. 87% of lithium in the clay sample from the Kırka deposit was extracted and 82% of lithium was extracted from the Bigadiç deposit tailing sample by the roasting extraction method, where clays were leached after a thermal treatment at $1,100^{\circ}C$ for 2 hours with $CaCO_3$ and $CaSO_4$.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.1-6
• /
• 1979

1. The study was conducted on the optimum condition of the treated substrate with dilute sulphuric acid solution and cellulase for saccharification. The wood (saw dust) of Alnus hirsuta Rupr. (10~15 years) was treated with 0.3%, 0.6%, 0.9%, 1.2%, 1.5%, $H_2SO_4$ solution at $1.5kg/cm^2$ for 15min., 30min., 45min., and 60min., followed by thermal treatment at $190^{\circ}C$ for 30min., and screening with 60 mesh sieve, after which to 0.5 grams of each sample was added 0.5ml cellulase solution, and 50ml 0.1M acetic acid buffer solution (pH 5.0), after incubating at $40^{\circ}C$ for 96hr. 2. The crude cellulase of Trichoderma viride Perx. ex. Fr. SANK 16374 was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfite. 3. Reducing sugar was determined by the 3.5-dinitrosalicylic acid (DNS) method. 4. The reducing sugar was increased with increase of the sulphuric acid concentration and saw dust was treated with 1.5% $H_2SO_4$ solution at $1.5kg/cm^2$ for 45min. showed the best saccharification (16.0%). The reducing sugar formation did not show statistically significant in 5% levels by thermal treatment time 45min. and 60min. 5. The substrate for cellulase which was treated with 0.9% $H_2SO_4$ solution at $1.5kg/cm^2$ for 60min. showed the best reducing sugar formation (23.6%). And did not show significant difference in 5% levels at 0.9%, 1.2%, and 1.5% $H_2SO_4$ solution.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.1
• /
• pp.37-46
• /
• 2006

Purpose: To evaluate the end results between the surgical treatment with neo-adjuvant chemotherapy in Korea and non-invasive high intensity focused ultrasound (HIFU) technique in China for osteogenic sarcomas. Materials and Methods: The surgical treatment with neoadjuvant chemotherapy for total 67 cases (4 IIA, 58 IIB, and 5 III) in Korea since 1993 and the HIFU therapy for total 71 cases (57 II and 14 III) in China since 1997 was performed. In Korea, neo-adjuvant chemotherapy in 66 cases out of total 67 patients, but the adjuvant chemotherapy in only one case was done. On the contrary, in China, full chemotherapy for more than 9 times for 37 patients with stage II out of total 71 cases, but for less than 8 times of partial chemotherapy for 23 patients (stage II) and 14 patients (stage III) was done. The surgical treatment in total 67 Korean patients was done with wide resection and reconstruction for 56 patients, but wide resection without reconstruction for 5 patients and amputation for 6 patients. In china, total 71 patients was treated with average 1.5 times (1~4 times) of HIFU, and if there are some evidences of residual tumor after HIFU with following MRI, the second HIFU therapy was given 2~4 weeks later. After then, the bony defect was in no touch, keep bracing for long time expecting regeneration. All of them were followed for average 46 Mo (12~150 Mo) in Korea, but followed for average 22 Mo (9 years~8 months) in China. Results: The 5 year survival rate (stage II), was average 92.7% (IIA 100%, IIB 85.5%) in Korea series, and average 78.7% (full chemotherapy 91.8%, part chemotherapy 56.6%) in China series. The 3 year survival rate (stage III) was 20% in Korea and 7.1% in China. So, the final overall survival rate was 65.2% in Korea and 51.8% in China. The overall functional outcome score by ISOLS was 24.3 (81%) in Korea and 19.8 (73%) in China. There are 25.4% (17/67 cases) of complications in Korea and 31% (27 complications in 22 patients out of total 71 cases) in China after each treatment. Conclusions: The end results of Korea series which was treated with neoadjuvant chemo- and surgical methods are better than that of non-invasive thermal ablation in china. But we also believe the HIFU, as one of, was also effective to decrease the local recurrence and symptomatic releaf for stage II or even in III of osteogenic sarcomas.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.733-742
• /
• 2000

Fundamental materialistic characterization and adsorption/neutralization behavior of waste egg shell for heavy metal ion have been studied for its application to wastewater treatment. To investigate the structural change and thermal decomposition characteristics of egg shell. X-ray diffraction and FT-IR analysis were conducted for egg shell treated at $105^{\circ}C$ and $700^{\circ}C$, respectively. For the result of FT-IR analysis, the sample treated at $700^{\circ}C$ showed a reduced C-O absorption band compared with that of egg shell treated at $105^{\circ}C$, which may be due to the $CO_2$ release. Unlike to the result of FT-IR analysis, the XRD patterns of egg shell were almost similar for the cases of $105^{\circ}C$ and $700^{\circ}C$ treatment. however, characteristic diffraction pattern of CaO was observed for $850^{\circ}C$ treatment, at which $CaCO_3$ is known to be completely converted to CaO. TGA/DTA analysis showed a slow decline in weight loss up to $600^{\circ}C$ and, for $600{\sim}800^{\circ}C$ range, the weight loss became drastic by reason of $CO_2$ discharge, which was accompanied by an appearance of major endothermic peak. The ratio of practical breakthrough time to ideal one, total transfer unit, and mass transfer coefficient were observed to be increased as the adsorption was progressed in a multiple-column fixed-bed reactor using egg shell as an adsorbent, which signified the distribution effect of mass transfer for continuous adsorption reaction. The neutralization effect of egg shell for several types of acidic wastewater made of different mineral acids was not much different from each other except for the case of $H_2SO_4$, for which the neutralization reaction was thought to be retarded by the formation of gypsum.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.39-48
• /
• 2010

The purpose of this study was to analyze air temperature decreasing effects by shading and ventilation at micro-scale experiment plots, especially focused on the Wet Bulb Globe Temperature (WBGT) in outdoor spaces. To monitor the time-serial changes of Dry-bulb Temperature (DT), Globe Temperature (GT) and Relative Humidity (RH) in the wind blocking and shading conditions, Two hexahedral steel frames were established on the open grass field, the dimension of each frame was 1.5m(W)${\times}$1.5m(L)${\times}$1.5m(H). Four vertical side of one frame was covered by transparent polyethylene film to prevent wind passing through (Wind break plot; WP). The top side of the other frame was covered with shading curtain which intercept 95% of solar light and energy (Shading plot; SP). And, Another vertical steel frame without any treatment preventing ventilation and sunlight was set up, which represents natural conditions (Control plot; CP). The major findings were as follows; 1. The average globe temperature (GT) was highest at WP showing $50.94^{\circ}C$ and lowest at SP showing $34.58^{\circ}C$. The GT of natural condition (SP) was $42.31^{\circ}C$ locating the midst between WP and SP. The difference of GT of each plot was about $8-16^{\circ}C$, which means the ventilation and shading has significant effect on decreasing the temperature. 2. WP showed the highest average dry-bulb temperature (DT) of $38.41^{\circ}C$ which apparently differ from SP and CP showing $31.94^{\circ}C$ and $33.15^{\circ}C$ respectively. The DT of SP and CP were nearly the same. 3. The average relative humidity (RH) was lowest at WP showing 15.21%, but SP and CP had similar RH 28.79%, 28.02% respectively. 4. The average of calculated WBGT were the highest at the WP ($27.61^{\circ}C$) and the lowest at the SP ($23.64^{\circ}C$). The CP ($25.49^{\circ}C$) was in the middle of the others. As summery, compared with natural condition (CP), the wind blocking increased about $2.11^{\circ}C$ WBGT, but the shading decreased about $1.84^{\circ}C$ WBGT. So It can be apparently said that the open space with much shading trees, sheltering furnitures and well-delivered wind corridor can reduce useless and even harmful energy for human outdoor activity considerably in outdoor spaces.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.459-463
• /
• 2012

In the present study, experiments have been performed to investigate the effects of the type of adsorbent, pH, and ionic strength on the adsorption of nutrients (nitrate and phosphate in artificial solution) onto the dredged sediment from a coastal fishery. In addition, this study aims to evaluate the possibility of removing the nutrients from the water using the dredged sediment. In the adsorption experiments of the nutrients, the reactions were completed within 10 minutes using ${NO_3}^-$-N($100{\mu}M$, 10mM) and ${PO_4}^{3-}$-P($100{\mu}M$, 10mM). In the steady state, 61% and 77% of the initial amounts were removed respectively for $100{\mu}M$ ${NO_3}^-$-N and $100{\mu}M$ ${PO_4}^{3-}$-P. The thermal treatment of the dredged sediment at $900^{\circ}C$ was not helpful to increase the removal efficiencies of the nutrients. Additives such as CaO and MgO dropped the removal efficiency of ${NO_3}^-$ to 0%, but increased that of ${PO_4}^{3-}$ up to 98%. Adsorption isotherms of ${NO_3}^-$ and ${PO_4}^{3-}$ could be explained by the Freundlich equation ($R^2$>0.99). The adsorption reaction was little influenced by the pH and ionic strength. Based on the results showing short reaction time and considerably high removal efficiencies of the nutrients, it is proposed to apply the dredged sediment from a coastal fishery to removing nutrients such as nitrate and phosphate in the water.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.2
• /
• pp.125-136
• /
• 1990

To develope a rapid processing method for fish sauce, processing conditions of fish sauce from sardine waste was investigated. The chopped waste was homogenized and hydrolyzed by commercial proteolytic enzymes such as Complex enzyme-2000($2.18\cdot10^4$ U/g solid) and Alcalase($1.94\cdot10^4$ U/g solid) in a cylindrical vessel with 4 baffles and 6-bladed turbine impeller. Optimal temperature for the case of hydrolysis with Complex enzyme-2000 was 50 and that with Alcalase was $55^{\circ}C$. In both cases, the reasonable pH, amount of water for homo-genization, enzyme concentration and hydrolyzing time were 8.0, $40\%$ (W/W), $3\%$ and 100 min, respectively. Heating of the filtrated hydrolysate for 2 hours at $90^{\circ}C$ with $6\%$ of invert sugar was suitable for pasteurization of the hydrolysate and inactivation of enzymes. Flavor, taste and color of the hydrolysate was improved during the thermal treatment in which the browning reaction products might participate and result in antioxidative and bactericidal effects. Combined use of $0.005\%$ of Caryophylli flos with invert sugar was also effective for the improvement of taste. Yield of the fish sauce based on the total nitrogen in the raw sardine waste was $91.2\~92.3\%$ and $87.2\~87.8\%$ of the total nitrogen in the fish sauce was in the form of amino nitrogen. The pH, salinity and histamine content of the fish sauce prepared with $15\%$ of table salt were $6.1\~6.2$, $14.2\~14.4\%$ and less than $10mg\%$, respectively. The fish sauce was stable during the storage of 60 days at $26\pm3^{\circ}C$ on bacterial growth and its quality was also maintained.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.630-635
• /
• 2022

Copper(II) oxide (CuO), electroless plated on a nitrogen-containing carbon sponge prepared by a melamine sponge thermal treatment, was developed as a nitric oxide (NO) gas sensor that operates without a wafer. The CuO content on the surface of the carbon sponge increased as the plating time increased, but the content of nitrogen known to induce NO gas adsorption decreased. The untreated carbon sponge showed a maximum resistance change (5.0%) at 18 min. On the other hand, the CuO plated sample (CuO30s-CS) showed a maximum resistance change of 18.3% in 8 min. It is considered that the improvement of the NO gas sensing capability was caused by the increase in hole carriers of the carbon sponge and improved movement of electrons due to CuO. However, the NO gas detection resistance of the CuO electroless plated carbon sponge for 60 s decreased to 1.9%. It is considered that the surface of the carbon sponge was completely plated with CuO, resulting in a decrease in the NO gas adsorption capacity and resistance change. Thus, CuO-plated carbon sponge can be used as an effective NO gas sensor because it has fast and excellent resistance change properties, but CuO should not be completely plated on the surface of the carbon sponge.