• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.102-110
• /
• 2000

In this paper, Wiener-Hopf design of the two-degree-of-freedom(2DOF) controller configuration is treated for the standard plant model. It is shown that the 2DOF structure makes it possible to treat the design of feedback properties and reference tracking problem separately. Wiener-Hopf factorization technique is used to obtain the optimal controller which minimizes a given quadratic cost index. The class of all stabilizing controllers that yield finite cost index is also characterized. An illustrative example is given for the step reference tracking problem which can not be treated by the conventional H2 controller formula.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.448-451
• /
• 2008

This study is under doing to suggest application manual using assembling reference plane design & standard finish material basis upon material classification code as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plant. We can say the goal of building standardization intend not only the improvement of construction productibility but also guarantee of subsequent performance through automatization basis upon informationalization of building design. For a etabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 환경생물
• /
• 제38권2호
• /
• pp.248-253
• /
• 2020

DNA 함량 조사는 진화의 유전적 기작을 예측하여 종분화를 파악하게 한다. 본 연구의 목적은 참전복(Haliotis discus hannai)의 DNA 함량을 측정하고 유세포분석기(flowcytometry)로 고정(fixation) 없이 DNA 함량 측정에 최적인 조직들을 파악하는 것이다. DNA 함량 (pg nucleus^-1)에 있어, 원생생물에 오염된 아가미조직(2.5±0.08)은 3.2±0.02 pg nucleus^-1의 DNA 함량을 보인 근육조직과 외투막조직에 비하여 유의하게 낮았고(p<0.05) standard reference보다도 낮은 반면, 근육조직과 외투막조직은 standard reference보다 높았다. 본 연구 결과들을 고려 시, 참전복에서 고정 없이 유동세포분석에 적절한 조직은 근육과 외투막이며 본 연구에 적용된 고정 과정이 없는 유세포분석법은 참전복 DNA 함량 분석 시 정확하고, 신속한 방법임이 판명되었다.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.824-835
• /
• 2016

2015년 기준 자동차 등록대수는 약 2,100만대를 넘어 1가구당 1.07대를 보유하고 있는 실정이나[1], 국내 자동차용 표준연료에 대한 기준은 부재한 상황이다. 자동차용 표준연료(reference fuel)는 차량의 연비와 배출가스를 인증하거나 새로운 자동차를 개발할 때 차량의 성능 등을 평가하기 위해 사용하는 연료를 의미한다. 현재 국내에는 차량의 배출가스, 성능, 연비시험 등을 위해 유통연료를 사용하고 있으며, 유통연료는 석유 및 석유대체연료사업법과 대기환경보전법 상의 품질기준을 만족하지만 각 제조사의 원료와 공정 등에 따라 연료의 물성차이가 있어 차량 시험 시 편차가 발생할 수 있다. 본 연구에서는 국내 유통되는 휘발유 품질모니터링 분석결과를 바탕으로 표준연료 기준(안)을 설정하고, GDI와 MPI 연료 분사 방식의 차량에 적용하여 비교 평가한 결과, 실제 유통연료를 사용했을 때 최대 3.8%까지 발생하는 연비차이가 1.1%까지 감소함을 확인할 수 있었다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1148-1154
• /
• 2009

This study focus on the suggestion of application manual using assembling reference plane design & standard finish material basis upon material classification code. We see it will function as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plan. For a estabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 한국도서관정보학회지
• /
• 제39권3호
• /
• pp.299-320
• /
• 2008

이 연구는 MRF(Master Reference File)를 바탕으로 2005년에 영국의 BSI(British Standards Institution) 에서 인쇄 형태로 출판한 UDC(Universal Decimal Classification)의 표준판(Standard edition)을 대상으로 그 성립배경과 구조적 특성을 분석하고, 한국어 간략판과 비교하였다. UDC는 다른 십진식분류표에 대비하여 독특한 구조적 특성이 있으며, 한국어 간략판과 비교하여 볼 때 국제적 보편성을 더욱 강화하였고, 보조표를 통한 조합의 방식이 더욱 확대되었다. 이 연구를 바탕으로 앞으로의 KDC(Korean Decimal Classification)의 개정에 있어서 참고가 될 만한 KDC MRF 데이터베이스 개발과 보조표의 개선과 새로운 신설을 제언하였다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1651-1655
• /
• 2011

The reference impedances which is about 95% supply impedance value of residential consumers' supply impedances was published by IEC in 1980. The reference impedances are the standard values for use in determining the voltage disturbance characteristics of electrical equipment like the flicker. In IEC 60725, the reference impedances for premises having service current capacities less than 100A per phase and for service current capacities more than 100A per phase are recommended. And these reference impedances are targeted for the countries using 50Hz power frequency. Because of the frequency difference, the reactance values of the reference impedances will be increased in 60Hz power system like Korea, And also the reference impedances are different significantly each other according to declared voltage variation, power consumption and service wire length etc. Therefore It is needed to calculate the reference impedances suitable for domestic low-voltage power system. In this paper, the reference impedances for service current capacities less than 100A in 220/380V, 60Hz single-phase two wire and three-phase four wire low-voltage system are calculated, And the equations for service current capacities more than 100A to calculate the modulus value of maximum supply impedances are suggested base on IEC 60725 and the reference impedances for those are calculated on service current of 100A per phase.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권1호
• /
• pp.68-74
• /
• 2008

In this paper, a novel neural fuzzy control method is proposed to control nonlinear systems. A standard PD-like fuzzy controller is designed and used as a main controller for the system. Then a neural network controller is added to the reference trajectories to form a neural-fuzzy control structure and used to compensate for nonlinear effects. Two neural-fuzzy control schemes based on two well-known neural network control schemes, the feedback error learning scheme and the reference compensation technique scheme as well as the standard PD-like fuzzy control are studied. Those schemes are tested to control the angle and the position of the inverted pendulum and their performances are compared.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.61-65
• /
• 2014

The purpose of this study is to evaluate the applicability of the element stress to establish S-N design curve for the welded lap joint with thin plates below 2mm thickness. In order to do it, the extensive fatigue tests of the welded lap joints with INVAR alloy were performed. With the results, the deign S-N curves for the lap-weld were established by using the reference stresses such as the nominal stress range at the weld throat area, hot spot stress range and element stress range, and compared with regard to the standard deviation. The standard deviation of S-N curves with element stress range was less than that of S-N curves with other reference stresses. In addition, FEA results show the amount of the element stress is less sensitive to mesh size. Based on the results, it can be concluded that the element stress is to be used as the reference stress for the design S-N curves of the welded lap joint.

• 센서학회지
• /
• 제14권4호
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.