• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.989-998
• /
• 2016

In this study, we analyzed the content and compensation factors of 337 cases of national environmental disputes from five recent years (2000~2014). Causes of damage were noise-vibration in 234 cases (69%), sunlight in 48 cases (14%), air pollution in 19 cases (6%), water pollution in 15 cases (4%), odor in 13 cases (4%), and others factors in 8 cases (3%). Sources of damage were construction in 224 cases (66%), structures in 36 cases (11%), vehicle on road in 31 cases (9%), industry in 18 cases (5%), environmental facility in 11 cases (3%), livestock facility in 6 cases (2%), and other sources in 11 cases (3%). From the results of logistic regression analysis, important factors associated with compensation were found to be damage amount, damage distance, zoning districts, source, and administrative disposition.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.499-508
• /
• 1998

The Imgok Creek is located in the Gangreung coal field, which has been known that sulfides are more abundant than other coal fields in Korea, and it has been severly contaminated by acid mine drainage (AMD) discharging from the abandoned coal mines, such as the Youngdong, the Dongduk and the Waryong coal mines. The purposes of this study are to synthetically assess the contamination of natural water, stream sediment and cultivated soils, and to provide the basic data for AMD treatment. Geochemical samples were collected in December, 1996 (dry season) and April, 1997 (after three day's rainfall). TDS of the Youngdong mine water was remarkably higher than those of other mine waters. In the Imgok Creek, concentrations of most elements, except Fe decreased with distance by dilution caused by the inflow of uncontaminated tributaries. From the results of NAMDI and $I_{geo}$ calculation, the Youngdong coal mine was the main contamination source of the study area. Groundwater pollution was not yet confirmed in this study and the paddy and farm land soils were also not yet contaminated by mining activity based on the pollution index ranging from 0.27 to 0.47.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.257-264
• /
• 2012

The concept of a non-contact type of UV disinfection system was introduced in this study. UV lamps and their quartz sleeves hang over the water surface and there is no interface between the sleeve and water. Obviously, there is no fouling. Based on optical laws and other UV distribution models, a detail mathematical model for a non-contact type UV disinfection system was developed in this study. Pathway length of UV light in a non-contact type photoreactor is longer than that in a submerged type photoreactor because the light is more refractive while passing through 3 interfaces of medium. But the pathway length passing through the water media is not significantly longer than that in a submerged type photoreactor so, the absorption of UV light by water is not significantly different from the other system. Due to the reflection effect, UV intensity is rapidly decreased as the horizontal distance from the light source is increased. The reflective attenuation in a non-contact type photoreactor is higher than that in a submerged type photoreactor. These mean that the short photoreactor is advantageous than the narrow-long photoreactor for the non-contact type photoreactor in an optical point of view.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.783-793
• /
• 2010

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or propagate useful traffic information to other vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collisions at the link layer due to an excessive number of broadcast packets. We present a fuzzy alert message dissemination algorithm to improve performance for road safety alert application in Vehicular Ad-hoc Network (VANET). In the proposed algorithm, when a vehicle receives an alert message for the first time, the vehicle rebroadcasts the alert message according to the fuzzy control rules for rebroadcast degree, where the rebroadcast degree depends on the current traffic density of the road and the distance between source vehicle and destination vehicle. Also, the proposed algorithm is the hybrid algorithm that uses broadcast protocol together with token protocol according to traffic density. The performance of the proposed algorithm is evaluated through simulation and compared with that of other alert message dissemination algorithms.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.1
• /
• pp.18-23
• /
• 1966

An experimental study of a steel plate thickness gauge by means of the measurements of backscatered gamma-rays has been carried out. The difference between this and other methods is that this method does not include any shilding matterials in the detecting probe, because the primary radiations and the backscattered radiations are detected simultaneously by an NaI (TI) scintillating crystal, and the activity of the Co-60 source used is low enough. In this thickness gauge, the thickness of the steel plates can be read directly on the counting ratemeter scale. The optimum conditions in the source-to-detector distance, window width of the analyzer, energy and strength of the gamma-ray source were found experimentally. The results have shown that the accuracy of the gauge was about $\pm$3% in the range of 3 to 8mm thickness. This gauge can be used to detect the pits or corrosions on the inner walls of the steel pipes.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.531-539
• /
• 2023

Self-absorption is the most important factor affecting the accuracy of gamma spectroscopy measurements in environmental samples. In particular, it is affected by other factors such as the chemical composition of the sample, geometric shape, thickness, density, atomic number, distance between the sample and detector, energy of the emitted gamma photon, and humidity coefficient or percentage in the sample. To test the calibration method, a 450 ml CRM standard source (9 nuclide) Marinelli beaker was used. Five soil samples among environmental samples were measured by density by applying the corrected values. Therefore, it can be seen that the self-absorption value is more effective for somewhat large and low photon energy. In the case of environmental samples, it was confirmed that the overall energy peak efficiency through self-absorption of the source greatly depends on the density of the sample.

• Progress in Medical Physics
• /
• v.22 no.4
• /
• pp.190-197
• /
• 2011

Currently, the dose distribution calculation used by commercial treatment planning systems (TPSs) for high-dose rate (HDR) brachytherapy is derived from point and line source approximation method recommended by AAPM Task Group 43 (TG-43). However, the study of Monte Carlo (MC) simulation is required in order to assess the accuracy of dose calculation around three-dimensional Ir-192 source. In this study, geometry factor was calculated using segmented sources integration method by dividing microSelectron HDR Ir-192 source into smaller parts. The Monte Carlo code (MCNPX 2.5.0) was used to calculate the dose rate $\dot{D}(r,\theta)$ at a point ($r,\theta$) away from a HDR Ir-192 source in spherical water phantom with 30 cm diameter. Finally, anisotropy function and radial dose function were calculated from obtained results. The obtained geometry factor was compared with that calculated from line source approximation. Similarly, obtained anisotropy function and radial dose function were compared with those derived from MCPT results by Williamson. The geometry factor calculated from segmented sources integration method and line source approximation was within 0.2% for $r{\geq}0.5$ cm and 1.33% for r=0.1 cm, respectively. The relative-root mean square error (R-RMSE) of anisotropy function obtained by this study and Williamson was 2.33% for r=0.25 cm and within 1% for r>0.5 cm, respectively. The R-RMSE of radial dose function was 0.46% at radial distance from 0.1 to 14.0 cm. The geometry factor acquired from segmented sources integration method and line source approximation was in good agreement for $r{\geq}0.1$ cm. However, application of segmented sources integration method seems to be valid, since this method using three-dimensional Ir-192 source provides more realistic geometry factor. The anisotropy function and radial dose function estimated from MCNPX in this study and MCPT by Williamson are in good agreement within uncertainty of Monte Carlo codes except at radial distance of r=0.25 cm. It is expected that Monte Carlo code used in this study could be applied to other sources utilized for brachytherapy.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.85-106
• /
• 2019

Offshore wind power is a representative renewable energy source and a rapidly growing industry. In Gyeongsangnam-do, offshore wind farms of 461.9MW are being pushed for in the Yokji island and are expected to expand further to over 1GW in the future. Accordingly, ports supporting the storage, assembly, transportation, and installation of offshore wind power equipment are expected to play an important role in the smooth progress of the offshore wind farm development project. Based on previous research and cases in major countries,this study prepared criteria for assessment of ports supporting offshore wind farmsand evaluated ports in Gyeongsangnam-do, which are linked to Yokji island offshore wind farms. The assessment criteria have been subdivided into distance from the offshore wind farm, port entry and exit restrictions, navigational areas, fishery rights factors, additional costs, berth length, depth of berth, size of the port yard, port berth bearing pressure, interference with other cargo, a civil appeal, and relevant industrial aggregation. The ports of Tongyeong, Samcheonpo, Kohyun, Masan, and Jinhae in Gyeongsangnam-do were selected and evaluated. As a result, the port of Tongyoung was superior in terms of distance from the Yokji island offshore wind farm. The ports of Samcheonpo, Masan, and Jinhae were evaluated as excellent in other criteria such as berth length, depth of berth, and so on. This study is expected to be used as a source of basic data for offshore wind power companies and policymakers to select and evaluate the supporting ports of offshore wind farms.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.246-255
• /
• 2007

The floating image system (FIS) is a device to display input source in the space between fast surface of the display and an observer and it provides pseudo 3D depth to an observer when input source as real object or 2D image was displayed through the optical lens system in the FIS. The Advanced floating image system (AFIS) was designed to give more effective 3D depth than existing FIS by adding front and rear depth cues to the displayed stereogram, which it was used as input source. The magnitude of disparity and size of stereogram were strongly related each other and they have been optimized for presenting 3D depths in a non-optical lens systems. Thus, if they were used in optical lens system, they will have reduced or magnified parameters, leading to problem such as providing incorrect 3D depth cues to an observer. Although the size of stereogram and disparity were demagnified by total magnifying power of optical system, the viewing distance (VD) from the display to an observer and base distance (BD) for the gap between the eyes were fixed. For this reason, the quantity of disparity in displayed stereogram through the existing FIS has not kept the magnifying power to the total optical system. Therefore, we proposed the methods to provide correct 3D depth to an observer by compensating quantity of disparity in stereogram which was satisfied to keep total magnifying power of optical lenses system by AFIS. Consequently, the AFIS provides a good floating depth (pseudo 3D) with correct front and rear 3D depth cues to an observer.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.5-13
• /
• 1969

Present system of seed potato production in Korea has several weak points and consequently has difficulties in covering annual shortage of 60,000 tons of seed potatoes. The author has an opinion that this so called 'High land system' of seed potato production adopted by the Government should be replaced by the 'Coastal area system' which is proposed by the author and has many advantages over present 'High land system'(2). In coastal areas where enormous acreage of rice paddies are spread, mostly around the villages. the primary host plants of the vectors are found. Therefore, the only source of aphid vectors are limited to the villages. The farmer's houses scattered more sparsely also have minor importance. In the previous paper(2), the author reported that the aphid vector populations were lower in the coastalareas than at Taegwanryong where the Alpine Experiment Station for the production. of seed potatoes is located. However, the number to vectors at Okku showed rather high density, where the trap was placed at the distance of 200 m from a village where peach and Hibiscus trees, the primary hosts of Myzus pesrsicae and Aphis gossypii were grown. To clarify the flight distance from the source of the aphid vectors, a trial was carried out in the Kwanghwal area, Kimje-gun, Cholla-pukto. on the western coast. 13 traps were placed at four directions and the distances between the traps were 250 m. (Fig. I) The traps 'Were operated from June 21 to October 31. The results are shown in Table 1. A total of some 70 species of aphids were found, including 5 speceis of potato virus vectors. The vectors are as follows: I. Myzus persicae (Sulzer) 2. Aphis gossypii Glover 3. Aulacorthum solani (Kaltenbach) 4. Lipaphis erysimi (Kaltenbach) 5. Macrosiphoniella sanborni (Gillette) Out of a total of 12,797 aphids, 5,187$(48\%)$ vectors were found. The trap catches at the 13 locations are shown in Fig. 2 and the numbers of the vectors at each location for each vector, except Macro-siphoniella sanborni. of which only a single individual was caught, are shown in Fig. 3-6. Number of vectors at C (3,279) (Centre of the village) is considerably higher than that at Suwon (763); however, EI. SI. WI and NI. where the distanecs from Care 250 m, showed lower numbers of vectors than that at Taegwanryong (347). The number of vectors at NI was rather than at the other 3 locations at the distance of 250m from the village. This was because C was in the southern part of the village. Consequently NI was much closer to the village than the other 3 locations of the same distance from C. Numbers of catches of the most important vector. Myzus persicae, are shown in Fig.3. The distribution pattern is typical except $S-2\;and\;W_3$, where several farmer's houses were found. If only the rice paddies were found in these locations. the numbers of the vectors would be small as the distances increase. Numbers of catches of the other 3 vectors are shown in Fig. 4-6. From these results. the author has drawn the following conclusions: 1. The aphid vector sources at the rice paddy belt in the western coast are the villages. 2. The vector densities at the locations where the distances are 250 m from the centre of the village are lower than that at Taegwanryong. 3. The vector densities become gradually lower as the distances from the centre of village increase. However. depending on the host plant situation at each location, the vector densities are variable. These minor sources of aphid vectors may be eliminated so that seed potatoes can be grown. 4. Thus. under the direction of specialists, fields suitable for seed potato production can be found in the coastal areas.