• 제목/요약/키워드: the source distance of the other

검색결과 188건 처리시간 0.023초

Radiation Exposure of the Hand and Chest during C-arm Fluoroscopy-Guided Procedures

  • Jung, Cheol Hee;Ryu, Jae Sung;Baek, Seung Woo;Oh, Ji Hye;Woo, Nam Sik;Kim, Hae Kyoung;Kim, Jae Hun
    • The Korean Journal of Pain
    • /
    • 제26권1호
    • /
    • pp.51-56
    • /
    • 2013
  • Background: The C-arm fluoroscope is an essential tool for the intervention of pain. The aim of this study was to investigate the radiation exposure experienced by the hand and chest of pain physicians during C-arm fluoroscopy-guided procedures. Methods: This is a prospective study about radiation exposure to physicians during transforaminal epidural steroid injection (TFESI) and medial branch block (MBB). Four pain physicians were involved in this study. Data about effective dose (ED) at each physician's right hand and left side of the chest, exposure time, radiation absorbed dose (RAD), and the distance from the center of the X-ray field to the physician during X-ray scanning were collected. Results: Three hundred and fifteen cases were included for this study. Demographic data showed no significant differences among the physicians in the TFESIs and MBBs. In the TFESI group, there was a significant difference between the ED at the hand and chest in all the physicians. In physician A, B and C, the ED at the chest was more than the ED at the hand. The distance from the center of the X-ray field to physician A was more than that of the other physicians, and for the exposure time, the ED and RAD in physician A was less than that of the other physicians. In the MBB group, there was no difference in the ED at the hand and chest, except for physician D. The distance from the center of the X-ray field to physician A was more than that of the other physicians and the exposure time in physician A was less than that of the other physicians. Conclusions: In conclusion, the distance from the radiation source, position of the hand, experience and technique can correlate with the radiation dose.

이성체 정보를 이용한 토양 중 다이옥신 오염원 해석 (Source Estimation of Dioxin in Soil Using a Congener Pattern)

  • 김종국;김경수;김재식;신선경;정영희;정일록
    • 대한환경공학회지
    • /
    • 제27권3호
    • /
    • pp.316-322
    • /
    • 2005
  • 폐기물 소각시설 주변토양 중 다이옥신 농도를 분석하여 소각시설로부터 거리와 방향에 따른 농도변화를 고찰하고, 시료에 대한 군집분석을 수행하여 발생원이 수용체에 미치는 영향에 대해 검토 하였다. 토양 중 다이옥신 총 농도 및 I-TEQ 농도는 각각 $31.065{\sim}7,257.499\;pg/g\;d.w.$$0.099{\sim}35.191\;pg\;I-TEQ/g\;d.w.$로 나타났다. 조사대상 소각시설 이외의 주변에 소형 소각시설들이 산재해 있어 토양 중 다이옥신 농도와 풍향 및 거리와의 상관성은 약한 것으로 나타났다. 반면 소각시설 배출가스의 영향을 파악하기 위하여 PCDFs와 PCDDs의 비율을 조사한 결과, 소각시설에서 멀어질수록 배출가스에서 높은 비율로 검출되는 PCDFs의 비율이 감소하는 경향을 보였다. 조사대상 소각시설이 주변 토양 중 다이옥신 농도에 미치는 영향권은 500 m 이내인 것으로 판단되었고 먼거리에서 고농도가 검출된 것은 주변에 존재하고 있는 소형 소각시설이나 농약(PCP) 등 다른 오염원에 의한 복합적인 영향을 동시에 받고 있는 것으로 사료되었다. 다이옥신 발생원과 수용체인 토양의 이성체 패턴을 이용한 군집분석 결과, 4개의 그룹으로 나눌 수 있었으며, 각 그룹의 이성체 패턴 비교를 통해 소각시설 배출가스와 농약 등의 발생원이 수용체에 미치는 영향정도에 대해 정성적인 추정이 가능하게 되어 군집 분석이 통계적 수법의 하나로 이용될 수 있을 것으로 사료되었다.

근접 방사선치료용 이리듐 선원의 선량분포에 대한 몬데칼로 시뮬레이션 (Monte Carlo Simulation for Dose Distributions from Ir-192 in Brachytherapy)

  • 김승곤;강정구;이정옥;정동혁;문성록
    • 한국의학물리학회지:의학물리
    • /
    • 제13권4호
    • /
    • pp.187-194
    • /
    • 2002
  • 본 연구에서는 근접 방사선치료용 Ir-192 선윈의 흡수선량에 관한 물리적 특성들을 몬테칼로 계산을 이용하여 조사하였다. 몬테칼로 계산은 EGS4 코드로 수행하였으며 이를 위하여 원통형 선원과 팬텀 그리고 에너지 분포의 입력과 처리가 가능한 사용자 코드를 작성하였다. 베타선에 대한 계산 결과, 베타선들은 선원과 0.5-5.0 cm 거리에서 전체 흡수선량에 평균 0.02% 기여하는 것으로 나타났다. 이것은 초기 베타선들이 선원과 밀봉물질에서 대부분 흡수를 당하지만 이 과정에서 발생한 저에너지 제동복사 광자들이 원거리까지 기여하기 때문이다. 밀봉물질에 의한 흡수선량의 변화는 백금으로 취한 경우에 평균 2.8% 그리고 철로 취한 경우에 평균 1.1% 감소하는 것으로 나타났다. 몬테칼로 계산으로 구한 반경선량함수는 선원과 0.5-10.0 cm 반경거리 구간에 대하여 TG-43 보고서의 값들과 $\pm$3% 이내로 일치하였다. 본 연구에서 작성한 사용자 코드는 다른 종류 및 다른 크기의 선원에 대해서도 계산을 수행할 수 있어서 근접 방사선치료용 선원의 생산 및 가공에 관한 연구에 다양하게 이용될 수 있다.

  • PDF

다중 동력 연료전지 하이브리드 장갑차량의 동력관리 전략에 관한 연구 (A Study on Power Management Strategy for Multi-Power Source Fuel Cell Hybrid Armored Vehicle)

  • 안상준;김태진;이교일
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.361-365
    • /
    • 2005
  • Since the fuel cell uses the hydrogen for its fuel. it has no emission and higher efficiency than an internal combustion engine. Also fuel cell is much quieter than engine generator and generates heat much less than engine generator. So it has advantage of Army's 'si lent watch' capability and the ability to operate undetected by the enemy. The fuel cell hybrid system combines a fuel cell power system with an ESS. The ESS (e.g., batteries or ultracapacitors) reduces the fuel cell's peak power and transient response requirements. It allows the fuel cell to operate more efficiently and recovery of vehicle energy during deceleration. The battery has high energy density, so it has the advantage regarding driving distance. However, it has a disadvantage considering dynamic characteristic because of low power density. One other hand. the ultracapacitor has higher power density, so it can handle sudden change or discharge of required power. Yet. it has lower energy density. so it will be bigger and heavier than the battery when it has the same energy. This paper proposes the power management strategy for multi-power source fuel cell hybrid system. which is applied with the merits of both battery and ultra capacitor by using both of them simultaneous.

  • PDF

Source와 기판 거리에 따른 GaN nanowires의 합성 mode 변화 제어 (Distance between source and substrate and growth mode control in GaN nanowires synthesis)

  • 신동익;이호준;강삼묵;윤대호
    • 한국결정성장학회지
    • /
    • 제18권1호
    • /
    • pp.10-14
    • /
    • 2008
  • GaN nanowires는 수평 VPE법으로 합성 되었다. 본 실험에서는 source와 기판과의 거리가 합성된 GaN nanowires의 형상에 미치는 영향에 대하여 실험하였다. GaN nanowires는 $950^{\circ}C$ 온도에서 Ar 과 $NH_3$ 가스가 각각 1000, 50 sccm 의 유량에서 합성되었다. 합성된 GaN nanowires의 단면형태는 삼각형의 모양을 가졌으며, GaN nanowires의 길이는 200에서 500 nm 정도 였다. 합성된 GaN nanowires의 모양은 FESEM 으로 확인하였고, XRD 분석을 통하여 그 구조가 wurzite 구조인 것을 확인하였다. 또한, HRTEM 사진과 SAED 패턴을 통하여 합성된 GaN nanowires의 표면과 구조를 분석하였다. 성장된 GaN nanowires의 광학적 특성은 PL분석을 통하여 이루어졌다.

UVLED 광원을 이용한 광촉매 VOC 제거 특성 평가시 온도에 따른 농도 변화에 관한 연구 (A Study of the Temperature Dependency for Photocatalytic VOC Degradation Chamber Test Under UVLED Irradiations)

  • 문지연;이규상;김선민
    • Korean Chemical Engineering Research
    • /
    • 제53권6호
    • /
    • pp.755-761
    • /
    • 2015
  • 광촉매의 VOC 제거 특성 평가에 관한 최근의 연구는 온도 변화가 거의 없는 상태에서 실시되었다. 온도 변화를 적게하기 위해 광량이 높은 UVLED를 챔버 위부에 배치하게 되면 광촉매와의 거리가 멀어져 그만큼 효율이 감소할 수 밖에 없으며 광촉매의 효율 향상을 위해서는 광원과 광촉매의 거리를 가까이 해야 할 필요가 있다. 본 연구에서는 UVLED 광원과 광촉매와의 거리를 가까이 두어 온도가 변하는 VOC 제거 시스템을 제작하였다. 광촉매로는 자외선 광원에서 반응하는 상용 $TiO_2$와 vanadium 이온을 도핑시킨 $TiO_2$를 사용하였으며 제작된 챔버를 이용하여 광촉매 효율을 평가하였다. VOC 제거 평가 시 테스트 전후 온도는 약 $20^{\circ}C$ 상승하여 UVLED 광원에 의해 변화된 온도로 VOC의 농도를 보정하여 온도에 따른 VOC 제거 효율 변화를 확인하였다. 보정 전후의 제거 효율을 비교하면 43~46%의 차이를 보였다. 챔버 내 온도 상승이 p-xylene의 농도 변화에 큰 영향을 주며 이를 보정하여 광촉매의 VOC 제거 효율을 평가할 필요가 있음을 확인할 수 있었다.

아크릴 팬톰에서 GafChromic 필름을 이용한 고선량률 근접 치료용 Ir-192 선원의 근접 거리에서 비등방성 측정 (Anisotropy in a Few mm Regions from an Ir192 High Dose Rate Source Measured with a GafChromic Film in Acrylic Phantom)

  • Huh, Hyun-Do;Kim, Seong-Hoon;Park, Jin-Ho;Cho, Byung-Chul;Shin, Dong-Oh;Soo il Kwon;Chun, Ha-Chung;John J K Loh;Kim, Woo-Chul
    • 한국의학물리학회지:의학물리
    • /
    • 제15권2호
    • /
    • pp.94-99
    • /
    • 2004
  • GafChromic 필름은 높은 분해능과 낮은 민감도 그리고 조직 등가 물질에 유사하게 구성되어 있다. 본 연구의 목적은 GafChromic 필름을 이용하여 고선량률 근접치료에 사용하는 Ir-192선원 근접 거리에서의 비등방성을 측정하는 것이다. GafChromic 필름은 0 Gy 105 Gy까지 4 MV 선형가속기를 이용하여 흑화도를 구하였다. 비등방성 값은 아크릴 팬톰에서 GafChromic 필름을 이용하여 측정하였고, 측정된 값은 J. F. Williamson이 몬데칼로 계산한 값과 비교하였다. 비교 결과 거리(r) 2.5 mm, 각도 50 ∼ 130도까지 영역에서 4.4% 이내로 일치하였고 반면 140도 부근에서 17.6% 차이가 나는 것을 알 수 있었고, 한편 거리(r) 5 mm, 각도 35 ∼ 160도까지 3.7% 이내로 일치하였고, 30도 부근에서는 7.6% 정도 차이가 나는 것을 알 수 있었다. GafChromic필름은 고선량률 근접치료 Ir-192선원의 근접 거리에서 비등방성 측정 시 기존에 사용되고 있는 측정 장비보다 매우 유용한 것으로 생각된다.

  • PDF

Influence of EDZ on the Safety of a Potential HLW Repository

  • 황용수;강철형
    • 방사성폐기물학회지
    • /
    • 제2권4호
    • /
    • pp.253-262
    • /
    • 2004
  • Construction of tunnels in a deep crystalline host rock for a potential High-Level Radioactive Waste(HLW) repository inevitably generates an excavation disturbed zone (EDZ). There have been a series of debates on whether a permeability in an EDZ increases or not and what would be the maximum depth of an EDZ. Recent studies show mixed opinions on permeability. However, there has been an international consensus on the thickness of an EDZ; 30 cm for TBM and 1 meter for controlled blast. One of the impacts of an EDZ is on determining the distance between adjacent deposition holes. The void gap by the excavation hinders relaxation of temperature profiles so that the current Korean reference designing distance between holes should be stretched out more to keep the maximum temperature in a buffer region below 100 degrees Celsius. The other impact of an EDZ is on the long-term post closure radiological safety. To estimate the impact, the reference scenario, the well scenario, is chosen. Released nuclides diffuse through a bentonite buffer region experiencing strong sorption and reach a fracture surrounded by a porous medium. Inside a fractured porous region, radionuclides migrate by advection and dispersion with matrix diffusion into a porous medium. Finally, they reach a well assumed to be a source of potable water for local residents. The annual individual dose is assessed on this well scenario to find out the significance of an EDZ. A profound sensitivity study was performed, but all results show that the impact is negligible. Even though the role of an EDZ turns out to be limited on overall safety assessment, still it is worthwhile to study the chemical role of an EDZ, such as a potential source for natural colloids, potential sealing of an open fracture by fine clay particles generated by the process of an EDZ, and alteration of a sorption mechanism by an EDZ in the future.

  • PDF

Analysis of Traffic Noise Propagation around Main Roads in Kwang-ju City

  • Choi, Hyung-II;Cheong, Kyung-Hoon
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제4권1호
    • /
    • pp.1-9
    • /
    • 2000
  • This paper describes an analysis of various factors affecting traffic noise propagation, including the distance from the road, existence of a direct path of noise propagation, density and height of buildings, and procedure for predicting the attenuation of noise levels from roads. The analysis is based on a multiple number of regression models, utilizing the quantification theory of the first kind. This study incorporates a large amount of survey data concerning traffic noise propagation. The survey of the traffic noise propagation around main roads was carried out in several residential areas, mainly in Kwangju. The attenuation of noise levels measured provided 691 usable data samples. A multiple regression analysis demonstrated that the distance from the road makes the most significant contribution to the attenuation of the noise level. The second contributor was found to be the existence of a direct path of noise propagation. The building density and average height of the buildings also affected the attenuation of the noise level considerably. Other factors, such as the height of the building behind the receiver microphone and the number of traffic lanes on the noise-source roads, did not contribute as much to the attenuation of the noise level as the factors mentioned avove.

  • PDF

Zoom-in X-ray Micro Tomography System

  • Chun, In-Kon;Lee, Sang-Chul;Park, Jeong-Jin;Cho, Min-Hyoung;Lee, Soo-Yeol
    • 대한의용생체공학회:의공학회지
    • /
    • 제26권5호
    • /
    • pp.295-300
    • /
    • 2005
  • We introduce an x-ray micro tomography system capable of high resolution imaging of a local region inside a small animal. By combining two kinds of projection data, one from a full field-of-view (FOV) scan of the whole body and the other from a limited FOV scan of the region of interest, we have obtained zoomed-in images of the region of interest without any contrast a nomalies. We have integrated a micro tomography system using a micro-focus x-ray source, a $1248\times1248$ flat-panel x-ray detector, and a precision scan mechanism. Using the cross-sectional images taken with the zoom-in micro tomography system, we measured trabecular thicknesses of femur bones in postmortem rats. To compensate the limited spatial resolution in the zoom-in micro tomography images, we used the fuzzy distance transform for the calculation of the trabecular thickness. To validate the trabecular thickness measurement with the zoom-in micro tomography images, we compared the measurement results with the ones obtained from the conventional micro tomography images of the extracted bone samples.