• Journal of Ocean Engineering and Technology
• /
• 제22권2호
• /
• pp.1-6
• /
• 2008

Recently Oscillating Water Column (OWC) plants have been widely employed in wave energy conversion applications. It is necessary to investigate the chamber and optimize its shape parameters for maximizing air flow and energy conversion due to wave conditions. A 2D numerical wave tank based on a Fluent and VOF model is developed to generate the incident waves and is validated by theoretical solutions. The oscillating water column motion in the chamber predicted by the numerical method is compared with the available experimental data. Several geometric scales of the chamber are calculated to investigate the effect of the shape parameters on the oscillating water column motion and wave energy conversion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제2권4호
• /
• pp.223-230
• /
• 1990

Suspended materials during maritime construction works may cause surrounding environmental changes Therefore, it is important to know the behavior of the muddy water lumps caused by dropping soil in coastal areas. Two-dimensional behaviors of the muddy water moving along the inclined boundaries are investigated experimentally, which are the change of height, length, and moving velocity, the properties of movement at the head of muddy water, the coefficient of entrainment and shape, and the accumulation shape. The shape of the muddy water lumps was similar with the slope thermal. Therefore, the moving characteristics were found to be described using turbulence theory.

• Journal of the Korean Society of Visualization
• /
• 제22권1호
• /
• pp.61-67
• /
• 2024

In this study, the behavior of water droplets on a solid-infused surface was evaluated by quantifying a water droplet's contact angle, sliding angle, and terminal velocity. The contact angle hysteresis and sliding angle of water on the solid-infused surface were measured to be lower than those of the hydrophobic PTFE surface. It led to the enhancement of the initiation of the water droplet's movement. When the capillary number was lower than Ca < 0.004, the terminal velocity of the water droplet on the solid-infused surface was higher than the PTFE surface due to the low contact line resistance. However, the transition of the droplet morphology from a hemispherical shape to a streamlined teardrop shape beyond Ca > 0.004 lost the effect of reducing frictional resistance on the solid-infused surface.

• Communications for Statistical Applications and Methods
• /
• 제31권3호
• /
• pp.309-322
• /
• 2024

Identifying algae in water is important for managing algal blooms which have great impact on drinking water supply systems. There have been various microscopic approaches developed for algae classification. Many of them are based on the morphological features of algae. However, there have seldom been mathematical frameworks for comparing the shape of algae, represented as a planar continuous curve obtained from an image. In this work, we describe a recent framework for computing shape distance between two different algae based on the elastic metric and a novel functional representation called the square root velocity function (SRVF). We further introduce statistical procedures for multiple shapes of algae including computing the sample mean, the sample covariance, and performing the principal component analysis (PCA). Based on the shape distance, we classify six algal species in watersheds experiencing algal blooms, including three cyanobacteria (Microcystis, Oscillatoria, and Anabaena), two diatoms (Fragilaria and Synedra), and one green algae (Pediastrum). We provide and compare the classification performance of various distance-based and model-based methods. We additionally compare elastic shape distance to non-elastic distance using the nearest neighbor classifiers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.602-603
• /
• 2005

• Journal of the Korea Society of Computer and Information
• /
• 제13권1호
• /
• pp.193-202
• /
• 2008

In this study, we want to composite the source image and the target image when the environment includes water surface in the target image such as lake, sea, etc. The water surface is different from other common environment. On the water surface, the object must be reflected or refract and sometimes is deformed by the wave of water. In order to composite the object in the source image onto the water image, we analyze the water surface of the target image and let the object be synthesized realistically based on the wave of water. Our composite process consists of three steps. First. we use Shape-from-Shading technique to extract the normal vector of the water surface in the target image. Next, the source image is deformed according to the normal vector map. Finally, we composite the deformed object onto the target image.

• Journal of applied mathematics & informatics
• /
• 제27권5_6호
• /
• pp.1017-1031
• /
• 2009

The problem of interaction of surface water waves by small undulation at the bottom of a laterally unbounded sea is treated on the basis of linear water wave theory for both normal and oblique incidences. Perturbation analysis is employed to obtain the first order corrections to the reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom undulation. Fourier transform method and residue theorem are applied to obtain these coefficients. As an example, a patch of sinusoidal ripples is considered in both the cases as the shape function. The principal conclusion is that the reflection coefficient is oscillatory in the ratio of twice the surface wave number to the wave number of the ripples. In particular, there is a Bragg resonance between the surface waves and the ripples, which is associated with high reflection of incident wave energy. The theoretical observations are validated computationally.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.105-106
• /
• 2005

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.671-674
• /
• 2005

Atmospheric correction over the ocean part is more important than that over the land because the signal from the ocean is very small about one tenth of that reflected from land. In this study, the Spectral Shape Matching Method (SSMM) developed by Ahn and Shanmugam (2004) is evaluated using Landsat imagery acquired over the highly turbid Saemangeum Coastal Area. The result of SSMM is compared with COST model developed by Chavez (1991 and 1997). In principle, SSMM is simple and easy to implement on any satellite imagery, relying on both field and image properties. To assess the potential use of these methods, several field campaigns were conducted in the Saemangeum coastal area corresponding with Landsat-7 satellite's overpass on 29 May 2005. In-situ data collected from the coastal waters of Saemangeum using optical instruments (ASD field spectroradiometer) consists of ChI, Ap, SS, aooM, F(d). In order to perform SSMM, we use the in-situ water-leaving radiance spectra from clear oceanic waters to estimate the the path radiance from total signal recorded at the top of the atmosphere (TOA), due to the reason that the shape of clear water-leaving radiance spectra is nearly stable than turbid water-leaving radiance spectra. The retrieved water-leaving radiance after subtraction of path signal from TOA signal in this way is compared with that estimated by COST model. The result shows that SSMM enabled retrieval of water-leaving radiance spectra that are consistent with in-situ data obtained from Saemangeum coastal waters. The COST model yielded significantly high errors in these areas.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.309-323
• /
• 2014

Based on the compositions and structures of cement-based materials, the geometrical models of the tortuosity of transport paths in hardened cement pastes, mortar and concrete, which are associated with the capillary porosity, cement hydration degree, mixture particle shape, aggregate volume fraction and water-cement ratio, are established by using a geometric approach. Numerical simulations are carried out to investigate the effects of material parameters such as water-cement ratio, volume fraction of the mixtures, shape and size of aggregates and cement hydration degree, on the tortuosity of transport paths in hardened cement pastes, mortar and concrete. Results indicate that the transport tortuosity in cement-based materials decreases with the increasing of water-cement ratio, and increases with the cement hydration degree, the volume fraction of cement and aggregate, the shape factor and diameter of aggregates, and the material parameters related to cement pastes, such as the water-cement ratio, cement hydration degree and cement volume fraction, are the primary factors that influence the transport tortuosity of cement-based materials.