• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.157-160
• /
• 2006

Recently, trouble of sand supply is occurred according to exhaustion of natural sand resources. To solve this problem, sea sand and crushed sand are used. But, necessity of water reducing agent because quality of concrete that use sea sand and crushed sand is deteriorated. Therefore in this study was examined on the engineering properties of concrete with kind of fine aggregate and addition ratio of water reducing agents. As a result, compressive strength appeared similar standard regardless of kind of fine aggregate. Compressive strength, durability was similar in decrease of the unit water content by increase of addition ratio of the water reducing agent. Also, drying shrinkage resistivity was improved because the unit water content decreased.

• 대한건축학회논문집:구조계
• /
• 제36권1호
• /
• pp.155-162
• /
• 2020

The aim of the research is to investigate the fundamental properties and heat of hydration reducing performance of the fly ash incorporated concrete mixture when the coal gas slag (CGS) from integrated gasification combined cycle (IGCC) is used as fine aggregate. From the results of the experiment, the workability was generally increased and the air content was decreased up to one to four percent with increasing the replacing ratio of CGS to fine aggregate. The compressive strength was similar or increased within five percent to the Plain mixture when the CGS was used as a fine aggregate. When the CGS and fly ash were used same time, the heat of hydration reducing performance was improved than single using cases either CGS or fly ash. Based on the results, for the concrete mixture using CSG as a portion of the combined fine aggregate, the general properties were improved and heat of hydration was decreased approximately 16 % when the fly ash was replaced 30 % to cement and the CGS was replaced less than 50 % to fine aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.743-746
• /
• 2004

This research investigates experimentally an effect on the properties of the high flowing concrete according to variations of concrete materials and site conditions. Variations of sensitivity test are selected items as followings; (1)Concrete temperature, (2)Unit water(Surface moisture of fine aggregate), (3)Fineness modulus of fine aggregate, (4)Addition ratio of high-range water reducing agent. And fresh conditions of the high flowing concrete should be satisfied with required range including slump flow$(65{\pm}5cm)$, 50cm reaching time of slump flow$(4\~10sec)$, V-box flowing time$(10\~20sec)$, U-box height(min.300mm) and air content$(4{\pm}1\%)$. As results of sensitivity test, material variations and site conditions should be satisfied with the range as followings; (1)Concrete temperature is $10\~20^{\circ}C$ (below $30^{\circ}C$), (2)Surface moisture of fine aggregate is within ${\pm}0.6\%$, (3)Fineness modulus of fine aggregate is $2.6{\pm}0.2$ and (4)addition ratio of high range water reducing agent is within $1\%$ considered flow-ability, self-compaction and segregation resistance of the high flowing concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.501-504
• /
• 2006

Recently, the Ceramic Bricks are getting increased due to demolishing aged buildings. But, disposal of the waste ceramic bricks has been relied on just burying into the ground. Regardless they can be used with recycled thick aggregate. Therefore the range of this study includes the experiment of slump test, compression, strength test and stress-strain analysis to the concrete the recycled thick aggregate with made by ceramic bricks. The reducing method of fine aggregate will be reviewed stand on analysis of this experimental result.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.388-391
• /
• 2004

This research investigates how the fineness modulus of fine aggregates and the grain shape of coarse aggregates affects flow characteristics, packing characteristics and compressive strength characteristic. The experimental results, show that increase of the fine aggregate's fineness modulus improved concrete flow, but filling ability was high at over KS regulation extent due to segregation phenomena. It is considered that the improvement of 0.1 spherical rate was effective to concrete fluidity elevation by reducing about $6\%$ of fine aggregate ratio displays which the smallest gap rate of aggregate. Compressive strength was increased to about 0.6MPa everytime F.M. 0.1 of fine aggregate fineness is increased. However, it was decreased to about 9MPa at F.M. 3.5 compared to F.M. 3.0.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.465-468
• /
• 2008

본 연구는 영, 호남 지역의 레미콘 공장에서 현재 사용하고 있는 잔골재의 특성을 분석하고, 혼합사용 시 잔골재율 조정에 따른 콘크리트의 특성실험을 통하여 혼합사용 시 최적조건을 분석한 것으로 그 결과를 요약하면 다음과 같다. 영, 호남에서 사용하는 골재 종류별 물성은 조립률 및 0.08mm체 통과량을 제외하고 모두 KS F 2526 및 KS F 2527의 규정에 적합한 것으로 나타났는데, 각 공장에서는 단독사용이 부적합한 골재를 2종 이상 적절한 비율로 혼합사용하고, KS규정에 적합하게 품질을 관리하고 있었다. 영, 호남 각 공장에서 단위용적질량법에 의해 산출한 잔골재율로 조정한 콘크리트의 배합은 기존의 출하배합보다 높은 유동성을 보이는 것으로 나타났는데, 이는 잔골재율 약 2% 저감에 따라 잔골재의 표면적 감소 및 공극감소에 따른 시멘트 페이스트의 유동성에 미치는 잉여수량의 상대적 증가에 기인한 것으로 분석된다. 따라서 최적 잔골재율을 적용함으로써 단위수량 감소로 인한 경제적인 콘크리트 배합과 콘크리트의 내구성을 증진시키는 효과가 있을 것이라 사료된다.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3511-3517
• /
• 2015

본 지하매설 구조물용 콘크리트는 보수가 어려워 내구성을 극대화할 필요가 있는데, 콘크리트의 건조수축에 의한 균열은 재료의 특성상 발생하는 열화현상으로 대안이 필요하다. 본 연구에서는 건조수축 저감방안의 하나로써 급냉 슬래그 잔골재의 반응에 의한 팽창을 활용하여 콘크리트의 건조수축 발생량을 저감시키고자 하였는데, 실험결과 초기 재령에서 발생되는 수축을 효과적으로 억제하는 것으로 확인되었으며, 급냉 슬래그 잔골재의 치환사용량과 비례하여 전 재령에 거쳐 압축강도가 상승하는 것을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.208-209
• /
• 2017

This study analyzed the fluidity and strength properties of mortar containing high volume blast furnace slag by replacement ratio of lightweight fine aggregate for reducing the unit weight of concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.223-228
• /
• 1997

In this study, bottom ash, lightweight aggregate, and Expanded Polystyrene was used to lighten the mortar. In order to compensate the reduction of strength caused by lightening, the waste foundry sand produced as solid waste was substituted for fine aggregate. As the device of reducing the ratio of absorption, the procedure of mixture was altered to check the effectiveness of surface coating of porous lightweight aggregate. It was observed over 170kg/$\textrm{cm}^2$ compressive strength at gravity about 1.3, an over 380kg/$\textrm{cm}^2$ at gravity about 1.7. the maximum strength was occurred when 30% of fine aggregate was replaced was replaced with waste foundry sand, and the ratio of absorption was decreased over 10% by changing the procedure of mixture.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.35-40
• /
• 2010

최근에 들어 투수콘크리트의 동결융해에 대한 저항성이 저하되는 것과 줄눈부에서의 골재박리 등의 많은 문제점들이 대두되고 있다. 따라서 본 연구에서는 기존의 투수콘크리트의 내구성을 향상시키기 위한 방안으로 잔골재와 실리카흄, 고성능감수제를 사용하여 강도 및 내구성 증진 방안을 연구하였다. 주요실험인자로 실리카흄 혼입률 10%와 잔골재 혼입률(0%, 7%, 15%)을 선정하고, 압축강도와 휨강도, 투수계수 및 공극률, 동결융해시험을 수행하였다. 실험결과 강도측면에서는 잔골재 혼입률이 증가함에 따라 압축 및 휨강도는 증가하는 경향을 보였으나, 상대적으로 공극률 감소로 인한 투수성은 저하되고, 동결융해 저항성도 크게 감소하는 것으로 나타났다. 따라서 투수콘크리트에 있어서 강도증진을 위해 사용되는 잔골재는 혼입률 제한이 필요하며, 실리카흄 10%이상을 사용하는 것이 강도 및 내구성 측면에서 효율적인 대안이 될 수 있을 것으로 판단된다.