• The Korean Journal of Pharmacology
• /
• v.9 no.1
• /
• pp.39-46
• /
• 1973

It has been reported previously that 2,2-methylene bis(3,4,6-trichlorophenoxy acetic acid) (MTPA) is effective treating for clonorchiasis and less toxic to the hosts. In this studies the absorption, distribution and excretion of MTPA were observed. For this purpose $^{14}C-MTPA$ was synthesised from bis(2-hydroxy-3,5,6-trichlorophenoxyl) methan $^{14}C$ and administerd to the normal rabbit in a single dose of 10mg/kg IV or 20 mg/kg P.O. or to the Clonorchis infected rabbit in dose of 20 mg/kg/day for 6 days. Radioactivity in blood, tissue, bile, urine, feces and tissue of the fluke was measured after the drug was given. The concentration of MTPA in these samples were calcurated from the radioactivity. The result obtained as followes. 1. The increase in concentration of MTPA in blood and urine after oral administration of MTPA was so slow that the absorption of MTPA from the gastrointestinal tract appears very slow. 2. It is presumed that the excretion of MTPA also is slow because the reduction of MTPA concentration in blood after IV injection was very slow. 3. Large amount of MTPA was excreted from the bile. 4. During repeat dose of 20mg/kg/day for 6 days the concentration of MTPA in blood and tissue gradually increased. 5. The highest concentration of MTPA in the kidney and liver, heart, lung, spleen and muscle in decreasing order and the lowest concentration in the brain was noted. 6. During daily dose of 20 mg/kg of MTPA for 6 days of administration the concentration of MTPA gradually increased in urine and feces and the concentration of MTPA in feces was higher than of in urine. It appeares that MTPA take place enterophepatic circulation. 7. It is assumed that accumulation in large amount of MTPA in the liver and tissue of clonorchis, excretion of large amount from the bile is a favorable property of MTPA as a chemotherapeutic agent for clonorchiasis.

• Journal of the Korea Concrete Institute
• /
• v.28 no.1
• /
• pp.3-11
• /
• 2016

The concern about hollow core PC slab has been increased to improve the workability during a construction of building by reducing self weight of structural members. In this manner, recently, TRS (Tripple Ribs Slab) was developed as a new type of half PC slab system. TRS member consists of the triple webs and the bottom flange prestressed by strands. The slab system is completed by casting of topping concrete on the TRS after filling styrofoam between the webs. This paper, presents a flexural experiment to investigate the flexural capacity of the TRS. Five full scale TRS members were made and tested under simple support condition to be failed by flexure and their strength was evaluated by code equations; the variables in the test are the depth and the presence of topping or raised spot formed when slip-forming. In addition, a nonlinear sectional analysis was performed for the specimens and the result was compared with the test results. From the study, it was found that the TRS has enough flexural strength and ductility to resist the design loads and its strength can be suitably predicted by using code equations. The raised spot did not affect the strength so that the spot need not to be removed by doing additional work. For the more accurate prediction of TRS's flexural behavior by using nonlinear sectional analysis, it is recommended to consider the concrete's brittle property due to slip-forming process in the modeling.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.923-928
• /
• 1993

The series of solid solutions in the $Sr_{1+x}Ho_{1-x}FeO_{4-y}$ (x = 0.00, 0.25, 0.50, 0.75 and 1.00) systems with $K_2NiF_4$ type structure have been prepared at 1550$^{\circ}$C under an atmospheric air pressure. The X-ray powder diffraction spectra of these samples assign that the crystallographic phases are tetragonal system over the whole x range. The lattice volume was increased with increasing the substitution amount of the $Sr^{2+}$ ion. The mole ratio of the $Fe^{4+}$ ion to total iron ions or ${\tau}$ value has been determined by Mohr salt titration of the sample and then the y value was calculated from x and ${\tau}$ values. The ${\tau}$ and y values have been increased with x values. The nonstoichiometric chemical formula are formulated from the general formula of $Sr_{1+x}Ho_{1-x}Fe^3_{1-}\;^+_{\tau}Fe_{\tau}^{4+}O_{4-y}$ replaced by x,${\tau}$ and y values. Mossbauer spectra show the mixed valence state and coordination state of $Fe^{3+}\;and\;Fe^{4+}$ ions. It is found out that the magnetic property of the samples is paramagnetic at room temperature. Electrical conductivity varied within the semiconductivity range of 1.0 to 1 ${\times}\;10^{-9}{\Omega}^{-1}cm^{-1}$. Activation energy of the electrical conductivity was decreased with the $\tau$ value. The conduction mechanism should be explained by the hopping model of the conduction electrons between the valence states of $Fe^{3+}\;and\;Fe^{4+}$ ions.

• Journal of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.211-218
• /
• 1991

A series of samples in the $Nd_{-x}Sr_{x}CoO_{3-y}$ system (x = 0.00, 0.25, 0.50, 0.75 and 1.00) have been produced by heating the reactants at 1200${\circ}$C under atmospheric pressure. The solid solutions were analysed by X-ray diffraction spectra, thermal analysis, and SEM micrographs. X-ray powder diffraction assigns the compositions of x = 0.00, 0.25, 0.50 and 0.75 to the cubic system and the composition of x = 1.00 to the orthorhombic system. The reduced lattice volume is increased with increasing x values in the system. The mole ratio of $Co^{4+}$ or ${\tau}$ values are determined by the Iodometric titration method and are maximum at the composition of x = 0.50. The magnetic measurement shows that a ferromagnetism is appeared in the compositions of x = 0.00, 0.25, 0.50 and 0.75 and then an antiferromagnetism in the composition of x = 1.00. The measurement of the electrical conductivity shows that the semiconductivity is appeared in the composition of x = 0.00, 0.25 and 1.00 and the metallic conductivity in the composition of x = 0.50 and 0.75. The magnetic and electrical properties of the samples are discussed with the nonstoichiometric chemical formulas.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.189-201
• /
• 2017

This study focused on the Gaya mural tomb located in Goa-ri, Goryeong-gun, North Gyeongsang Province, Republic of Korea. Environmental factors such as ambient temperature, relative humidity and surface temperature, and microbial distribution on mural tombs were monitored for one year to gather data on the conservation environment of the mural tombs. The average internal temperature difference with reference to the ambient outer temperature was observed to be $11.7^{\circ}C$ for the monitoring period and the internal temperature of the tomb was found to change periodically every one or two months in response to the outer temperature. The highest temperature was observed in September and the lowest in March. The relative humidity in the mural tomb remained constant at 100%. Between December and April, condensation occurred on the ceiling of the main room of the tomb, where the murals are located. On the ceiling of the aisle, the condensation occurred throughout the year. The inside and surface wall were isolated from microorganisms, which could grow when a suitable growth environment suitable is established. Based on microbial growth temperature conditions, risk periods of microbial hazards were established, where in the period from August to October was identified as the most dangerous.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.295-301
• /
• 1996

A series of solid solutions of the $CaGa_1-xFexO_3-y$ system with the compositions of x=0.25, 0.50, 0.75, and 1.00 has been prepared at $1150^{\circ}C$ under an atmospheric air pressure. The structure, nonstoichiometric chemical formula, and the distribution of cations for the solid solutions are determined by X-ray diffraction analysis, Mohr salt titration, Mossbauer spectroscopic analysis. Their physical properties are discussed with electrical conductivity and magnetic measurements. The crystal system of all the compositions is a brownmillerite orthorhombic system from the X-ray diffraction analysis and the reduced lattice volume increases linearly with x value except that of the composition of x=0.25. All the solid solutions do not contain $Fe^{4+}$ ion and the mole number of oxygen vacancies or y value is 0.50 from Mohr salt analysis. The oxidation state of Fe ion, the coordination state, the structure change in the Brownmillerite-type structure, and the distribution of $Ga^{3+}$ and $Fe^{3+}$ ions are discussed with Mossbauer spectroscopic analysis. The electrical conductivity increases and activation energy decreases, as x value increases. The traditional semiconducting property of this system is described in terms of band theory. The compositions of x=0.50∼1.00 show a thermal magnetic hysteresis in the magnetic measurement with the cooling conditions, which is discussed in terms of the space group and Dzyaloshinsky-Moriya interaction.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.546-551
• /
• 2005

The new developed production process and the coating equipment were used to prepare the alginate coated rice having functional property. Then, the quality characteristics such as proximate analysis, moisture sorption properties, influence on the retrogradation, sensory evaluation were investigated. The moisture content of the alginate coated rice was $16.5-18\%$ which is $1.5\%$ higher than the normal rice. About $0.3\%$ alginate was coated on the rice by the measurement of carbohydrate content after coating with $2\%$ alginate. The rice coated with higher alginate concentration showed the higher moisture absorption. The rice coated with $2\%$ alginate solution stored $30^{\circ}C$ and $85\%$ RH conditions for 6 weeks and it increased $1.8\%$ of the moisture content The alginate coated rice has delayed the retrogradation more than 6 hrs as well as got the higher scores for the appearance, stickiness, and taste. The alginate coated rice is a good source of the fiber in the nutritional aspect and it improves the quality and functionality of the rice.

• Korean Journal of Veterinary Research
• /
• v.34 no.3
• /
• pp.517-527
• /
• 1994

An attempt was made to isolate a causative viral agents from the fecal specimens of the diseased dogs with the gastroenteritis symptoms. Two coronavirus-like agents were isolated by serial dilution end point method and plaque assay. The isolates were characterized in terms of cytopathology, antigenicity, replication, physicochemical and morphological properties. The results obtained through the experiment were as follows; 1. Among 7 fecal specimens collected from the dogs with enteric disease, 2(28.6%)coronavirus-like agents showing typical cytopathic effects of canine coronavirus were isolated, and designated as CCV D1 and CCV D2, respectively. 2. By the cross-neutralization test and indirect immunofluoresence antibody test, the isolates were antigenically indentified as the standard CCV. The viruses were replicated only in the cytoplasm of A-72 cells. 3. The isolates showed no haemagglutinating activity against the erythrocytes from 11 kinds of animals. 4. The electron microscopic observation for the isolates showed spherical and pleomorphic features, covered with club-shaped projections on the surface. The size of particles was ranged from 70 to 150nm. 5. In one-step growth curve for the isolates in A-72 cells, maximum titers of intracellular vius was $10^{4.6}$ $TCID_{50}/0.1ml$ at 46 hrs postinoculation(pi) of CCV Dl and $10^{4.4}$ $TCID_{50}/0.1ml$ at 34 hrs pi of CCV D2. The maximum titers of extracellular virus was $10^{5.5}$ $TCID_{50}/0.1ml$ at 58 hrs pi of CCV D1 and $10^{5.8}$ $TCID_{50}/0.1ml$ at 46 hrs pi of CCV D2. 6. In physicochemical property test, the isolates were very sensitive to choroform and were found to be RNA virus. The viruses was stable at pH 3.0 for 1 hr and at $22{^{\circ}C}$ for 5 hrs. However, infectivity titers reduced remarkably by treatment with $56{^{\circ}C}$ for 10min.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.19-26
• /
• 2006

In this study, psychological assessment was carried out to investigate the driver's psychological characteristics by the change of the headlight. The participants were 20 men and 20 women in their 20s and thirty-two different conditions in combinations of waveform of light, voltage, and alteration time were used. The questionnaire for the assessment was evaluated by 8 subjective item and 5-point SD criteria of 19 pair's adjective. The results were as follows : 1. The assessment results from SD method indicated 4 factors by factor analysis, and it was shown that A waveform had significances in a sense of security and impetus and B waveform had a significance in a sense of security. The levels of the limitations for the voltage change were 12[V] in the factor of a sense of security and 11[V] in the factor of a sense of impetus for A waveform, 12.6[V] in the factor of a sense of security for B waveform. 2. The results of the subjective assessment showed that the limitation of A waveform's brightness change was 12[V]. Moreover, the limitations of voltage changes were 12.67[V] for B waveform brightness change, 12.12[V] for discomfort, 12.71[V] for darkness. And the limitation of C waveform's brightness change was 12[V].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.229-229
• /
• 2010

With the scaling down of ultra large integrated circuits (ULSI) to the sub-50 nm technology node, the need for an ultra-thin, continuous and conformal diffusion barrier and Cu seed layer is increasing. However, diffusion barrier and Cu seed layer formation with a physical vapor deposition (PVD) method has become difficult as the technology node is reduced to 30 nm and beyond. Recent work on self-forming barrier processes using PVD Cu alloys have attracted great attention due to the capability of conformal ultra-thin barrier formation using a simple technique. However, as in the case of the conventional barrier and Cu seed layer, PVD of the Cu alloy seed layer will eventually encounter the difficulty in conformal deposition in narrow line trenches and via holes. Atomic layer deposition (ALD) has been known for its good step coverage and precise thickness control, and is a candidate technique for the formation of a thin conformal barrier layer and Cu seed layer. Conformal Cu-Mn seed layers were deposited by plasma enhanced atomic layer deposition (PEALD) at low temperature ($120^{\circ}C$), and the Mn content in the Cu-Mn alloys were controlled form 0 to approximately 10 atomic percent with various Mn precursor feeding times. Resistivity of the Cu-Mn alloy films decreased by annealing due to out-diffusion of Mn atoms. Out-diffused Mn atoms were segregated to the surface of the film and interface between a Cu-Mn alloy and $SiO_2$, resulting in self-formed $MnO_x$ and $MnSi_xO_y$, respectively. No inter-diffusion was observed between Cu and $SiO_2$ after annealing at $500^{\circ}C$ for 12 h, indicating an excellent diffusion barrier property of the $MnSi_xO_y$. The adhesion between Cu and $SiO_2$ was enhanced by the formation of $MnSi_xO_y$. Continuous and conductive Cu-Mn seed layers were deposited with PEALD into 32 nm $SiO_2$ trench, enabling a low temperature process, and the trench was perfectly filled using electrochemical plating (ECD) under conventional conditions. Thus, it is the resultant self-forming barrier process with PEALD Cu-Mn alloy film as a seed layer for plating Cu that has further potential to meet the requirement of the smaller than 30 nm node.