• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.2
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2002

In order to increase the magnetic properties of a Nd-Fe-B sintered magnet, the general factors including particle size and its distribution, volume fraction of Nd$_2$Fe$_{14}$B phase, degree of alignment of Nd$_2$Fe$_{14}$B grain, oxygen content and grain size etc. should be optimized by controlling the composition of Nd-Fe-B alloy as well as the manufacturing process. In this study, fabrication of the Nd-Fe-B sintered magnet was carried out in a laboratory scale by controlling the composition of Nd-Fe-B alloy and the manufacturing process. The optimum milling condition was found by investigating the milling media, milling time and ball size. The addition of FeGa was effective to increase the coercivity of the Nd-Fe-B sintered magnet. A remanence of 14.4 kG, a coercivity of 9.4 kOe and a maximum energy product of 47 MGOe were obtained from the sintered magnet.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.219-229
• /
• 2016

The purpose of this study was to investigate the dyeability of silk fabrics with sweet potato stem leaf extract. To obtain the optimal dyeing conditions it was examined at various dyeing conditions(temperature, pH, time and bath ratio). The dyeability and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. After dyeing, various color fastness(wash fastness, dry cleaning fastness, light fastness, rub fastness, and perspiration fastness) was measured and reviewed for UV protective, deodorant and antimicrobial functionality. The optimun output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 80 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and mordanting, it was found that among four mordants of $Alk(SO_4)_2$, $CuSO_4$, $SnCl_2$, and $FeSO_4$, post-mordanting with $SnCl_2$ showed the best results. Color fastness to dry cleaning, washing and rubbing was found strong at grade 4-5 and the grade to perspiration was as good as 3 while to light fastness was good at 4 as well. In aspects of functional properties, it showed excellent results of 98.3% UV protection rate and 88% deodorization rate. Antibacterial activity was 99.9% against staphylococcus aureus and 73.3% against klebisella pneumoniae. In conclusion, we validated that the dyestuffs from the disused sweet potato stem leaf extract would be useful as a natural dye material using the optimized conditions and dyeability for silk dyeing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.273-281
• /
• 2002

Recently, demand for real-time data and multimedia data is rapidly increasing, and it is impossible for mobile Ad Hoc networks with only best effort service to efficiently transfer such data. So, we absolutely need the QoS service which reserves the communication resources in advance. The existing routing protocols, which assume that the links between nodes are bidirectional, provide the convenience for the route discovery and maintenance, but can not support the routing function for the unidirectional links due to the wireless link property easily changing with time under the real wireless environment. In order to solve such problems, in this dissertation we suggested a unidirectional QoS routing a waste of communication resources. The waste of protocol that supports unidirectional links and reduces communication resources is reduced by establishing the shortest route suitable to QoS support, considering in advance the usable communication resources at each node.

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.524-530
• /
• 2016

Purpose: The properties of starch and starch gel prepared from a newly inbred sweet potato, Daeyumi were compared to the properties of starch and starch gel prepared from Sinyulmi which is a well known mealy type sweet potato. Methods: The starch was isolated by using the alkaline steeping method. Physicochemical, pasting, and thermal properties, and crystallinity were measured. The texture properties of starch gel (10%, w/w) were examined. Results: The amylose contents of Daeyumi and Sinyulmi starches were 25.57% and 22.59%, respectively. The initial pasting temperature of Daeyumi starch was significantly higher than that of Sinyulmi starch (p<0.05), but other paste viscosities were not different. The peak and conclusion temperatures of Daeyumi starch were higher than those of Sinyulmi starch by differential scanning calorimetry. The shape of Daeyumi starch gel was more clear and rigid than the shape of Sinyulmi starch gel. The surface and the upper side of Daeyumi starch gel were smoother than the surface and the upper side of Sinyulmi starch gel. Hardness and gumminess were higher in Daeyumi starch gel than in Sinyulmi starch gel. The crystallinity types of Daeyumi and Sinyulmi starches were $C_b$ and A types, respectively, but starch gels showed an amorphous type. Conclusion: Therefore, it is suggested that Daeyumi starch would have better physicochemical properties and higher quality of starch gel than Sinyulmi starch.

• Elastomers and Composites
• /
• v.15 no.3
• /
• pp.147-154
• /
• 1980

The cellular rubber products for industrial purpose have been applied in many fields such as auto-motive parts, ship-building, machinery, sports goods, diving suit or interior housings etc. The purpose of this dissertation is to study the physical properties of celluar rubber products particulary for those elastomers such as EPDM, CR and NBR with heat resistance property, weather proofness, and oil resistance characteristics respectively, aiming at improving their quality, and renovating the manufacturing know-how which is beyond our technical power at the present time in Korea. In order to meet this requirement an ideal recipe is being shown for the three elastomers, and also a practical recipe which is easily available in terms of compounding ingredients in domestic market has set up as shown in Table 1. for the investigation of vulcanization characteristics by means of Rheometer. The optimum Mooney viscosity of compounded rubber was found to be approximately $ML_{1+4}(100^{\circ}C)$ $30\sim45$. Excess mustication makes a dispersion of ingredients worse, consequently it causes deformation of shapes and heterogenous cell distribution. In other words the articles are rejected because of its insufficient workmanship. The results of physical properties of the products are indicated in Table 3. It has shown that the quality meet requirement when tested in accordance with ASTM D572, 573 and D 395. The test results o CR/IR blends in terms of hardness, volume change by blowing, tensile strength and elongation have been shown.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.335.2-335.2
• /
• 2016

The fixed negative charge of the Al2O3 passivation layer gives excellent passivation performance for both n-type and p-type silicon wafers. For the best passivation quality, annealing is known to be a prerequisite step and a lot of studies concerning annealing effect on the passivation characteristics have been performed. Meanwhile, for manufacturing a crystalline silicon solar cell, firing process is applied to the Al2O3 passivation layer. Therefore, study on not only annealing effect but also on firing effect is necessary. In this work, Al2O3 passivation performance (minority carrier lifetime) for p-type silicon wafer was evaluated with Quasi-Steady-State Photoconductance(QSSPC) measurement after annealing at different temperatures. For the samples which showed different aspects, C-V measurement was performed for the cause - whether it is due to the chemical effect or field-effect. The change in Al2O3 passivation property after firing processes was investigated and the mechanism for the change could be estimated.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.24 no.1
• /
• pp.25-35
• /
• 2011

Objective : The present study was designed to assess the potential inhibitory activity of an ethanol extract of Belamcandae Rhizoma (EBR) on the alpha-melanocyte stimulating hormone (${\alpha}$-MSH)-induced melanogenesis signal pathway in B16F10 melanoma cells. Methods : Several experiments were performed in B16F10 melanoma cells. We studied tyrosinase activity, melanin content, cell-free tyrosinase activity and DOPA stain, and performed Western blots and RT-PCR for proteins and mRNA involved in melanogenesis. Results : ${\alpha}$-MSH-induced tyrosinase activity and melanin content were inhibited significantly by EBR. EBR markedly suppressed the protein expression level of tyrosinase in B16F10 melanoma cells. On the other hand, the expression of tyrosinase-related protein-1 (TRP-1) and -2 (TRP-2; DCT) were not affected by EBR. To elucidate the mechanism of the depigmenting property of EBR, we examined the involvement EBR in cAMP response element binding (CREB) protein phosphorylation and microphthalmia-associated transcription factor (MITF) signalling induced by ${\alpha}$-MSH. EBR did not regulate CREB phosphorylation and MITF expression by ${\alpha}$-MSH. Nevertheless, the mRNA expression of tyrosinase was significantly attenuated by EBR treatment without changes in the expression of TRP-1 and -2 mRNA. Conclusion : Our study suggested that EBR inhibits ${\alpha}$-MSH-induced melanogenesis by suppressing tyrosinase mRNA.

• The Korean Journal of Community Living Science
• /
• v.23 no.4
• /
• pp.537-552
• /
• 2012

This study was conducted to investigate the quality characteristics of cooked rice with cereals frequently consumed in Korea by blending ratio. Seven kinds of cereals, white rice, glutinous barley, brown rice, black rice, glutinous rice, glutinous foxtail millet and proso millet, were chosen for the study. According to the results from rapid viscosity analyzer, glutinous barley had the lowest pasting temperature($66.55^{\circ}C$) and black rice had the highest values in the peak(231.77 RVU), trough(162.25 RVU), final viscosity(295.81 RVU) and set back(64.05 RVU)(p<0.05). Water absorption rate by soaking time for black rice and brown rice was increased only 18.77% and 14.57%, respectively, even after 120 minutes, whereas those of other cereals were increased up to 20.28~39.32% after 50 minutes. The pasting characteristics of white rice blended with cereals tended to be lower than white rice in the peak, trough, and final viscosity. Textural property of cooked white rice blended with black rice, brown rice, and glutinous foxtail millet showed a significantly higher value for hardness than that of cooked white rice only(p<0.05). The most preferred blending ratio of the respective cereals was 25% for glutinous barley, 10% for black rice, brown rice and proso millet, and 5% for glutinous foxtail millet and glutinous rice in the sensory evaluation for overall quality, but there were no significant differences except glutinous barley, brown rice and glutinous foxtail millet.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.145-152
• /
• 2000

In order to select an effective antibiotic substance against oral resident bacteria, we were isolated from soil and texonomically analyzed. Seven hundred and eighteen strains were isolated on humic acid- vitamin agar(HV agar) and 220 strains were on methanol medium from three each paddy forest, field and riverside soil samples. So, during the screening of antibiotics from soil, we isolated microorganisms showing powerful antagonistic activity against oral resident bacteria. Microorganism was tested against 25 strains of bacteria, yeast and fungi. Among them, No. 248 strain exhibited the most strongly growth inhibition. So, the taxonomical analysis the isolated strain was found to be unknown Actinomyces sp. and was named No 248. A production of the antibiotics from No. 248 begins at the early exponential phase developed at the 72th hour under the optinum conditions. The property of No. 248 antimicrobial compound was very stable under acid(pH 3.0) and alkali(pH 10.0) treatment, but it was instable in heat treatment at $120^{\circ}C$. For the improvement of antibiotic activity, two mutants were isolated from strain No. 248 by the treatment of mutagenic agents, NTG and hydroxylamine. As a result, the mutant strains excreted the potent antibiotics to inhibit the growth of Candida albicans.