• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.69-73
• /
• 1991

The effects of disk surface velocity on the microstructures and magnetic properties of ${(Nd_{0.8}Dy_{0.2})}_{12}Fe_{80}B_8$ melt-spun ribbons were investigated. From the X-ray diffraction results. it is confirmed that the lower the surface velocity ($V_{s}$), the better the orientation of c-axis normal to the ribbon plane. The results of magnetic property measurements for the powder solidfied in magnetic field showed that the highest remanence was obtained from the alloy quenched at medium velocity of $V_{s}=14.6m/s$. The remanence of the powder solidfied in magenetic field was about 10 % higher than that of the powder solidfied in non-magnetic field.

• Herbal Formula Science
• /
• v.21 no.1
• /
• pp.36-50
• /
• 2013

Objectives : To clarify the possible effect of Lycium chinese Mill (LC)., Morus alba L (MA)., and Lycium chinese Mill. +Morus alba L. (LC+MA), we have examined their influence on the development of pulmonary eosinophilic inflammation in the asthmatic murine model. Methods : Female Balb/c mice (5weeks) were immunized on two different days (21 days and 7 days before inhalational exposure) by intraperitonial injections of 0.2ml alum-precipitated Ag containing $100{\mu}g$ of OVA bound to 4 mg of aluminum hydroxide in PBS. Seven days after the second sensitization, mice were exposed to aerosolized ovalbumin for 30 minutes/day on 3 days/week for 8 weeks (at a flow rate of 250 L/min, 2.5% ovalbumin in normal saline) and, LC, MA, and LC+MA (500 mg/kg) were orally administered 3 times per a week for 8 weeks. Results : The suppressive effect of LC, MA, and LC+MA were demonstrated by the accumulation of eosinophills into airways, with the reduction of eosinophil, total lung leukocytes numbers. These were correlated with the marked reduction of IL-5, IL-13 and IL-4 levels in the BALF and serum. OVA-specific IgE levels were also decreased in serum and BAL from these mice. LC, MA, and LC+MA decreased eosinophil CCR3 expression and CD11b expression in lung cells. Conclusions : These results indicate that LC, MA, and LC+MA have high inhibitory effects on airway inflammation and hyper-responsiveness in the asthmatic murine model. The suppression of IL-5, IgE, eosinophil CCR3 expression and CD11b expression, and the increase of IFN-${\gamma}$ production in BALF seem to contribute to this effect. Hence, the results indicated that LC, MA, and LC+MA could act as a immuno-modulator which possesses anti-inflammatory and anti-asthmatic property by modulating the imbalance between Th1 and Th2 cytokines.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.691-698
• /
• 2010

Magnesium hydroxide-melamine core-shell particles were prepared through the coating of melamine monomer on the surface of magnesium hydroxide in the presence of phosphoric acid. The melamine monomer was dissolved in hot water but recrystallized on the surface of magnesium hydroxide by quenching to room temperature in the presence of phosphoric acid. The core-shell particle was applied to low-density polyethylene/ ethylene vinyl acetate (LDPE/EVA) resin by melt-compounding at $180^{\circ}C$ as flame retardant. The effect of magnesium hydroxide and melamine content has been studied on the flame retardancy of the core-shell particles in LDPE/EVA resin according to the preparation process and purity of magnesium hydroxide. Magnesium hydroxide prepared with sodium hydroxide rather than with ammonia solution revealed higher flame retardancy in core-shell particles with LDPE/EVA resin. At 50 wt% loading of flame retardant, core-shell particles revealed higher flame retardancy compared to that of the exclusive magnesium hydroxide in LDPE/EVA composite, and it was possible to satisfy the V0 grade in the UL-94 vertical test. The synergistic flame retardant effect of magnesium hydroxide and melamine core-shell particles was explained as being due to the endothermic decomposition of magnesium hydroxide and melamine, which was followed by the evolution of water from the magnesium hydroxide and porous char formation due to reactive nitrogen compounds, and carbon dioxide generated from melamine.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.55-55
• /
• 2018

Recently, amorphous oxides such as InGaZnO (IGZO) and InZnO (IZO) as a channel layer of an oxide TFT have been attracted by advantages such as high mobility, good uniformity, and high transparency. In order to apply such an amorphous oxide TFTs to a display, the stability in various environments must be ensured. In the InGaZnO which has been studied in the past, Ga elements act as a suppressor of oxygen vacancy and result in a decreased mobility at the same time. Previous studies have been showed that the InZnO, which does not contain Ga, can achieve high mobility, but has relatively poor stability under various instability environments. In this study, the TFTs using $IZO/Al_2O_3$ double layer structure were studied. The introduction of an $Al_2O_3$ interlayer between source/drain and channel causes superior electrical characteristics and electrical stability as well as reduced contact resistance with optimally perfect ohmic contact. For the IZO and $Al_2O_3$ bilayer structures, the IZO 30nm IZO channels were prepared at $Ar:O_2=30:1$ by sputtering and the $Al_2O_3$ interlayer were depostied with various thickness by ALD at $150^{\circ}C$. The optimal sample exhibits considerably good TFT performance with $V_{th}$ of -3.3V and field effect mobility of $19.25cm^2/Vs$, and reduced $V_{th}$ shift under positive bias stress stability, compared to conventional IZO TFT. The enhanced TFT performances are closely related to the nice ohmic contact properties coming from the defect passivation of the IZO surface inducing charge traps, and we will provide the detail mechanism and model via electrical analysis and transmission line method.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.3
• /
• pp.128-136
• /
• 2014

In the present study, we successfully developed an eco-friendly chemical etching solution and proper condition for plating on ABS material. The mechanism of forming Ni plating layer on ABS substrate is known as following. In general, the etching solution used for the etching process is a solution of chromic acid and sulfuric acid. The etching solution is given to the surface resulting in elution of butadiene group, so-called anchor effect. Such a rough surface can easily adsorb catalyst resulting in the increase of adhesion between ABS substrate and Ni plating layer. However a use of chromic acid is harmful to environment. It is, therefore, essential to develop a new alternative solution. In the present study, we proposed an eco-friendly etching solution composed of potassium permanganate, sulfuric acid and phosphoric acid. This solution was testified to observe the surface microstructure and the pore size of electrical Ni plating layer, and the adhesive correlation between deposited layers fabricated by electro Ni plating was confirmed. The result of the present study, the newly developed, eco-friendly etching solution, which is a mixture of potassium permanganate 25 g/L, sulfuric acid 650ml/L and phosphoric acid 250ml/L, has a similar etching effect and adhesion property, compared with the commercially used chromium acid solution in the condition at $70^{\circ}C$ for 5 min.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.

• Journal of Wetlands Research
• /
• v.12 no.2
• /
• pp.1-12
• /
• 2010

This study examined geological characteristics of a wetland in Mountain Geumjeong in Busan Metropolitan City. Field survey and laboratory tests were performed to identify topographic features, geological and structural geological characteristics, rock strength along the distance from the wetland, soil profile in the wetland, and chemical property of the wetland soil. The bedrock of the wetland consists of hornblende granite. Hornblende granite and rhyolitic rock around the wetland have the joints with strikes of N-S, E-W, and NE-SW directions and with higher dips greater than $60^{\circ}$. Lower rock strength and higher weathering grades take place towards the wetlands. According to X-ray diffraction analysis of wetland soil samples, kaolinite, montmorillonite, and gibbsite appear which demonstrate weathered products of feldspars in the hornblende granite. The soil profile in the wetland comprises O, A, B, and C horizons from the land surface. The contents of the organic matters decrease from shallow parts to deeper parts of the soil profile. In addition, $K^+$ and $Na^+$ originating from the weathering of feldspars are dominant components among inorganic ions in the wetland soil.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.4
• /
• pp.244-251
• /
• 2017

Background: The application of crop rotation systems may reduce the occurrence of soil-borne diseases by releasing allelochemicals and by subsequent microbial decomposition. Methods and Results: For reduction of ginseng root rot by the crop rotation system, after harvesting 6-year-old ginseng, fresh ginseng was grown along with continuous cultivation of sweet potato, peanut, and bellflower. Growth of 2-year-old ginseng was significantly inhibited in the continuous cultivation than in the first cultivation. Sweet potato, peanut and bellflower cultivations assisted in obtaining normal yields of ginseng in the first year after the harvest of 6-year-old ginseng. Salt concentration, potassium and sodium contents were gradually decreased, and, organic matter was gradually increased through cirp rotation. Phosphate, calcium and magnesium contents were not altered. The density of the root rot fungus was gradually decreased by the increase in crop rotation; however it was decreased distinctly in the first year compared to the second and third year. The severity of root rot disease tended to decrease gradually by the increase of crop rotation. Conclusions: Short-term crop rotation for three years promoted the growth of ginseng, however root rot infection was not inhibited significantly, although it was somewhat effective in lowering the density of the root rot pathogen.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.770-778
• /
• 2010

Bamboo leaf powder was added to Jeolpyun to increase the neutraceutical effects and storage period. The bamboo leaf powder was added to rice flour at ratios of 0, 4, 6, 8, and 10% (w/w), and they were treated with aqueous malt extract to extend storage. The Jeolpyun was stored at $20^{\circ}C$ for 72 hr, and the physical and sensory characteristics were evaluated. As a result, the crude fat, crude protein, moisture, crude ash and total dietary fiber contents in bamboo leaf powder were 4.36, 11.29, 3.37, 7.33, and 65.57%, respectively. The Hunters L, a, and b values decreased significantly as the amount of bamboo leaf powder increased; however, the a and b values increased during storage. The paste property setback values decreased with the malt extract treatment and with increasing amounts of bamboo leaf powder. In a sensory analysis, hard texture strength in the malt extract and bamboo leaf powder treatment groups was less than that in the control during storage. The Jeolpyun prepared with malt extract and no bamboo leaf powder was the most accepted by consumers. Although adding bamboo leaf powder resulted in less consumer acceptance except for the flavor attribute, adding 4% and 8% bamboo leaf powder resulted in better consumer acceptance for texture, taste, and overall acceptance than that of the control. In a microbial analysis, adding bamboo leaf powder resulted in fewer mold colonies. In conclusion, adding 4% bamboo leaf powder and malt extract to Jeolpyun improved its storage properties.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.386-391
• /
• 2014

Silicon nitride ($Si_3N_4$) is regarded as one of the most promising materials for high temperature structural applications due to its excellent mechanical properties at both room and elevated temperatures. However, one high-temperature $Si_3N_4$ material intended for use in radomes has a relatively high dielectric constant of 7.9 - 8.2 at 8 - 10 GHz. In order to reduce the dielectric constant of the $Si_3N_4$, an in-situ reaction process was used to fabricate $Si_3N_4-SiO_2$-BN composites. In the present study, an in-situ reaction between $B_2O_3$ and $Si_3N_4$, with or without addition of BN in the starting powder mixture, was used to form the composite. The in-situ reaction process resulted in the uniform distribution of the constituents making up the composite ceramic, and resulted in good flexural strength and dielectric constant. The composite was produced by pressure-less sintering and hot-pressing at $1650^{\circ}C$ in a nitrogen atmosphere. Microstructure, flexural strength, and dielectric properties of the composites were evaluated with respect to their compositions and sintering processes. The highest flexural strength (193 MPa) and lowest dielectric constant (5.4) was obtained for the hot-pressed composites. The strength of these $Si_3N_4-SiO_2$-BN composites decreased with increasing BN content.