• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.238-244
• /
• 2009

Gymnosporia rothiana (walp) Lawson (celastraceae), commonly known as Maytenus rothiana, is used in Indian folk medicine as an antiulcerogenic agent. However, there have been no scientific reports regarding its antiulcer activity. Therefore, this study was intended to evaluate the antiulcer property of petroleum ether, chloroform, and methanolic extract of leaves of Gymnosporia rothiana at different dose levels in ethanol induced and indomethacin induced gastric ulcer models. It was observed that oral administration of all the extract of Gymnosporia rothiana produces significant reduction in ulcer lesion index as well as increase in volume and pH of gastric content in both experimental models, being petroleum ether extract the most effective at dose of 250 mg/kg; it significantly reduced gastric lesion index (70.06%), in comparison to omeprazole (71.20%) and methanolic extract at a dose of 500 mg/kg (67.22%). Increased gastric mucosal defense mechanism by petroleum ether extract is probably due to its high levels of terpenoids like $\beta$ amyrin, lupeol acetate. The present results clearly shows antiulcer effect of Gymnosporia rothiana against various irritants has been mainly due to cytoprotective effect mediated through prostaglandin and partly due to free radical scavenging activity.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.89-94
• /
• 2005

The purpose of this study is to offer acoustical database of warp knitted fabrics by investigating frictional sound properties and physiological responses according to structural parameters such as construction, lap form, and direction of mutual guide bar movement. Fabric sounds of seven warp knitted fabrics are recorded, and Zwicker's psychoacoustic param­eters - loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) - are calculated. Also, physiological responses evoked by frictional sounds of warp knitted fabrics are measured such as electroencephalogram (EEG), the ratio of high fre­quency to low frequency (HF/LF), respiration rate (RESP), skin conductance level (SCL), and photoplethysmograph (PPG). In case of constructions, frictional sound of sharkskin having higher loudness(Z) and fluctuation strength(Z) increases RESP. By lap form, open lap has louder and larger fluctuating sound than closed lap, but there aren't significant difference of physi­ological responses between open lap and closed lap. In direction of mutual guide bar movement, parallel direction evokes bigger changes of beta wave than counter direction because of its loud, rough, and fluctuating sound. Fluctuation strength(Z) and roughness(Z) are defined as important factors for predicting physiological responses in construction and mutual guide bar movement, respectively.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.183-187
• /
• 2007

적조원격탐사의 기초연구로서 적조생물의 광학적 특성을 조사하였다. 연구에 사용된 적조생물 종은 와편모조류에 속하는 종으로 Scrippsiella trochoidea이다. 광학적 특성 조사를 위해 순수 배양된 생물종을 미세조류은행(KMCC)에서 구입하여 배양하였다. 배양된 샘플로 chlorophyll 농도, 홉광계수(absorption coefficient, a), 소산계수 (attenuation coefficient, c), 역산란계수(backscattering coefficient, $b_b$), 입자크기분포(size distribution, Fd)를 측정하였다. 본 연구의 결과는 2000년 적조 생물종 원격탐사 기술개발 보고서의 결과와 비교해 보았으며, 홉광계수 측정방법에 있어서 filter technique과 부유상태에서 측정한 결과를 비교하였다. 홉광계수에 있어서 기존연구와 본연구의 결과는 매우 유사한 홉광 스펙트럼올 나타내었으며，filter technique와 부유상태에서 측정한 홉광도는 filter technique를 이용한 것이 높은 값을 나타내었다. 이는 multiple absorption, 즉 ${\beta}-effect$에의한 것으로 보인다. 역산란 스펙트럼은 노이즈가 많이 나타났는데 이것은 농도가 충분하지 않아서 나타난 것으로 추정된다. 적조생물의 고유광특성이 해색에 영향을 미칠것이라고 보고 이들 결과는 해색을 재현하기 위한 해색모텔의 입력변수로 활용될 수 있다.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.297-304
• /
• 2005

Naturally occurring flavonoids are known to modulate various inflammatory and immune processes. Based on structural property, in this study, molecular mechanism of flavonoids in modulating nitric oxide (NO) production and its signaling pathway were investigated using lipopolysaccharide (LPS)-activated RAW264.7 cells. Although flavonol-typed flavonoids (kaempferol and quercetin) more potently scavenged reactivity of nitric oxide ($\cdot$NO) as well as peroxynitrite (ONOO$\kappa$) than isoflavones (genistein and genistin), kaempferol, quercetin and genistein showed a little difference in inhibition of both inducible NO synthase expression and NO production, with IC$_{50}$ values of 13.9, 20.1 and 26.8 $\mu$M. However, there was a striking pattern related to structural feature in modulation of LPS-mediated signaling pathways. Thus, flavonols only inhibited transcription factor AP-1 activation, whereas isoflavones suppressed the DNA binding activation of NF-$\kappa$B and C/EBP$\beta$. Therefore, these data suggest that structural feature may be linked to decide drugs target molecule in LPS-mediated signaling pathways, rather than its potency.

• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.28-35
• /
• 2014

Recently, the fuel oil of diesel engines of marine ships has been increasingly changed to heavy oil of low quality as the oil price is getting higher and higher. Therefore, the spiral gear attached at the motor of the oil purifier which plays an important role to purify the heavy oil is also easy to expose at severe environmental condition due to the purification of the heavy oil in higher temperature. Thus, the material of the spiral gear requires a better mechanical strength, wear and corrosion resistance. In this study, the heat treatment(tempering) with various holding time at temperature of $500^{\circ}C$ was carried out to the alloy of Cu-7Al-2.5Si as centrifugal casting, and the properties of both hardness and corrosion resistance with and without heat treatment were investigated with observation of the microstructure and with electrochemical methods, such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and a.c. impedance. in natural seawater solution. The ${\alpha}$, ${\beta}^{\prime}$ and ${\gamma}_2$ phases were observed in the material in spite of no heat treatment due to quenching effect of a spin mold. However, their phases, that is, ${\beta}^{\prime}$ and ${\gamma}_2$ phases decreased gradually with increasing the holding time at a constant temperature of $500^{\circ}C$. The hardness more or less decreased with heat treatment, however its corrosion resistance was improved with the heat treatment. Furthermore, the longer holding time, the better corrosion resistance. In addition, when the holding time was 48hrs, its corrosion current density showed the lowest value. The pattern of corroded surface was nearly similar to that of the pitting corrosion, and this morphology was greatly observed in the case of no heat treatment. It is considered that ${\gamma}_2$ phase at the grain boundary was corroded preferentially as an anode. However, the pattern of general corrosion exhibited increasingly due to decreasing the ${\gamma}_2$ phase with heat treatment. Consequently, it is suggested that the corrosion resistance of Cu-7Al-2.5Si alloy can be improved with the heat treatment as a holding time for 48 hrs at $500^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.439-444
• /
• 1993

The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.

• Journal of Pharmacopuncture
• /
• v.19 no.1
• /
• pp.21-27
• /
• 2016

Objectives: The present study was undertaken to evaluate the immunomodulatory (IM) activity of IM-133N, a herbal combination in various immunotherapeutic experimental models. Methods: The IM activity of IM-133N was evaluated against three experimental models namely, effect of IM-133N against Escherichia coli (E. coli)-induced abdominal sepsis in mice, and carbon clearance test was performed in Wistar albino rats to evaluated the phagocytic potential of IM-133N, in addition IM-133N was evaluated for its immunoglobulin enhancing potential in rats, where the immunoglobulin levels were measured by zinc sulphate turbity (ZST) test. Further, IM-133N was subjected for detailed liquid chromatography-mass spectrometry (LC-MS)/MS analysis to identify the probable active constituents present in it. Results: The findings of the present study has demonstrated very promising IM property of IM-133N in all the experimental models. Briefly, pretreatment with IM-133N at 125, 250, 500 and 1,000 mg/kg, p.o. doses had protected the mice against E. coli-induced abdominal sepsis and mortality, further the effect of IM-133N was found to be significant and dose-dependent. In support of this, in another study administration of IM-133N showed a significant and dose-dependent increase in serum immunoglobulin levels, estimated by ZST test. In line with the above findings, in the carbon clearance test the low doses (125 and 250 mg/kg, p.o.) of IM-133N increased the rate of carbon clearance, whereas the higher doses (500 and 1,000 mg/kg, p.o.) did not sustain the response, and saturation effect was considered as one of the possible reason for futility of higher doses for IM-133N. In addition, A detailed LC-MS/MS analysis of IM-133N showed 17 bioactive phytochemical constituents: namely, apigenin, chaulmoogric acid, mesquitol, quercetin, symphoxanthone, salireposide, ${\beta}$-sitosterol, nonaeicosanol, ${\beta}$-amyrin, betulic acid, oleanolic acid, symplososide, symponoside, symploveroside, symplocomoside, symconoside A and locoracemoside B. Conclusion: These findings suggest that IM-133N possesses significant IM activity and, hence, could be useful for eradicating opportunistic disease-triggering pathogens via immunotherapeutic mechanisms. The findings also suggest IM-133N may also useful in other immunity disorders.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.316-323
• /
• 2012

The aim of this study is to investigate the effect of post heat treatment on bonding properties of roll cladded Ti/MS/Ti materials. First grade Ti sheets and SPCC mild steel sheets were prepared and then Ti/MS/Ti clad materials were fabricated by a cold rolling and post heat treatment process. Microstructure and point analysis of the Ti/MS interfaces were performed using the SEM and EDX Analyser. Diffusion bonding was observed at the interfaces of Ti/MS. The thickness of the diffusion layer increased with post heat treatment temperature and the diffusion layer was verified as having $({\epsilon}+{\zeta})+({\zeta}+{\beta}-Ti)$ intermetallic compounds at $700^{\circ}C$ and an $({\zeta}+{\beta}-Ti)$ intermetallic compound at $800^{\circ}C$, respectively. The micro Knoop hardness of mild steel decreased with post heat treatment temperature; however, those of Ti decreased at a range of $500{\sim}600^{\circ}C$ and showed a uniform value until $800^{\circ}C$ and then increased rapidly up to $900^{\circ}C$. The micro Knoop hardness value of the diffusion layer increased up to $700^{\circ}C$ and then saturated with post heat treatment. A T-type peel test was used to estimate the bonding forces of Ti/Mild steel interfaces. The bonding forces decreased up to $800^{\circ}C$ and then increased slightly with post heat treatment. The optimized temperature ranges for post heat treatment were $500{\sim}600^{\circ}C$ to obtain the proper formability for an additional plastic deformation process.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.228-233
• /
• 2009

This study was conducted to examine the changes in the molecular structure and physiological activities of silk fibroin by gamma irradiation. The results of gel permeation chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the molecular weight of fibroin was increased depending upon the irradiation dose. Secondary structure of fibroin determined by using circular dichroism revealed that the ratio of $\alpha$-helix was increased up to 10 kGy and then decreased depending upon the irradiation dose. Whereas, the ratio of $\beta$-sheet, $\beta$-turn, and random coil were decreased and then increased with an alteration in the $\alpha$-helix secondary conformation. The 2.2-diphenyl-1-picryl-hydrazil (DPPH) radical scavenging activity of fibroin was increased by gamma irradiation at 5 kGy, but was decreased above 10 kGy depending upon the irradiation dose. Also, the inhibition activities of tyrosinase and melanin synthesis of fibroin were increased by gamma irradiation. These results indicated that gamma irradiation could be used as an efficient method to make fibroin more suitable for the development of functional foods and cosmetics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.