• Title/Summary/Keyword: the plate waste

Search Result 191, Processing Time 0.031 seconds

Experimental Study on Liquid Desiccant Distribution Characteristics at a Dehumidifier with Extended Surface (확장표면을 적용한 액체식 제습기에서 제습액 분배 특성에 관한 실험적 연구)

  • Lee, Min-Su;Chang, Young-Soo;Lee, Dae-Young
    • Proceedings of the SAREK Conference
    • /
    • 2009.06a
    • /
    • pp.645-649
    • /
    • 2009
  • Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

  • PDF

Rapid Screening Method of Peroxidase by Colorimetric Assay and Screening of 2, 4-DCP Degradable Strains (발색법에 의한 Peroxidase의 신속한 스크리닝법과 2, 4-DCP 분해균주의 스크리닝)

  • Ryu, Kang;Lee, Eun-Kyu
    • KSBB Journal
    • /
    • v.23 no.6
    • /
    • pp.484-488
    • /
    • 2008
  • Chlorinated phenols are widely used by the chemical industry as intermediate products in synthesis and previously were frequently applied to various industry fields. Peroxidases catalyze the peroxide-dependent oxidation of a range of inorganic and organic compounds. Peroxidase was shown to mineralize a variety of recalcitrant aromatic compounds and to oxidize a number of polycyclic aromatic and phenolic compounds. Among monomeric phenolic and nonphenolic compounds, peroxidase is known to oxidize its compounds. In this study, a colorimetric assay was developed to quantitatively evaluate the peroxidase activity for rapid screening. Color products of different intensity were developed proportionally to the peroxidase activity on agar plate and 96-well plate. This method correlates well with the RP-HPLC result. Using this screening method, 12 colonies of strain was screened which survived at high concentration of 2,4-DCP (1000 ppm) and with peroxidase activity for the $7^{th}$ round screening step on agar plate. These strains were utilized 2,4-DCP as a sole carbon source and produced peroxidase. After the screening test, four of the bacteria have significant better effect of COD removal on dye waste-water. COD removal of these was from 44% to 61%, respectively.

Process and Die Design of Square Cup Drawing for Wall Thickening (사각형 판재성형 시 벽두께 증육을 위한 금형 및 공정 설계)

  • Kim, Jinho;Hong, Seokmoo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.9
    • /
    • pp.5789-5794
    • /
    • 2015
  • Recently, thin and light-weight production technologies are needed in IT industry in accordance with increase of the smart phones and mobile PC products. In order to make light and high rigidity products, engineering plastic and aluminum materials are frequently used in products appearance and frame hat support structure. Especially aluminum extrusion and CNC Brick processes are widely used for high strength and high rigidity technology. But extrusion method has constraints to apply exterior design and CNC Brick process has relatively high production cost and low speed of manufacturing. In this research, a new process method is introduced in order to reduce material cost and to improve manufacturing speed dramatically. Plate forging process means basically that thickening of local wall area thickness after deform exterior shape by deep drawing and bending process. Therefore, it is possible to minimize the waste of material and the manufacturing time. In this study the process of plate forging is designed using finite element program AFDEX-2D and the thickness and the width of initial deformed blank. And it is verified as a sample which is a part of laptop developed through the proposed plate forging method.

A Survey on Menu and Plate Waste of Selected Korean Traditional Restaurants in Daegu Area (대구 지역 한정식 업소의 메뉴 및 고객이 남긴 음식에 대한 조사)

  • 이인숙;최봉순
    • Proceedings of the KSCN Conference
    • /
    • 2003.05a
    • /
    • pp.135-135
    • /
    • 2003
  • 우리의 고유 음식으로 채식과 육식이 조화를 이루고 영양적인 면도 우수한 식단인 한식은 외식산업에서도 점포 종목의 50%를 차지하며, 창업 인기종목이다. 그러나 반찬 수, 가격, 맛 또는 품질의 불균형 등 메뉴와 관련된 내적인 문제점은 과다 점포 경쟁, 소비자의 기호도 변화에 따르지 못함 등의 외적인 문제점과 함께 한식의 경쟁력 약화 요인이 되고 있다. (중략)

  • PDF

Assessment of Nutrient Intakes of Lunch Meals for the Aged Customers at the Elderly Care Facilities Through Measuring Cooking Yield Factor and the Weighed Plate Waste (조리 중량 변화 계수 및 잔반계측법을 이용한 노인복지시설 이용자의 점심식사 영양섭취평가)

  • Chang, Hye-Ja;Yi, Na-Young;Kim, Tae-Hee
    • Journal of Nutrition and Health
    • /
    • v.42 no.7
    • /
    • pp.650-663
    • /
    • 2009
  • The purposes of this study were to investigate one portion size of menus served and to evaluate nutrient intake of lunch at three elderly care facility food services located in Seoul. A weighed plate method was employed to measure plate wastes and consumption of the menus served. Yield factors were calculated from cooking experiments based on standardized recipes, and were used to evaluate nutrient intake. One hundred elderly participated in this study for measuring plate waste and were asked to complete questionnaire. Nutrient analyses for the served and consumed meal were performed using CAN program. The yield factors of rice dishes after cooking are 2.4 regardless of rice dish types, 1.58 for thick soups, 0.60 to 0.70 for meat dishes, and 1.0 to 1.25 branched vegetable. Average consumption quantity of dishes were 235.97 g for rice, 248.53 g for soup, 72.83 g for meat dishes, 39.80 g for vegetables and 28.36 g for Kimchi. On average the food waste rate is 14.0%, indicating the second highest plate waste percentage of Kimchi (26.2%), and meat/fish dish (17.3%). The evaluation results of NAR (Nutrition Adequacy Ratio) showed that iron (0.12), calcium (0.64), riboflavin (0.80), and folic acid (0.97) were less than 1.0 in both male and female elderly groups, indicating significant differences of NAR among three facilities. Compared to the 1/3 Dietary Reference Intake (DRIs) for the elderly groups, nutrient intake analysis demonstrated that calcium (100%) and iron (100%), followed by riboflavin, vitamin A, and Vitamin B6 did not met of the 1/3 EAR (Estimated Average Requirement). For the nutritious meal management, a professional dietitian should be placed at the elderly care center to develop standardized recipes in consideration of yield factors and the elderly's health and nutrition status.

Bearing Capacity and Settlement of Reclaimed Land by Utilizing Waste Lime (폐석회를 활용한 성토매립지반의 지지력 및 침하특성에 관한 연구)

  • 신은철;오영인
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.4
    • /
    • pp.175-184
    • /
    • 1999
  • Several major land reclamation projects such as the Inchon International Airport construction, Songdo New City construction, LNG Tank and LPG storage construction are underway along the coastal line of Inchon in Korea. This study was carried out to investigate the feasible use of waste lime in the land reclamation projects. Waste lime (hydrated lime) used in this study is produced as a by-product in the manufacturing process of $Na_2CO_3$ from local chemical factory in Inchon. This study presents the characteristics of bearing capacity and settlement on the ground formed by layers of waste lime and dredged soil. From the laboratory and in-situ plate load test, the ultimate bearing capacity by in-situ test was 1.25~1.37 times higher than that of the theoretical ultimate bearing capacity. Based on the settlement analysis by Magset- II, the total settlement of layered ground steadly increased up to the ratio of waste lime depth 0.2 and therefore rapidly increased with the increase of waste lime depth. The results of the present study indicate that the ratio of waste lime depth for reclamation work is about 0.2.

  • PDF

Quality Characteristics of Chungkukjang-Kimchi and Its Acceptability by Elementary School Students (청국장김치의 품질 특성 및 초등학교 급식에서의 수응도 평가)

  • Yang, Eun-Sun;Yang, Hyang-Sook;Kim, Ae-Jung;Rho, Jeong-Ok
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.18 no.4
    • /
    • pp.507-515
    • /
    • 2008
  • This study investigated the standard recipe and changes in the quality characteristics of Chungkukjang-Kimchi (CKK) and evaluated its acceptance by elementary school students. The acceptability of Kimchi among elementary school students was evaluated by monitoring the plate waste rate. Chungkukjang powder was added to the Kimchi recipe at 0, 20, 40, 60% of the total weight of red pepper powder. The pH of the CKK decreased as fermentation proceeded, and the total acidity was $0.24{\sim}0.25%$ in all samples. The salinity of the CKK was 2.32%. The L color value was significantly lower in the treatment groups than in the control group. The b and a color values increased in the beginning, but tended to decrease during fermentation. In the sensory evaluation, there was no significant difference in appearance on preparation day, but there were significant differences on the 6th (p<0.05) and 20th days (p<0.01), with the highest scores observed in the 40% added group. Sourness increased significantly (p<0.001) during fermentation in all samples. There were significant differences (p<0.001) in crispness on the 3rd day among the treatment groups, and it tended to decrease as fermentation progressed. There were significant differences in flavor during the early stage (p<0.001), but there were no differences as fermentation proceeded. Overall acceptability was high in the 40% added group. Evaluation of acceptability by monitoring the plate waste rate in the school dining room showed that acceptability was highest in the 20% added group. Thus, it was concluded that acceptability among elementary school students was highest for CKK from the 20% Chungkukjang group.

  • PDF

Relationship between Breakfast Frequency and School Food Waste among High School Students in Daegu (아침식사와 학교급식 잔반량과의 연관성 연구: 대구지역 고등학생을 대상으로)

  • Cha, Myeong-Hwa;Kim, Yoo-Kyeong
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.36 no.4
    • /
    • pp.481-487
    • /
    • 2007
  • The purposes of this study were to examine the influence of breakfast consumption frequency on school food waste and to compare its effect with food service satisfaction and food service management type. The subjects who participated in this study were composed of 978 first grade high school students from 30 high schools in Daegu. The hierarchical multiple regression analysis was carried out for the data analysis using SPSS 12.0 program. School food waste was estimated by visual evaluation method. The questionnaires containing breakfast eating frequency, food service satisfaction, and food service management type were surveyed. According to the results, school food waste was significantly affected by breakfast eating frequency. In contrast, food service satisfaction had a negative effect on school food waste, which was more significantly apparent in less frequent breakfast. Although the amount of lunch waste was influenced by food service satisfaction related with menu, it was not significantly affected by food service management type and food service satisfaction related with hygiene and service. In conclusion, the results indicate that eating breakfast is estimated as a characteristic strategy for improving efficiency of school food service by curtailing food waste. This study suggested that the importance of eating breakfast could be incorporated into the subjects of continuous nutritional education and the strategic planning for promoting efficiency of school food service.

Comparative Study of the Effects of Conventional Cooking and Oven Cooking on the Acceptability of the School Lunch Menu (오븐조리 및 전통조리 방법을 활용한 급식 메뉴의 기호도 비교 연구)

  • Ahn, Hee-Jun;Kim, Hee-Sup
    • Journal of the Korean Society of Food Culture
    • /
    • v.24 no.5
    • /
    • pp.533-539
    • /
    • 2009
  • Frying is the most popular cooking style used in food service institutions in Korea because fried dishes are well accepted by students. However, trans fat contents reduction have recently been required in many foods for health reasons Therefore, alternatives to frying such as oven baking or roasting are being used in many institutions. Steam convection ovens provide dry heat as well as steam so that they can be used to make a wide variety of Korean dishes. In this study, a menu acceptance test was conducted over 2 weeks. Pork, chicken, fish and potato dishes cooked by conventional cooking methods were served for 4 successive days, after which the same dishes were prepared using the oven. Overall, 322 junior high school students evaluated the traditionally cooked foods, while 316 evaluated the oven cooked foods. Comparison of the foods prepared using both methods only revealed a significant difference in the acceptability of foods on the fish menu (p<0.05). Specifically, the acceptance of fried fish was higher than that of the oven baked fish. Additionally, overall acceptance of the menu by males was higher than the acceptance by girls. Furthermore, students who had the preference for special ingredients showed a higher menu acceptance for the menu cooked with those ingredients. On average, approximately 25% of the meal was not consumed and left as plate waste. The portion of the fried fish not consumed was smaller than that of the oven cooked fish, but the portion not consumed did not vary based on cooking method for any other foods evaluated. Overall, it is expected that the oven cooking method will be a good substitute for frying or other cooking method for traditional Korean dishes.

The Effectiveness of Nutrition Education Provided by Dietitians in Child Care Centers (보육시설의 영양사 배치를 통한 영양교육 및 효과 평가)

  • Chang, Hye-Ja;Ko, Eun-Seon
    • Korean Journal of Community Nutrition
    • /
    • v.12 no.3
    • /
    • pp.299-309
    • /
    • 2007
  • The purpose of this study was to evaluate the effectiveness of nutrition education with nutrition services provided by dietitians who were placed in child care facilities from the Korean Dietetic Association. For this, we investigated the levels of nutrition knowledge and dietary intakes of children who attended child-care centers as well as dietary practices of children assessed by their parents. The treatment for children consisted of nutrition education and food service activities that are provided by the dietitian who have 3 to 5 years experience. Nutrition education was implemented during 10 weeks, 20 times, and a total 400 min and it's effectiveness was evaluated by questionnaire. Data were obtained for 123 children aged 4 to 5 years old who attended four child-care centers, one for a control group and 3 for intervention groups. Dietary intakes were investigated by measuring one-serving size and plate waste a of child for one-day dietary records before and after nutrition education. The levels of nutrition knowledge of children improved showing 70.80 points before to 83.45 points after nutrition education (p<0.001). Dietary intakes of the children after nutrition service increased significantly on cooked rice (133.66 g), Kimchi (19.41 g), side dish of meat/fish (48.40 g), and side dish of vegetables (24.88 g). Dietary practices of children after treatment also improved especially 'eat diverse meat, fish, egg, and bean' and 'never leave plate waste'. To summarize, this study pointed out that nutrition service and nutrition education provided by dietitians had influences on increases of the nutrition knowledge, dietary intake, and dietary practices. Therefore, placement of dietitians needs to extend to child care facilities from the 100 persons-over-capacity facility to the 50 persons-over-capacity facility, for providing professional service such as nutrition education and nutrition counseling.