• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.235-241
• /
• 2016

The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties. The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.231-236
• /
• 2014

This experiment was carried out to establish the optimum cutting time, plant growth regulator, and bed-soil for rooting by greenwood cutting of Schisandra chinensis. Approximately 7 cm long-shoots of greenwood cuttings were transplanted by various cutting times, plant growth regulators, and bed-soils in the plastic-film house. The rooting rate of greenwood cutting was 12.5% in the April 5th, 73.5% in the May 8th, and 75.5% in the August 5th. The number and length of primary root in greenwood cutting were more in the early May than those in the early August. For mass propagation of Schisandra chinensis. using greenwood cutting, shoots were treated with plant growth regulators on May to increase rooting rate. Rooting rate was 100% with IAA $50mg/{\ell}$, 92.9% with NAA $100mg/{\ell}$, and NAA $1,000mg/{\ell}$, for 60 min. To select effective media for rooting, various medias for bed-soil were treated by single and mixture form for 100 days after cutting. Rooting rate was 91.8% in the single treatment of peat moss or decomposition of granite soil, and this result was better than those in other treatment. The treatment by 1 : 1 mixture of peat moss and horticulture bed soil was rooting with 94.0% best rooting rate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.12-19
• /
• 2008

This study was conducted to investigate the draft data for the habitat environment and massive propagation method of Miscanthus changii, which is classified as rare species. The in-site analysis of the native soil give a indication of pH 5.24~5.48, electric conductivity (EC)0.03~0.02 $dS{\cdot}m^{-1}$, organic matter (OM) 1.13~1.15%, Ca 3.4 $mg{\cdot}kg^{-1}$, K 0.25 $mg{\cdot}kg^{-1}$, Mg 0.53 $mg{\cdot}kg^{-1}$, N 0.23%, P 2.15 $mg{\cdot}kg^{-1}$ showed low and 0.33~9.12 $cmol{\cdot}kg^{-1}$ CEC. Growth and tiller number in rhizome propagation of Miscanthus changii showed that horticulture media (perlite 1+vermiculate 1+peat moss 1) is the most suitable soil to habitat. As for seed propagation, germination percentage is 0% (0/20) at first seeding, 2% (1/50) at second seeding and 2.1% (6/280) at third seeding. The average germination percentage was below 2%. This is the reason why Miscanthus changi disappear at habitat of poor soil environment and low germination. We gained 61 plants that 60 rhizome propagation and 1 by seed propagation, renatural to habitat.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.269-280
• /
• 1997

Collated data from the 1995-1996 field surveys of weed seeds buried in the plough layer of peat soil in Selangor district were analysed to assess species-dominance and spatial pattern of distribution of weed seeds based on selected quantitative indices and index of dispersion. Forty five species within 14 families were recorded of which 24 were broadleaves, 12 grasses and 9 sedges. They comprised ca. 53.2, 31.2 and 15.6%, respectively based on total population counts. Total seed population was ca. $8.14{\times}10^7$ seeds/ha within the fast 25cm soil depth. Wide variabilities in population counts were registered among species ranging from < $7.0{\times}10^4$ seeds/ha for Amaranthus gracilis to ca. $5.64{\times}10^6$ seeds/ha for Heteropogon contortus. Seeds of Cleome rutidesperma was the most abundant(ca. $2.347{\times}10^7$ seeds/ha). Difference in seed population counts may be attributed to inherent variation in fecundity, population fluxes, their spatial distribution patterns and the agronomic practices prevailing in the areas of survey. The profile distribution of soil seed banks was skewed within the first 0 - 10cm depth, comprising ca. 69% of the total seed counts. Seed counts in the 10 - 15, 15 - 20 and 20 - 25cm soil profiles were in the order of 17.9, 8.6 and 4.0% of the total populations, respectively. Weed seeds of all species displayed different degree of aggregated pattern of distribution with variance-to-mean ratios of > 1 and Lloyd's mean crowding($m^*$) values from 1.244 for Cyperus iria, Phyllanthus debilis, Phyllanthus urinaria, Scirpus grosses and urinaria lagopodiodes to 9607.7 for Cleome rutidosperma. Lloyd's patch indices(Ip) ranging from 5.1 for Aeschynomene indica to 188.5 for Bracharia reptans were registered. Differences in the VMR, $m^*$ and Ip values among species suggested inter-alia inherent variabilities in their disposal capacity from seed source and different agronomic practices prevailing in the areas surveyed.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.6
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.344-351
• /
• 2002

Chemical speciation and transport of heavy metals in soil environment could be controlled by humic acid. In order to understand the mechanism on competitive adsorption of Cd and Cu on the surface of humic acid extracted from peat, the charge development of humic acid were investigate through a batch adsorption experiment with a series of different background electrolytes levels. The competitive adsorption of Cd and Cu to the humic acid were estimated according to the model using the proton binding constant obtained from the above batch test. The affinity of Cu to the carboxyl group on the humic acid was higher than that of Cd, but the affinity to the phenolic group was lower than to the carboxyl group. It seems that the amount of adsorbed Cd and Cu could be estimated using the proton binding constant obtained from a solution with single background ion. However, it is difficult to interpret the competitive adsorption of Cd and Cu with the constant for single background ion.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.199-207
• /
• 2024

We conducted to investigate both plant growth-promoting and plant disease-controlling activities of bacterial strains isolated from soil. Among the 48 isolated strains, SH-23, SH-26, SH-29, and SH-33 were identified as excellent strains for the production of β-glucosidase, cellulase, amylase, and protease. These 4 strains exhibited antifungal activity against plant pathogenic fungi (Botrytis cinerea, Rhizoctonia solani, Fusarium oxysporum, Colletotrichum acutatum). Strain SH-26, which exhibited excellent organic matter decomposition and antifungal activity against plant pathogenic fungi, was selected as the final superior strain. Upon determining the 16S rRNA gene sequence of the selected SH-26 strain, it exhibited 100% similarity with Pseudomonas knackmussii HG322950 B13^T, Pseudomonas citronellolis BCZY01000096 NBRC 103043^T, and Pseudomonas delhiensis jgi.1118306 RLD-1^T. Furthermore, it was confirmed that the Pseudomonas sp. SH-26 exhibited siderophore production, nitrogen fixation ability, and the production of Indole-3-acetic acid.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.231-238
• /
• 2021

BACKGROUND: Metal contamination of farmlands nearby abandoned mines is a serious environmental problem. This study was conducted to evaluate the efficiency of stabilizers on different type of the soils contaminated with metals. METHODS AND RESULTS: The texture of silt loam soil initially contaminated with heavy metal was artificially adjusted to loam and sandy loam by adding sand, and the soil organic matter content (1.5%) was also altered by adding peat to the soils at 3.5 and 8.0%. The soils were mixed with 3% (w/w) of each limestone, dolomite, and steel slag. For the soils with different textures, the bioavailability of As was found to be the lowest in sandy loam compared to others metals such as Cu, Pb, and Zn. The efficacy of limestone and dolomite was not significantly different compared to the soils having different organic matter contents, but the stabilization efficiency of steel slag increased as the soil organic matter content increased. Moreover, stabilizers showed inhibition effect on the uptake of metals to plant. CONCLUSION: The stabilizers were found as effective materials to immobilize metals in soil and to decrease plant uptake of metals. Studies are needed to deeply elucidate the interaction between influencing factors and various stabilizers.

• Horticultural Science & Technology
• /
• v.18 no.4
• /
• pp.529-535
• /
• 2000

Organic materials such as composted rice-hull, saw dust, and pine bark, and inorganic materials such as vermiculite, perlite, and recycled rockwool were commonly employed as container media in domestic greenhouse industry. The objective of this research was to get informations in soil physico chemical properties of those materials. Composted dry-peeling bark and wet-peeling bark had 72.1% and 69.1%, respectively, in particles larger than 1.0 mm, which were much higher than 34.7% of composted rice-hull and 33.7% of composted saw dust. Imported vermiculite had 89.9%, but domestic vermiculite had 25.7% in particles larger than 1 mm. In soil physical properties, Russian peat had the highest container capacity of 79.3%, and wet-peeling bark had the lowest container capacity of 58.2%. However, Russian peat and composted saw-dust had 4.1% in air space indicating that possible problems could occur in soil aeration when those are employed for container grown crops. Saw dust had $2.3mS{\cdot}cm^{-1}$ in electrical conductivity, while other composted organic materials had less than $0.25mS{\cdot}cm^{-1}$. Imported vermiculite had 64.0 meq/100 g in cation exchange capacity, which was 2.4 times higher than those of domestic vermiculite, 27.2 meq/100 g. Domestic vermiculite had higher Ca and Mg and less Na contents than those of imported vermiculite.

• Journal of Plant Biotechnology
• /
• v.49 no.2
• /
• pp.124-130
• /
• 2022

The application of traditional taro propagation methods for large-scale cultivation would be insufficient to meet the high demand for quality planting materials. Therefore, this study aimed to develop an in vitro micro-propagation technique for two local taro cultivars (cv.), Wangi and Putih. Taro cormels were collected from the Malaysian Agricultural Research and Development Institute (MARDI) germplasm (Serdang, Malaysia). Explants were taken from the shoot tip of cormels and initially cultured on Murashige and Skoog (MS) basal media for four weeks. The explants were then transferred to different multiplication media supplemented with different types and concentrations of cytokinins such as 6-benzylaminopurine (BAP ) and Thidiazuron (TDZ). Shoot production was quantified after six weeks of culture. The highest mean number of new shoots was produced by the Wangi cultivar on MS medium supplemented with 2.0 mg/l BAP (2.10 shoots), MS medium supplemented with 0.5 mg/l TDZ (2.18 shoots), and Gamborg B5 medium supplemented with 6.0 mg/l BAP (2.43 shoots). The maximum average number of the Putih cultivar shoots was obtained on MS supplemented with 2.0 mg/l BAP (3.57 shoots). MS basal media was used for root initiation, as it produced an average of 25 roots with an 11-cm length. Various types of substrate mixtures were used during acclimatization. The best acclimatization substrate for the Wangi cultivar was 100% peat soil, whereas the Putih cultivar grew optimally in a combination of peat and perlites at a 1:1 ratio. Taro plantlets require approximately 4 to 6 weeks to acclimatize before they can be transferred to the field.