• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.114-115
• /
• 2018

Since the introduction of the C.M(Construction Management)system in the Basic Law of the Construction Industry in 1997, the recent arrangement of construction management engineers in public sector buildings has generally been based on architecture·civilengineering·machinery·landscaping, electricity, telecommunication, fire fighting by the number of M/M(Man and Month). In the field of engineers arrangement in each field, the arrangement of M/M according to the workload of architecture.civilengineering.machinery.landscaping and electricity is inadequate causing conflicts and C.M among construction management engineers. Therefore, this study aims at basic research that is used to identify the problems through the questionnaire and to prepare future improvement plans.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.12-22
• /
• 2024

Software applications have a huge and inseparable impact on our lives. The complexity of the applications increases rapidly to support high performance and multifunction. Accordingly, the cost model for applications is increasingly important. Line of Code (LOC) and Man-Month (M/M) as the cost model measure the quantitative sides of the applications. Unlike them, Function Point (FP) measures the functionalities of the application. FP is efficient for estimating qualitative characteristics, but it is restricted to measuring the cost of an application using the wireless data broadcast which can support any number of clients. In this paper, we propose, a Function Point model for Information services using wireles data Broadcast (FPIB) to measure the development cost of an application that serves using the wireless data broadcast environment. FPIB adopts critical parameters of the wireless broadcast environment and the complexity of them to measure effectively the cost developing the application. Through the evaluation comparing the proposed FPIB with FP, we reveal the effectiveness of the proposed FPIB.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.127-135
• /
• 2003

The primary contributors to the total occupational radiation exposure in operating nuclear power plants are operation and maintenance activities doting refueling outages. The Advanced Power Reactor 1400 (APR1400) includes a number of design improvements and plans to utilize advanced maintenance methods and robotics to minimize the annual collective dose. The major radiation exposure reduction features implemented in APR1400 are a permanent refueling pool seal, quick opening transfer tube blind flange, improved hydrogen peroxide injection at shutdown, improved permanent steam generator work platforms, and more effective temporary shielding. The estimated average annual occupational radiation exposure for APR1400 based on the reference plant experience and an engineering judgment is determined to be in the order of 0.4 man-Sv, which is well within the design goal of 1 man-Sv. The basis of this average annual occupational radiation exposure estimation is an eighteen (18) month fuel cycle with maintenance performed to steam generators and reactor coolant pumps during refueling outage. The outage duration is assumed to be 28 days. The outage work is to be performed on a 24 hour per day basis, seven (7) days a week with overlapping twelve (12) hour work shifts. The occupational radiation exposure for APR1400 is also determined by an alternate method which consists of estimating radiation exposures expected for the major activities during the refueling outage. The major outage activities that cause the majority of the total radiation exposure during refueling outage such as fuel handling, reactor coolant pump maintenance, steam generator inspection and maintenance, reactor vessel head area maintenance, decontamination, and ICI & instrumentation maintenance activities are evaluated at a task level. The calculated value using this method is in close agreement with the value of 0.4 man-Sv, that has been determined based on the experience aid engineering judgement. Therefore, with the As Low As Reasonably Achievable (ALARA) advanced design features incorporated in the design, APR1400 design is to meet its design goal with sufficient margin, that is, more than a factor of two (2), if operated on art eighteen (18) month fuel cycle.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.117-122
• /
• 2007

This study was investigated the potential of ducks and fish trap for the control of golden apple snail, Pomacea canaliculata, in paddy field and water canals. The smaller size of duck (700g) preyed snails than the bigger one (1,300g). The consumption of two ducks was bigger under plastic house. They preyed over 90% on the second days of release. The release time of ducks was more effective at seven days after inoculation of snails than simultaneous. Duck could suppress the density of snails at any time from month after inoculation. Four ducks per $30m^2$ could control snails in an irrigation canals. The number of attracted golden apple snail per week was 216 in big fish trap $({\Phi}15cm)$ with menthol paste which for a carp.

• Journal of Sericultural and Entomological Science
• /
• v.10
• /
• pp.99-105
• /
• 1969

The results of investigation and management analysis for the silk filatures in Korea until 1968 are evaluated as followings. (1) The average cocoon purchasing amount for a filature was found as 10,800kg and they are processed 105kg per man on the cocoon assorting process, 8,683kg per day during the drying process of which 42 percent are dried with low temperature drying system. (2) The average cocoon cooking capacity is 50 g, cocoon per minute, but the cooking capacity per man is smaller in case of larger factory. (3) The silk production capacity per month per a filature is 6,000kg and the amount gets smaller in case of larger factory. (4) The employee cost per one kg of raw silk production was found as high in smaller factory and it was found that 200~300 sets size was the optimum capacity for operation. (5) In case of multiends silk reeling machine, the employee cost for the silk reeling process acts as the most peculier factor among six different cocoon processes and it is reached to conclued to deduct the number of employees for this process in order to deduct the production cost. (6) The correlation coefficients between cost factors and total labour cost was found as 46 percent, therefore the rest (54％) will be the production cost other than labour cost.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.216-223
• /
• 2010

In previous research, results on efficiency versus size and type of Ag particles showed similarity of detection efficiency comparing the particles of flake and spherical type with the gray particle on the market and in the case of nAg (rod, $0.9\;{\mu}m$) particle, relatively good results was given in the various evaluation methods for detection efficiency of latent fingerprint. However, oxidation was occurred when nAg particles laying on nature condition for a month and due to water absorption, detection efficiency was decreased. Therefore, with need to prevent oxidation and water absorption, more research is necessary. In this research, surface modification on nAg particles using silicon oil was conducted in various methods for complementing weakness of oxidation and water absorption. Then detection efficiency of nAg particles and surface modified nAg particles was evaluated by the number of feature points on the surface of non-porous materials (glass, plastic etc.) and degree of particle adhesion with ridges and contrast of detected fingerprint. Improvement of preventing oxidation and water absorbtion was given by surface modification using silicon oil (DC200, 0.5%) on the surface of non-porous materials.