• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.480-489
• /
• 2016

A novel hybrid carrier-based pulse width modulation (CBPWM) scheme that combines unipolar and dipolar modulations is proposed for single-phase three-level rectifiers, which are widely applied in railway traction drive systems. The proposed CBPWM method can satisfy the volt-second balancing principle in the complete modulation index region through overmodulation compensation. The modulation scheme features two modulation modes: unipolar and dipolar. The operation range limits of these modulation modes can be modified by changing the separation coefficient. In comparison with the traditional unipolar CBPWM, the proposed hybrid CBPWM scheme can provide advantageous features, such as lower high-order harmonic distortion of the line current and better utilization of switching frequency. The separation coefficient value is optimized to achieve the maximum utilization of these advantages. The experimental results verify the feasibility and effectiveness of the proposed hybrid CBPWM scheme.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.940-953
• /
• 2006

The major source of carbon monoxide (CO) at the Earth's surface is the incomplete combustion of biomass and fossil fuels. Because the global lifetime of CO is about two months, it can be used as a tracer for pollution from anthropogenic activities and biomass hurtling. In this paper, we introduced the principle and algorithm of the Measurement of Pollution in the Troposphere (MOPITT) instrument for global CO monitoring. The MOPITT instrument, which was launched on the Satellite Terra in 1999, measures CO column and mixing ratio based on gas correlation radiometry. CO levels can be determined by a retrieval algorithm based on the maximum likelihood method minimizing the difference between observed and modeled radiances. MOPITT level 2 data (HDF format) can be downloaded through the Earth Observing System (EOS) data gateway of NASA. ASCII files of CO parameters can be extracted from HDF files, and then temporal and spatial distributions can be obtained. Finally, we showed an example of CO monitoring in April 2000. The locations of forest fires and distribution of MOPITT CO clearly indicated that not only anthropogenic emissions but also forest fires play an important role in CO levels and global CO distribution. Our introduction to MOPITT and the example of MOPITT data interpretation would be helpful for scientists who want to use the EOS data.

• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.633-656
• /
• 2022

Many regions of the world are now facing the second wave of boomed cases of COVID-19. This time, the second wave of this highly infectious disease (COVID-19) is becoming more devastating. To control the existing situation, more mass testing, and tracing of COVID-19 positive individuals are required. Furthermore, practicing to wear a face mask and maintenance of physical distancing are strongly recommended for everyone. Taking all these into consideration, an optimal control problem has been reformulated in terms of nonlinear ordinary differential equations in this paper. The aim of this study is to explore the control strategy of coronavirus-2 disease (COVID-19) and thus, minimize the number of symptomatic, asymptomatic and infected individuals as well as cost of the controls measures. The optimal control model has been analyzed analytically with the help of the necessary conditions of very well-known Pontryagin's maximum principle. Numerical simulations of the optimal control problem are also performed to illustrate the results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.478-487
• /
• 1991

In this study, dynamic stability of discontinuous free Timoshenko beam, barring a concentrated mass, under constant follower force is considered. Governing differential equations are derived based on the extended Hamilton's principle and finite element method is applied for numerical analysis. Conclusions of the study are as follows : (1) Without force direction control, (i) the critical follower force at instability is increased with concentrated mass regardless of discontinuity. (ii) the minimum critical follower force is located in the vicinity of discontinuity position .xi.$_{d}$=0.75. (iii) at mass location .mu. .leq.0.5 the force at instability is decreased as magnitude of concentrated mass is increased but, at .mu. .geq. 0.5 the force is increased as the mass is increased. (2) With force direction control, (i) shear deformation parameter S contributes insignificantly to the force at instability when S>10$^{[-993]}$ (ii) maximum critical follower force can be obtained for the discontinuity location .xi.$_{d}$=0.25. (iii) the critical follower force is increased as magnitude of concentrated mass .alpha. is increased at mass location .mu. .geq.0.4, but is increased, .mu ..leq.0.4.4.

• Journal of architectural history
• /
• v.7 no.4 s.17
• /
• pp.77-91
• /
• 1998

The theory of tectonic appeared in the midst of 19th century as German architects adopted new materials and structural technology, invented by creative engineers, into architectural design. This does not merely mean a technical problem but concern the redefinition of architecture in term of an aesthetic, cultural, and ontological identity. Furthermore it alluded to a desire on the part of architectural theorists to actualize artistic and spiritual goals out of new constructional necessities. Because of their complex discourse that assumed the possibility of communication between philosophical and technical aspects, between ideal and real concerns, tectonics becomes until now the most important issue in architecture. The concept of tectonic was intensively investigated by Gottfried Semper's and Karl B$\ddot{o}$tticher architectural writings. They contributed to clarify the principle aspects of tectonic within architectural, philosophical, and anthropological discourses of 19th century. Gottfried Semper stressed an understanding of how architecture took on physical form in earliest human culture. He placed great importance on the artistic expression of materials. But unlike Semper who argued the cladding of the structural frame by decorative wall system, Karl Botticher required maximum visibility of structural frame. This represents the different positions between Gottfried Semper and Karl Botticher

• Journal of Arbitration Studies
• /
• v.21 no.1
• /
• pp.131-155
• /
• 2011

PICC executes its role as a useful lex mercatoria in the continuously increasing international trade to be adopted as the standard criterion of prevention or dispute resolution. When considering the fact that GISG has not presented results beyond expectation in the past due to hard laws and legal deficiency, PICC, which possesses interpretation and supplementation function, is considered undoubtedly useful particularly in international commercial arbitration. As observed in the previously mentioned analysis on cases accumulated in UNILEX, PICC application and Arbitral tribunal in international contract between parties possess considerably large claim possibility and the number of actual application cases is continuously increasing. The fact that PICC has been composed as maximum common measures of continental and common law systems by traditional comparative legal scholars familiar with international trade can function as the fundamental principle in future global trade activity and can also act as the model law for uniting contract laws of nations. In this aspect, PICC can be evaluated to have considerably achieved enactment purpose of previous intention. However, additional topics that had not been accepted in the revised edition of PICC remain as assignments requiring solution, such as analysis and acceptance problem of comparative law, PR of PICC unfamiliar even to the relative parties of international trade and application in international contract, and absorption problem as model law in various domestic laws.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.3
• /
• pp.33-40
• /
• 2019

Woolyang(月梁) is a beam which whole shape is curved like a so-called moon(月). According to the ${\ll}$Yeongjobeosig(營造法式)${\gg}$, In the case of beams installed under the ceiling of a wooden building, it is used by manufacturing them in Woolyang(月梁) for maximum visual decorative effects as the shape is exposed. In order to achieve the end of a beam that is manufacturing in Woolyang(月梁), it is important to process it in a suitable size and shape for a given situation to achieve a combination with other members around it. However, in the "營造法式", the standard of production of the Woolyang(月梁) is divided into Myeongbog(明?), Chagyeon(箚牽), Pyeonglyang(平梁), and the height of each beam head is divided into 21分$^{\circ}$, 15分$^{\circ}$, 25分$^{\circ}$, but it is not possible to look at any more specific reference. In this paper, try to consider the principle of Woolyang(月梁) manufacturing and its normative contents which were indirectly proposed in the ${\ll}$Yeongjobeosig(營造法式)${\gg}$.

• Child Health Nursing Research
• /
• v.13 no.1
• /
• pp.13-20
• /
• 2007

Purpose: This investigation examined a model to predict body mass index in order to prevent later development of obesity among adolescents. The hypothesized model was developed based on the principle of Social Cognitive Theory that social influences predict perceptions of cognition as well as behavior. Method: The 5,770 adolescents, aged 14-18 who participated in this study came from 11 separate school districts in Busan and Kyungnam province of South Korea. The adolescent surveys were administered in a group setting at the participating school. Of the 5770 surveys, adolescents with more than 10 percent missing data in the entire survey were excluded. The final sample contained 4,527 cases. The adolescents were included 2,250 (49.7%) males and 2,277 (50.3%) females. Data was analyzed Pearson correlation coefficients using SPSS 12 program and structural equation model (SEM) using Maximum Likelihood estimation was employed using Amos 5.0. Results: Social support directly affects cognitive determinants. Cognitive determinants directly affect behavior determinants which directly affect BMI. Cognitive and behavioral factors mediated the relationship between social support and BMI (GFI= 0.984, CFI= 0.974, RMSEA=0.031). Conclusion: Social levels should be supportive to help adolescents have healthier behaviors. This support can be accomplished by providing frequent support to establish positive cognitive factors as the foundation of the solution to prevent overweight and obesity.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.565-572
• /
• 2001

Analyzing functions with small values of the product of position and frequency uncertainties have many advantages in image processing and data compression. Until now, this values has been computed based on the uncertainty principle, but the computed frequency uncertainty is not practical the human visual filters which have on-zero peak response frequencies. A new metric for the frequency uncertainty is used to calculate a deviation about the frequency which has maximum response. The joint effective widths for various functions are derived. As the result of analysis, the joint uncertainty for many functions converges to 0.5 as the joint parameter increases. Furthermore. Gabor cosine function shows an excellent performance among the mentioned functions.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.311-317
• /
• 2011

The present paper deals with the continuous works of extending the multi-dimensional limiting process (MLP) for compressible flows, which has been quite successful in finite volume methods, into discontinuous Galerkin (DG) methods. From the series of the previous, it was observed that the MLP shows several superior characteristics, such as an efficient controlling of multi-dimensional oscillations and accurate capturing of both discontinuous and continuous flow features. Mathematically, fundamental mechanism of oscillation-control in multiple dimensions has been established by satisfaction of the maximum principle. The MLP limiting strategy is extended into DG framework, which takes advantage of higher-order reconstruction within compact stencil, to capture detailed flow structures very accurately. At the present, it is observed that the proposed approach yields outstanding performances in resolving non-compressive as well as compressive flaw features. In the presentation, further numerical analyses and results are going to be presented to validate that the newly developed DG-MLP methods provide quite desirable performances in controlling numerical oscillations as well as capturing key flow features.