• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.5-15
• /
• 2008

본 연구의 목적은 연약지반개량을 위한 수평배수층 재료로 순환골재의 적용가능성을 검증함에 있다. 최근 모래의 수급불균형이 초래되고 있으며, 이는 단순히 가격 상승의 문제에서 그치는 것이 아닌 전체 공정의 지연을 초래하게되어 문제의 심각성이 크다. 이러한 상황에서 순환골재는 그 수요를 충족시킬 수 있는 적절한 대체재료로 인식되고 있으며, 이를 검증하기 위해 우선 이미 제정된 각종기준과 규정을 찾아 비교 정리하였고, 다음으로 기존의 수평배수층 재료인 모래와의 공학적 특성에 대한 비교 및 검토를 시행하였다. 결과로써 순환골재는 모래에 비해 큰 투수계수 및 단위중량으로 인해 수평배수층으로써의 대부분 기준을 만족하였으며, 클로깅에 대한 문제는 수평배수층 상부에 필터층을 추가 설치하는 방안으로 해결할 수 있어, 현장적용이 가능한 것으로 판단되었다. 또한 모래에 비해 순환골재의 구입단가가 상대적으로 낮아 공사비 절감이 가능하여, 수평배수층 재료로 순환골재는 매우 경쟁력있는 대체재료라 할 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.703-710
• /
• 2002

In the design of cut and cover tunnels, the structural analysis has been used for its simplicity. Contrarily to the geotechnical analysis, this technique could not account for the geological and geometric factors. In this study, the dominant factors influencing the behavior of cut and cover tunnel such as interface element, cut slope, distance between cut slope and tunnel lining, berm, coefficient of lateral earth pressure, were investigated and compared by geotechnical numerical analysis. Based on the results, the variations of earth pressure, bending moment, shear stress, axial load, and displacements were evaluated and analyzed for each factor.

• 한국농공학회지
• /
• 제38권1호
• /
• pp.116-127
• /
• 1996

This paper dealt with FEM analysis of foundation improved with pack drain. The theory on pack drain was scrutinized and observed values in the field were compared with numerical results. Work site of Kwangyang container pier was selected as a ease study in which measurement of settlement and pore water pressure was accurately carried out. Biot's consolidation equation was selected as governing One, coupled with modified Camclay model as constitutive one. Christian and Boehmer's numerical technique was adopted. Behavior of foundation with pack drain is not simple but very complicated. Discontinuity resulted from rigidity difference between adjacent materials, smear effect and complicated boundary conditions should be considered in the behavior analysis of foundation behavior. The results of numerical analysis were influenced by smear zone. In relevant to this effect, finite element analysis was carried out using the reduced horizontal coefficient of permeability in the smear zone; The numerical results were compared with observed values in surface settlement. including pore water pressure. However only lateral di5plaoement by numerical ana1Ysis was shown since its measurement was not performed in the field. The predication of settlement to be developed later can be effectively employed for the obtimization of construction. The predication of residual settlement using the data measured in the field was made by Hoshino, Asaoka and hyperbolic method. Among them, the hyperbolic method proved best one. Settlements accorded well between numsrical and observed values while pore pressure showed a slight difference. Lateral displacement showed largest values at constant distance from ground surface. The validation of foundation analysis improved with pack drain by computer program employed in this study selecting modified Cam-clay model was satisfactorily secured.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• 한국항공우주학회지
• /
• 제36권8호
• /
• pp.728-733
• /
• 2008

경계요소법을 이용하여 비평면 지면 위를 움직이는 공압부양 고속 지상운송체의 비정상 공력해석을 수행하였다. 비정상 공력해석을 위하여 시간전진법과 이에 연계한 자유후류를 도입하였다. 공압부양 고속 지상운송체가 채널 내를 움직일 때, 채널에 갇힌 공기에 의해 지면효과가 증가하여 운송체의 양력계수와 피칭모멘트 계수가 더욱 증가한다. 즉, 채널과 같은 비평면 지면은 운송체의 종방향 불안정성을 증가시킨다. 반면, 채널과 같은 비평면 지면에 의한 양력상승이 운송체 탠덤날개의 왼쪽과 오른쪽에 동일하게 발생하기 때문에 채널과 같은 비평면 지면효과가 운송체의 횡방향 안정성에 미치는 영향은 크지 않다.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.163-171
• /
• 2001

콘크리트 구조물과 토공의 인접부인 구조물 뒷채움의 구조적 연속성을 위해서는 뒷채움 시공이 중요하다. 뒷채움부의 구조적 연속성을 증가시키기 위해서는 양질의 뒷채움재 사용과 대형 진동다짐장비에 의한 정밀다짐이 효과적이다. 그러나 정밀다짐시에 발생하는 과도한 토압에 의해 암거 구조물에 구조적 결함이 발생할 수 있다. 본 연구에서는 다짐재와 다짐방법을 변화시키면서 2개소의 암거를 건설하였다. 뒷채움재로는 선택층재와 노상토재를 사용하였다. 뒷채움 다짐시에 큰 다짐에너지를 얻기 위하여 대부분의 경우 총중량 11~12톤의 다짐롤러를 2000rpm 에서 2400rpm의 주파수로 적용하였다. 노상토를 사용하여 뒷채움 시공을 하는 경우에는 충격완화재를 설치하여 동적 수평하중에 미치는 영향을 분석하였다. 충격완화재로는 EPS재와 타이어 칩을 사용한 패널들을 사용하였으며, 뒷채움 시공시에 이들 충격완화재를 암거의 외벽체에 부탁하였다. 본 논문에서는 콘크리트 암거의 뒷채움 시공시에 발생하는 동적지응력 특성을 기술하였다. 계측 결과, 다짐하중에 의한 수직토압과 수평토압의 크기는 다짐재료, 다짐 측정깊이 및 다짐방법에 의존하고 있었다. 뒷채움 다짐시에는 정적토압계수 보다 큰 동적토압계수$(\DeltaK_{dyn}=\DeltaK\sigma_h\DeltaK\sigma_v)$를 나타내고 있어 동적토압에 의해 암거에 유해한 영향을 줄 수 있다. 충격완화재 EPS(t=10cm)와 고무계(t=5cm)는 암거 벽체에 작용하는 동적 수평토압을 경감시키는데 효과적인 것을 알았다.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.53-73
• /
• 2013

Prediction of prestressed concrete girder integral abutment bridge (IAB) load effect requires understanding of the inherent uncertainties as it relates to thermal loading, time-dependent effects, bridge material properties and soil properties. In addition, complex inelastic and hysteretic behavior must be considered over an extended, 75-year bridge life. The present study establishes IAB displacement and internal force statistics based on available material property and soil property statistical models and Monte Carlo simulations. Numerical models within the simulation were developed to evaluate the 75-year bridge displacements and internal forces based on 2D numerical models that were calibrated against four field monitored IABs. The considered input uncertainties include both resistance and load variables. Material variables are: (1) concrete elastic modulus; (2) backfill stiffness; and (3) lateral pile soil stiffness. Thermal, time dependent, and soil loading variables are: (1) superstructure temperature fluctuation; (2) superstructure concrete thermal expansion coefficient; (3) superstructure temperature gradient; (4) concrete creep and shrinkage; (5) bridge construction timeline; and (6) backfill pressure on backwall and abutment. IAB displacement and internal force statistics were established for: (1) bridge axial force; (2) bridge bending moment; (3) pile lateral force; (4) pile moment; (5) pile head/abutment displacement; (6) compressive stress at the top fiber at the mid-span of the exterior span; and (7) tensile stress at the bottom fiber at the mid-span of the exterior span. These established IAB displacement and internal force statistics provide a basis for future reliability-based design criteria development.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.547-567
• /
• 2015

This study investigates the behavior of group of tapered and cylindrical piles. The bearing capacities of groups of tapered and cylindrical piles are computed and compared. Modeling of group of piles in this study is conducted in sand using three-dimensional finite element software. For this purpose, total bearing capacity of each group is firstly calculated using the load-displacement curve under specific load and common techniques. Then, the model of group of piles is reloaded under this calculated capacity to find group settlements, stress states on the lateral surfaces of group block, efficiency of group and etc. In order to calculate the efficiency of each group, single tapered and cylindrical piles are modeled separately. Comparison for both tapered and cylindrical group of piles with same volume is conducted and a relation to predict tapered pile group efficiency is developed. A parametric study is also performed by changing parameters such as tapered angle, angle of internal friction of sand, dilatancy angle of soil and coefficient of lateral earth pressure to find their influences on single pile and pile group behavior.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.32-38
• /
• 2019

높은 후퇴각을 갖는 둥근 앞전 날개 형상은 앞전 와류에 의해 복잡한 유동 현상이 나타난다. 불안정한 방향 안정성을 갖는 무미익 플라잉윙의 제어를 위해서 플래퍼론이 사용된다. 본 연구에서는 플래퍼론이 전개된 비세장형, 둥근 앞전의 플라잉윙 형상의 전산해석을 수행하였으며 옆미끄럼각 및 플래퍼론에 대한 영향을 분석하였다. 공력계수 분석을 통해 양력과 항력계수에 대한 옆미끄럼각의 영향은 적으며 측력 및 모멘트 계수는 옆미끄럼각의 영향을 크게 받음을 알 수 있었다. 정적 안정성 분석을 통해 플래퍼론이 전개된 플라잉윙의 가로안정성과 방향안정성이 좋아졌음을 확인하였다. 또한 압력계수분포, 표면 마찰선의 관찰을 통해 앞전 와류 구조 및 거동을 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.435-440
• /
• 2000

It is important to pay careful attention to construction backfill for the structural integrity of concrete box culvert. The stability of the surrounding soil is important to the structural performance of most culverts. Good compaction by the dynamic compaction roller with big capacity is as effective as good backfill materials to increase the structural integrity of culvert. However structural distress of the culvert could be occur due to the excessive earth pressure by dynamic compaction load. In this study, 16 box culverts were constructed with various compaction materials and construction methods. Three types of on-site soils such as subbase, subgrade and roadbed materials were used as backfill materials in the test program. Compaction methods were adapted based on the site conditions. In most cases, dynamic compaction rollers with 10 to 16 ton weights were used and vibration speed were applied from 2400 to 2500 rpm for the great compaction energy. Some backfill compactions with good quality soils were carried out to examine the effect of EPS(Expanded Polystyrene) panels with changes of compaction thickness. This paper presents the main results of the research conducted to access the engineering performance of the backfill materials. The characteristics of earth pressures are discussed. It is observed that subgrade and roadbed materials are needed more careful compaction than subbase materials. It is shown that EPS panels are effective to mitigate dynamic lateral earth pressure on the culverts. It is also obtained that the dynamic pressure depends on the soil properties. In addition, the coefficient of dynamic earth pressure (K$\sub$dyn/=ΔP$\sub$H/ ΔP$\sub$V/) during compaction is discussed.