• 한국운동역학회지
• /
• 제12권2호
• /
• pp.91-107
• /
• 2002

이 연구는 배드민턴 경기기술 중 클리어에 대한 연구 대부분 경기분석 및 타법사용에 대한 연구에 국한되어 있어 여자중학생 배드민턴 선수를 대상으로 하이클리어 동작을 운동학적 변인으로 측정 분석하였다. 이 연구의 대상자는 충청북도에 위치한 C여자중학교 배드민턴 선수 4명이었으며, 동작의 분석 범위는 준비자세에서 동작의 시작순간, 라켓이 최대로 백 스윙 된 순간, 라켓과 셔틀콕이 임팩트 되는 순간, 임팩트 이후의 마무리 스윙동작까지로 단계별 동작을 설정하였다. 여자중학생 하이클리어 동작을 운동학적으로 분석한 결과 다음과 같은 결론을 얻었다. 피험자 대부분 백 스윙 단계에서 어깨 및 팔꿈치 관절을 충분히 회전하지 못한 것으로 나타났고, 특정 관절 부분에만 좋은 동작을 나타내 관절의 협용동작이 떨어지는 것으로 보였다. 피험자 S1과 S2가 임팩트 단계에서 어깨 및 팔꿈치 관절은 크게 천천히 스윙하다가 오른 손목관절 및 라켓헤드의 속도는 빠르게 나타나 다른 피험자 보다 관절의 협웅동작이 잘 이루어진 것으로 나타났다. 피험자 모두 성장기에 있는 학생으로서 관절의 유연성에 기인하여 오른 어깨각도 변화는 큰 각도를 보였고 각속도는 피험자 S3이 다른 피험자 보다 기술적 차이를 보여 개선될 점으로 나타났다. 피험자 모두 오른 팔꿈치 각도 변화는 비슷한 양상을 보였고 각속도에서 피험자 S2는 백 스윙단계부터 임팩트 시 심한 굴곡의 형태를 보여 힘을 효과적으로 사용하지 못한 것으로 나타났다. 피험자 모두 오른 손목각도의 변화는 백 스윙 직후 큰 각도를 이루지 못하고 임팩트 직후 손목의 빠른 굴곡이 형성되지 못하여 셔틀콕의 속도가 감속될 것으로 나타났다. 그러나 각속도는 피험자 S1과 S4는 임팩트 시 음(-)의 각속도 값을 보여 강한 스냅을 이용하고 빠르게 움직이고 있다고 볼 수 있다. 피험자 모두 임팩트 시 무릎각도의 크기는 큰 각도를 이룬 반면 고관절 각도는 작은 각도를 보여 무릎관절과 고관절과의 합성동작인 강한 허리힘을 이용하지 못한 것으로 나타났다.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.83-98
• /
• 2004

The purpose of this study was to determine the kinematic variables of the hurdling for a korea record holder (A) and a national hurdle representative (B). after the kinematic variables such the distance and the distance and height of C.G, the velocity and the angle were analyzed about the hurdling. The results were summarized as follows; 1. In terms of the distance and the height of C.G, subject A showed long in horizontal distance from C.G to the take-off phase, but showed short in the landing phase. Subject B showed short in horizontal distance from C.G to the take-off phase, and showed long in the landing phase. 2. In terms of the velocity of C.G, Subject A showed fast C.G velocity in horizontal direction to the braking phase, Subject A and B showed slower C.G velority in the landing phase, but Subject A showed height C.G velocity in vertical direction to the to the take-off, the landing, and propulsion phase 3. In terms of the angle of C.G and lean of C.G to front at the braking and the take-off phase. Subject A kept the less angle in the maximum trunk lean to front at the flight phase as comparison with Subject B. 4. In terms of the velocity of the knee and the ankle joint. Subject A showed fast in the resultant velocity of the left ankle joint the take-off phase, but showed slow in the left knee joint. Subject B showed fast in the resultant velocity of the left knee joint the take-off phase, but showed slow in the right knee and the right ankle joint.

• PNF and Movement
• /
• 제19권1호
• /
• pp.147-152
• /
• 2021

Purpose: This study was conducted to investigate the functional differences of the two heads of the biceps brachii by measuring the functions in supination according to pronation by the angle of the flexion of the elbow joint, except for the activities of the elbow flexors. Methods: This study was conducted with 25 healthy men in their 20s. At a glenohumeral-joint 0˚ flexion posture, angles of flexion of the elbow joint of 0˚, 30˚, 60˚, 90˚, and 120˚ were randomly provided, and they were asked to perform supination and pronation with an elastic band. Using an eight-channel surface electromyogram, the muscle activities of the long and short heads of the biceps brachii were measured. The activities of the short and long heads according to the angle were analyzed using a one-way ANOVA, and as a post-test, LSD was employed. Results: The analysis of the impact of the resistance of the elastic band in supination on the differences in the muscle activities in the short and long heads suggests there was a significant difference between 0˚ and 30˚ (p < 0.05). Conclusion: In supination according to forearm pronation, the long head had greater action in the early flexion posture of the elbow joint, and it is judged that the ratio of the flexion of the elbow joint according to the actions of the biceps brachii was considered small.

• 대한물리의학회지
• /
• 제12권4호
• /
• pp.113-122
• /
• 2017

PURPOSE: The purpose of this study was to investigate the comparison of muscle activity and mechanical loading according to the angle of ankle joint during a sit-to-stand (STS) task. METHODS: Thirty-four young participants performed the STS in a randomized trial with the ankle joint at a neutral, 15 degrees dorsiflexion and 15 degrees plantarflexion angle in a fixed sitting posture with the knee in 105 degrees flexion. Muscle activity of the tibialis anterior (TA), rectus femoris (RF), biceps femoris (BF), and gastrocnemius medialis (GCM) was measured, and the parameters calculated in relation to mechanical loading were the STS-time, maximum peak, minimum peak, and total sum of mechanical loading. RESULTS: In the dorsiflexion position, the muscle activity of the TA and GCM showed a significant increase (p<.05), and the STS time, maximum peak and total sum of mechanical loading showed a significant difference compared to that in the neutral position (p<.05). In the plantarflexion position, the muscle activity of the RF and GCM showed a significant increase (p<.05), while that of the TA showed a significant decrease (p<.05) compared to that in the neutral position. And the minimum peak was significantly increased than the neutral position (p<.05), and the maximum peak and total sum of mechanical loading were showed significant difference compared with dorsiflexion position (p<.05). CONCLUSION: These results show that there is a difference in muscle activity and mechanical loading when performing the STS movement according to the change in the ankle joint angle.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.188-193
• /
• 2005

The purpose of this paper is to develop a more precise damper model of the joint for the quantification of the joint mechanical properties. We modified the linear damper model of a knee joint model to nonlinear one. The normalized RMS errors between the simulated and measured joint angle trajectories during passive pendulum test became smaller with the nonlinear damper model than those of the linear one which indicates the nonlinear damper model is better in precision and accuracy. The error between the experimental and simulated knee joint moment also reduced with the nonlinear damper model. The reduction in both the trajectory error and the moment error was significant at the latter part of the pendulum test where the joint angular velocity was small. The nonlinearity of the damper was significantly greater at thin subject group and this indicates the nonlinearity is a useful index of joint mechanical properties.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.135-144
• /
• 2007

The purpose of this study was to identify the effect of the subtalar sling ankle taping, by measuring changes in peak plantar pressure and subtalar angle during jump landing and walking in healthy subjects with subtalar sling ankle taping applied of the ankle joint. Fifty healthy subjects(8 males and 7 female, aged 22 to 25) were randomly divided into a participated in this study. They were free of musculoskeletal injury and neurologic deficit in lower extremity. The subjects were asked to perform 5M walking and single leg jump landing by under the guidance of physical therapists. Subtalar motions were typically measured as the angle made between the posterior aspect of the calcaneous and the posterior aspect of the lower leg during walking with taping or not. This measurement were made using a video system (30Hz sampling rate, rectified 60 Hz sampling rate). At the same time, peak lateral and vertical pressure were investigated using pressure distribution platforms(MatScan system) under foot during walking and single leg jump landing with taping or not. Statistical analysis was done by paired t-test and intraclass correlation coefficient [ICC(3.1)], using software SPSS. We have recently demonstrated significantly altered patterns of subtalr joint and peak plantar pressure when applied subtalar sling ankle taping(p<.05). Inversion angle of subtalar joint significantly decreased with taping(p<.05). The result suggest that pressure patterns observed in subjects are likely to result due to significant decrease in stress on ankle joint structures during jump landing and walking. Also, the result that the subtalar sling ankle taping procedure provides greater restiction of motion associated with ankle inversion. However, this study involved asymptomatic subjects without history of ankle inversion injury, further research is needed to assess the motion restraining effect of the subtalar sling ankle taping in subjects with lateral ankle instability.

• 대한정형도수물리치료학회지
• /
• 제28권1호
• /
• pp.39-51
• /
• 2022

Background: The purpose of this study is to investigate the effect of neck and shoulder self-stretching exercise using audiovisual media on neck pain, postural alignment, and joint position error in women with chronic neck pain. Methods: The subjects included 20 women that gave consent to participate in the study voluntarily. They performed the self-stretching exercises using audiovisual media was carried out 20 minutes 5 times a week during 3 weeks. Neck disability index (NDI) and visual analogue scale (VAS) were used to measure the functional disability and pain, A pressure pain threshold was measured using an algometer, and a cervical range of motion (CROM) measurement tool was used to measure the range of motion and error of proprioceptive position sense of the cervical spine. To assess posture alignment, forward head angle (FHA), forward shoulder angle (FSA) were measured using image J software. Results: The neck pain intensity was statistically significantly within group (p<.05). Neck and shoulder functional disability were a statistically significant difference within group (p<.05). Splenius capitis and upper trapezius pressure pain threshold were statistically significant difference in within group (p<.05). The postural alignment was statistically significantly within group (p<.05). The cervical range of motion in neck extension, right and left lateral flexion were statistically significantly within group (p<.05). The joint position error in neck flexion, extension, right and left lateral flexion decreased statistically significantly within group (p<.05). Conclusion: Self-stretching exercise using audiovisual media increased the mobility of the neck, decreased neck pain and joint position error, and improved posture alignment. As a result, there was a positive effect by applying the self-stretching exercise using audiovisual media to people with neck pain. Based on this, it is thought that it can be used as the basis for research related to home training programs for healthy self-management.

• 국제물리치료학회지
• /
• 제11권3호
• /
• pp.2119-2125
• /
• 2020

Background: Adults with forward head posture (FHP) often suffer from thoracic hyperkyphosis and thoracic dysfunction, and including reduction of the craniovertebral angle (CV angle) and tightening of the superficial neck muscles. In order to treat thoracic dysfunction, interventions aimed at improving thoracic mobility are necessary. Objectives: To examine the effects of maitland manual mobilization therapy on the thoracic spine in adults with FHP. Design: Single-blind randomized controlled trial. Methods: Thirty adults with FHP who met the selection criteria were randomized to the thoracic multiple joint mobilization (TMJM; n=15) group and the thoracic general joint mobilization (TGJM; n=15) group. Joint mobilizations were performed for 23 minutes a day for 4 weeks continuously, two times per week. Outcome measures were ImageJ, BTS FREE EMG 1000, neck disability Index (NDI). Results: Although changes in the left sternocleidomastoid muscle activity and NDI scores over time between the two groups differed, other variables were noted only changes observed over time. Muscle activity in the right sternocleidomastoid increased again in the TGJM group post-intervention and 2 weeks after the end of the experiment, but changes in other variables were retained or improved, confirming the lasting effects of thoracic joint mobilization. Conclusion: Thoracic multiple joint mobilization may be recommended as a more effective intervention for adults with FHP.

• 대한물리의학회지
• /
• 제5권3호
• /
• pp.405-412
• /
• 2010

Purpose : The purpose of this study was to assess the effects of the trunk muscle activity on bridging exercise according to the knee joint angle. Methods : Twenty-five healthy adults volunteered to participate in this study. Subjects were required to complete following four bridging exercises; knee joint flexion $120^{\circ}$, $90^{\circ}$, $60^{\circ}$, $45^{\circ}$. Surface electromyography from selected trunk muscles was normalized to maximum voluntary isometric contraction. Muscle activity was measured by QEMG-4 system(LXM 3204, Laxtha Korea). A repeated measures of one-way ANOVA with post-hoc Bonferroni's correction was used to determine the influence of bridging exercise on muscle activity for each muscle and descriptive statistics was used to determine local/global muscle ratio. Results : The internal oblique of bridging exercises $120^{\circ}$, $90^{\circ}$ showed significantly(p<.05). The erctor spinae of all bridging exercises showed significant excepted between $60^{\circ}$ and $45^{\circ}$(p<.05). Median of internal oblique/rectus abdominis ratio of $120^{\circ}$ was 4.41, $90^{\circ}$ was 3.94, $60^{\circ}$ was 3.58, $45^{\circ}$ was 3.39. Median of internal oblique/external oblique ratio of $120^{\circ}$ was 2.66, $90^{\circ}$ was 2.43, $60^{\circ}$ was 2.87, $45^{\circ}$ was 2.64. Conclusion : Angular motion decreasing with knee joint flexion made erector spinae activation increase. on the other hand, as decreasing abdomen muscle activation, the more performing motor learning is required for abdomen muscle strength and co-contraction for the trunk stabilization.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.