• 약학회지
• /
• 제47권3호
• /
• pp.148-153
• /
• 2003

Skin moisture is an important factor in skin health. Measurement of moisture content can provide diagnostic information on the condition of skin. In this study, a portable near-infrared (NIR) system was newly integrated with a photo diode array detector that has no moving parts, and this system has been successfully applied for the evaluation of human skin moisture. Diffuse reflectance spectra were collected and transformed to absorbance using 1 nm step size over the wavelength range of 1100 nm to 2200 nm. Partial least squares regression (PLSR) was applied to develop a calibration model. For practical use for the evaluation of human skin moisture, the PLS model for human skin moisture was developed in vivo using the portable NIR system on the basis of the relative water content values of stratum corneum from the conventional capacitance method. The PLS model showed a good correlation. The calibration with the use of PLS model predicted human moisture with a standard error of prediction (SEP) of 3.5 at 1120∼1730 nm range. This study showed the possibility of skin moisture measurement using portable NIR system.

• 한국컴퓨터그래픽스학회논문지
• /
• 제2권2호
• /
• pp.69-74
• /
• 1996

최근 점점 통합되는 세계시장과 증가하는 경쟁에서 살아남기 위해 시간과 공간의 제약을 받지 않고 제품정보를 공유할 수 있는 기술의 확보가 요구되고 있다. 제품정보의 공유를 위한 방안으로 제품정보를 중립형태의 표준으로 표현해 네트워크를 통해 전송하는 방법이 있다. 본 논문에서는 인터넷상에서 STEP 물리적 파일의 3차원 형상정보를 가시화하는 방법을 소개한다. 제품정보의 국제표준으로 새롭게 제시되는 STEP에서 형상정보가 어떻게 표현되는지 알아보고, 인터넷 환경에서의 프로그래밍 언어인 자바와 3차원 데이터 포맷인 VRML을 이용하여 형상정보를 가시화한 후 각각의 장단점을 파악하여, STEP 모델 가시화 기술을 자동차 PDM에 적용해 본다.

• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.87-142
• /
• 2022

An analysis for the computation of Fatigue Damage Index (FDI) under the effects of the various combination of the ocean loads like random waves, current, platform motion and VIV (Vortex Induced Vibration) for a certain design water depth is a critically important part of the analysis and design of the marine riser platform integrated system. Herein, a 'Computer Simulation Model (CSM)' is developed to combine the advantages of the frequency domain and time domain. A case study considering a steel catenary riser operating in 1000 m water depth has been conducted with semi-submersible. The riser is subjected to extreme environmental conditions and static and dynamic response analyses are performed and the Response Amplitude Operators (RAOs) of the offshore platform are computed with the frequency domain solution. Later the frequency domain results are integrated with time domain analysis system for the dynamic analysis in time domain. After that an extensive post processing is done to compute the FDI of the marine riser. In the present paper importance is given to the nature of the current profile and the VIV. At the end we have reported the detail results of the FDI comparison with VIV and without VIV under the linear current velocity and the FDI comparison with linear and power law current velocity with and without VIV. We have also reported the design recommendations for the marine riser in the regions where the higher fatigue damage is observed and the proposed CSM is implemented in industrially used standard soft solution systems (i.e., OrcaFlex^*TM and Ansys AQWA^**TM), Ms-Excel^***TM, and C++ programming language using its object oriented features.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.19-29
• /
• 2016

Whilst there are growing interests in pursuing energy efficiency and zero-energy buildings in built environment, it is widely recognised that Building-Integrated Photovoltaic (BIPV) is one of the most promising and required technologies to achieve these goals in recent years. Although BIPV is a broadly utilized technique in variety of fields in built environments, it is required that generation of BIVP should be analysed and calculated by external specialists. The aim of this research is to focus on developing a new diagram for prediction of the pre-estimation model in early design stage to harness solar radiation data, PV types, slopes, azimuth and so forth. The results of this study show as follows: 1) We analysed 162 districts in a national level and the examined areas were categorised into five zones. The standard deviation of the results was 2.9 per cent; 2) The increased value of solar radiation on a vertical plane in five categorised zones was 42kWh/m3, and the result was similar to the average value of 43.8kWh/m3; and 3) The pre-estimation of diagram was developed based on the categorisation of zones and azimuth as well as the results of the developed diagram showed little difference compared to the previously utilised method. The suggested diagram in this paper will contribute to estimate BIPV without any external contribution to calculate the value. Even though the result of this study shows little difference, it is required to investigate a number of different variables such as BIPV types, modules, slope angle and so forth in order to develop an integrated pre-estimation diagram.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.111-119
• /
• 2021

Multi-dimensional analysis of reactor safety-KINS standard (MARS-KS) is a thermal-hydraulic code to simulate multiple design basis accidents in reactors. The code has been essential to assess nuclear safety, but has mainly focused on light water reactors, which are in the majority in South Korea. Few previous studies considered pressurized heavy water reactor (PHWR) applications. To verify the code applicability for PHWRs, it is necessary to develop MARS-KS input decks under various transient conditions. This study proposes an input model to simulate small-break loss of coolant accidents for PHWRs. The input model includes major equipment and experimental conditions for test B9802. Calculation results for selected variables during steady-state closely follow test data within ±4%. We adopted the Henry-Fauske model to simulate break flow, with coefficients having similar trends to integrated break mass and trip time for the power supply. Transient calculation results for major thermal-hydraulic factors showed good agreement with experimental data, but further study is required to analyze heat transfer and void condensation inside steam generator u-tubes.

• 한국통신학회논문지
• /
• 제11권2호
• /
• pp.108-121
• /
• 1986

音聲과 데이터가 集積된 패킷 通信網의 性能을 豫測하고 시스템 파라메터를 最適化하기 위한 시뮬레이터의 개발에 관하여 記述하였다. 具現된 시뮬레이터는 CCITT의 勸告事項에 따라 運用되는 데이터 터미널이나 host는 물론 패킷 音聲터미널도 연결가능한 音聲 및 데이터集積通信網의 性能을 여러 상황에서 豫測할 수 있다. 시뮬레이션 技法으로는 지금까지 알려진 세가지 discrete event 시뮬레이션 技法 중 process interaction 方法이 사용되었는데 이 方法을 사용하면 실제 시스템과 가장 비슷한 시뮬레이터를 具現할 수 있다. 시뮬레이터는 약 4,000line의 GPSS 시뮬레이션 언어와 PL/I으로 具現되었다. 시뮬레이터의 컴퓨터 run time을 줄이기 위하여 GPSS의 LINK block을 사용함으로써 條件的 event의 數를 줄이는 方法을 사용하였다. 구현된 시뮬레이터를 사용하여 7-node 通信網의 性能을 豫測하였다. 또 개발된 시뮬레이터의 妥當性을 檢證하기 위하여 간단한 音聲과 데이터 multiplexer를 시뮬레이션 모델로 구성한 뒤 그 시뮬레이션 결과를 解釋的 방법에 依한 결과와 比較하였다.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.113-121
• /
• 2023

Recently, low hydrogen carbon production technology is drawing interest due to lower production costs. Although the pace of research in this field has been accelerating, there is no well-established criteria for evaluation. The most of current evaluation methods needs information related to technology. However the technology is not enough to provide effective evaluation criteria because the technology is not fully developed. In this study, we propose an integrated Delphi-analytic hierarchy process (AHP) method and low carbon hydrogen production technology evaluation model. Experts opinion is used to provide evaluation criteria for the technology. In this study, integrated Delphi-AHP method are utilized for determining factors and calculating their numerical importance based on experts opinion. Then, sensitivity analysis is performed to verify the robustness of the analysis and scenarios of potential changes. As many as 11 factors are identified by Delphi method. Then, numerical importance of the factors are calculated by AHP. Sensitivity analysis is performed. It shows that intellectual property right (IPR) is always more important than other factors. This study proposes the numerical standard for the low carbon hydrogen production technology evaluation. The proposed model can be used for technology evaluation or commercialization.

• 한국정보처리학회논문지
• /
• 제2권3호
• /
• pp.397-405
• /
• 1995

생산 공정에서 공동의 작업 범위 지역에 위치한 제어 기기들에 대한 보다 효율적인 운영과 자원을 공유하기 위하여 네트워크 기술이 적용되어 운영되고 있다. 본 논문에서는 네트워크 운영 계층의 실장 규격을 CIM에서 공동 제조 영역으로 제안한 cell혹은 group을 위한 MAP 규격의 응용 계층인 MMS로 선정하였다. MMS는 통신 기능의 추상화된 메세지로 특정 디바이스를 고려하지 않으므로,제조 공정의 단위 제어 기기를 운영하기 위하여서는 특정한 메세지 규격을 정의하여야 한다. 이러한 문제를 해결하기 위하여 단위 제어 기기별 컴패니언 규격을 적용하여 추상화된 객체인 가상제조 기기 (VMD)를 설계하고 이를 군관리 모델 시스템에서 운영하였다. 군관리 운영에서는 군관리 시스템과 단위 제어 기간의 통신은 VMD와 설계 제어 기기간의 매핑을 수행하므로써 운영할 수 있다.

• 한국ITS학회 논문지
• /
• 제11권4호
• /
• pp.34-50
• /
• 2012

본 연구는 국내 ITS 분야 센터와 노변간 통신의 상호 운영성 및 호환성과 국제경쟁력을 확보하기 위해 국내 도입이 필요한 ITS 센터와 노변간 통신환경에 대한 정의와, 이의 도입을 위한 기술적/정책적 방안을 수립하고 정보교환 에뮬레이터를 개발하여 VMS를 시범적용 함으로써 이에 대한 유효성을 검증하였다. 먼저, 국내 도입이 필요한 ITS 센터와 노변간 정보교환 표준 환경은 DATEX와 SNMP 듀얼 프로토콜로 정의하고, 메타속성 정의, OID 도입 등 메시지 정의 체계에 대해 제시하였다. 도입을 위한 기술적/정책적 방안으로는 표준도입 시범사업을 통한 Feed-back으로 충분한 실효성 확보, 표준에 대한 교육/홍보 선행, ITS 분야 OID 도입 및 체계적인 관리방법, 정보교환 표준규격에 적합한 하드웨어 표준 규격의 개발, 듀얼프로토콜 도입을 위한 통합관리시스템 구축이 필요함을 제시하였다.

• 한국IT서비스학회지
• /
• 제21권2호
• /
• pp.97-107
• /
• 2022

Recently, interest in smart factories is increasing. Investments to improve intelligence/automation are also being made continuously in manufacturing plants. Facility automation based on sensor data collection is now essential. In addition, we are operating our factories based on data generated in all areas of production, including production management, facility operation, and quality management, and an integrated standard information system. When producing LCD polarizer products, it is most important to link trace information between data generated by individual production processes. All systems involved in production must ensure that there is no data loss and data integrity is ensured. The large-capacity data collected from individual systems is composed of key values linked to each other. A real-time quality analysis processing system based on connected integrated system data is required. In this study, large-capacity data collection, storage, integration and loss prevention methods were presented for optimization of LCD polarizer production. The identification Risk model of inspection products can be added, and the applicable product model is designed to be continuously expanded. A quality inspection and analysis system that maximizes the yield rate was designed by using the final inspection image of the product using big data technology. In the case of products that are predefined as analysable products, it is designed to be verified with the big data knn analysis model, and individual analysis results are continuously applied to the actual production site to operate in a virtuous cycle structure. Production Optimization was performed by applying it to the currently produced LCD polarizer production line.