• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.954-958
• /
• 2000

The characterization of zinc diffusion processes applied for high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The zinc diffusion profiles, such as the diffusion depth and the zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severly impacted on the process parameters, such as the amount of Zn$_3$P$_2$ source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.731-734
• /
• 2000

The characterization of Zinc diffusion processes applied fur high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The Zinc diffusion profiles, such as the diffusion depth and the Zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severely impacted on the process parameters, such as the amount of Zn$_3$P$_2$source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.133-136
• /
• 2015

The outward diffusion of $Na^+$ ions in iron-bearing soda lime silicate glass via oxidation heat treatment before the ion exchange process is artificially induced in order to increase the amount of ions exchanged during the ion exchange process. The effect of the addition process is analyzed through measuring the bending strength, the weight change, and the inter-diffusion coefficient after the ion exchange process. The glass strength is increased when the outward diffusion of $Na^+$ ions via oxidation heat treatment before the ion exchange process is added. For the glass subjected to the additional process, the weight change and diffusion depth increase compared with the glass not subjected to the process. The interdiffusion coefficient is also slightly increased as a result of the additional process.

• Communications for Statistical Applications and Methods
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2015

We introduce a surplus process which follows a diffusion process with positive drift and is subject to two types of claim. We assume that type I claim occurs more frequently, however, its size is stochastically smaller than type II claim. We obtain the ruin probability that the level of the surplus becomes negative, and then, decompose the ruin probability into three parts, two ruin probabilities caused by each type of claim and the probability that the level of the surplus becomes negative naturally due to the diffusion process. Finally, we illustrate a numerical example, when the sizes of both types of claim are exponentially distributed, to compare the impacts of two types of claim on the ruin probability of the surplus along with that of the diffusion process.

• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.15-20
• /
• 2019

The superplastic forming/diffusion bonding process has been developed to fabricate a core frame structure with joint nodes out of tubes, for the development of a titanium high performance bicycle. The hydroforming process has been applied for bulging of a tube in the superplastic condition before, and during the diffusion bonding process. In this experiment, a commercial Ti-3Al-2.5V tube was selected as raw material for the study. The forming experiment has been performed using a servo-hydraulic press with a capacity of 200 ton. Next, nitrogen gas was used to acquire necessary pressure for the bulging and bonding of the tubes to fabricate the joint nodes. The pertinent processing temperature was $870^{\circ}C$ for the superplastic hydroforming/diffusion bonding (SHF/DB) process, using the Ti-3Al-2.5V tube. The bonding quality and the progress of bulging and diffusion bonding have been observed by the investigation of the joining interfaces at the cross section of the joint structure. The control of the nitrogen pressure throughout the SHF/DB process, was an important factor to avoid any significant defects in the joint structure. The whole progress stage of the diffusion bonding could be observed at a joint interface. A core structure with 5 joint nodes to manufacture a titanium bicycle could be obtained in a SHF/DB process.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.19-21
• /
• 2004

This paper presents a 3-dimensional diffusion simulation with adaptive solution strategy. The developed diffusion simulator VLSIDIF-3 was designed to re-refine areas. Refine scheme was calculated by the difference of doping concentration between any of two nodes. Each element is greater than tolerance and redo diffusion process until error is tolerable. Numerical experiment in low doping diffusion problem showed that this adaptive solution strategy is very efficient in both memory and time, and expected this scheme would be more powerful in complex diffusion model.

• Korean System Dynamics Review
• /
• v.13 no.4
• /
• pp.33-55
• /
• 2012

The research is to identify important diffusion factors and their effects on green car diffusion process using system dynamics perspectives and a causal-loop analysis. Through a deep review on previous research, we have found the important factors of green car diffusion process. Price, driving range, network effect, recharge system, fuel cost had important facilitation on consumer attraction and green car diffusion. Based on the review, we have constructed a causal loop diagram explaining hybrid car diffusion process. We have found 3 important reinforcing loops in the causal loop diagram. Loop for learning & economies of scale(supply side), loop for network effect(consumer side), and loop for battery development(technology side) had most significant roles in the whole diffusion process. Through a deliberate analysis on the 3 causal loops, we have found meaningful results. First, there seems to exist a critical mass in the diffusion. Second, of the 3 loops, the battery technology had most significant role. Third, not consumer installed base but sales must be a standard to decide whether the critical mass is achieved or not. Based on these findings, several meaningful implications are suggested for the government and corporations related to the green car industries.

• Journal of the Korean Mathematical Society
• /
• v.45 no.3
• /
• pp.683-693
• /
• 2008

In this paper, we study the asymptotic behavior of the residual empirical process from diffusion processes. For this task, adopting the discrete sampling scheme as in Florens-Zmirou [9], we calculate the residuals and construct the residual empirical process. It is shown that the residual empirical process converges weakly to a Brownian bridge.

• Korean System Dynamics Review
• /
• v.14 no.3
• /
• pp.25-49
• /
• 2013

As global competition for green car, that is environmentally friendly car, is getting tougher, the governments and the related industries are putting their core efforts in its diffusion. However, the green car sales are disappointing so far. To overcome the gridlock, it is necessary to develop concrete analytical framework to understand the diffusion process. Based on causal loop analysis from the previous work, we have identified main variables and relationships of them in the diffusion process and developed a stock-flow diagram and mathematical formula for the main components. The model would be applied for further quantitative simulation on the diffusion process of green car and other innovative goods as well. Also, we have suggested constructive insights for the policy makers and for the related industries. First, it is important to increase consumers' willingness to consider through marketing and word of mouth to accelerate the diffusion process. Second, in the perspective of the industry, the market share of green car should be increased at the earliest possible stage and this could be done by enhancing each components of green car attractiveness(e.g. price, driving range, social infra). Third, companies should develop a balanced investment between consumer and technology sector through a flexible financial policy. Fourth, the government continuously has the role of investing in the related R&D and social infra building. We expect the green car diffusion model and related formula from the research can provide meaningful tools to analyze the diffusion process of other new and innovative goods based on its deep researched literature review.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.234-234
• /
• 2010

Most high efficiency silicon solar cells use a passivated selective emitter. It have been an important research subject for crystalline silicon solar cells for decades. It is being used in production for high efficiency solar cells. Most of the selective emitter process require expensive extra masking, etching steps, and a double diffusion process making selective emitters not cost effective. In this paper, we study method for single diffusion step selective emitter process as an alternative to not cost effective double diffusion process. Cost effective selective emitter that the efficiency should be increased significantly (mare than 0.2%) and that the process should simple, robust and cheap.