• 한국중재학회지:중재연구
• /
• 제18권3호
• /
• pp.139-163
• /
• 2008

The Collective Dispute Mediation was introduced to Korea with complement the Verbandsklage which was said to be poor at monetary compensation for consumers' damages. and The Collective Dispute Mediation also seems very likely to the class action, but one can resolve the dispute before filing a law suit under the Collective Dispute Mediation. The validity of the Collective Dispute Mediation is the same as the "settlement in court". After reaching the Collective Dispute Mediation, one may have a right to ask the compulsory execution. Under the Collective Dispute Mediation the damaged party must take part directly in the dispute, because the Collective Dispute Mediation is also included in the dispute resolution. Therefore a problem that how can the damaged consumer, who do not directly take part in the dispute process, get the remedy alternatively may arise. However, this problem is solved by Compensation Plan Letter which is described in the "Framework Act on Consumer". By the Compensation Plan Letter, the person who do not directly take part in the dispute process can be remedied ex post facto(Article 68). This thesis is study on The Function and Task of Collective Dispute Mediation in the Framework Act on Consumer in our state.

• 보존과학회지
• /
• 제35권1호
• /
• pp.71-80
• /
• 2019

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

• Smart Structures and Systems
• /
• 제29권1호
• /
• pp.17-28
• /
• 2022

The cable component of cable-stayed bridges is gradually impacted by weather conditions, vehicle loads, and material corrosion. The stayed cable is a critical load-carrying part that closely affects the operational stability of a cable-stayed bridge. Damaged cables might lead to the bridge collapse due to their tension capacity reduction. Thus, it is necessary to develop structural health monitoring (SHM) techniques that accurately identify damaged cables. In this work, a combinational identification method of three efficient techniques, including statistical analysis, clustering, and neural network models, is proposed to detect the damaged cable in a cable-stayed bridge. The measured dataset from the bridge was initially preprocessed to remove the outlier channels. Then, the theory and application of each technique for damage detection were introduced. In general, the statistical approach extracts the parameters representing the damage within time series, and the clustering approach identifies the outliers from the data signals as damaged members, while the deep learning approach uses the nonlinear data dependencies in SHM for the training model. The performance of these approaches in classifying the damaged cable was assessed, and the combinational identification method was obtained using the voting ensemble. Finally, the combination method was compared with an existing outlier detection algorithm, support vector machines (SVM). The results demonstrate that the proposed method is robust and provides higher accuracy for the damaged cable detection in the cable-stayed bridge.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.33-37
• /
• 2002

Recently, composites have been widely applied in the sporting goods, automobile, aerospace industry. As the use of advanced composites increase, specific techniques have been developed to repair damaged composite structures. In order to repair the damaged part, it is required that the material in the damaged area be removed first by utilizing the proper method, and prepreg be laid up in the area and cured under vacuum using the vacuum bagging materials. In curing process, either in an oven or autoclave is to be delamination can be occurred in the sound areas during and/or after the exposure to the elevated curing temperature in case that the repair process is repeated. Therefore, this study was conducted to evaluate the degree of degradation of properties of the cured parts and how it affects to the delamination phenomenon between laminated skin and honeycomb core.

• Journal of Biosystems Engineering
• /
• 제22권1호
• /
• pp.41-48
• /
• 1997

A nondestructive quality inspection technique using acoustic impulse response method was studied to investigate the feasibility of egg shell inspection. An experimental system was built to generate impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seat, a microphone with preamplifier, and a digital oscilloscope connected to Personal Computer by RS-232C interface. The factors such as impulse generating method, egg holding method, and sensor location were evaluated by analyzing the power spectrum density of the measured signal. The results obtained are summarized as follows : 1. From the sampled eggs, the proper conditions for detecting damaged eggs were found as followings; ceramic for the impact ball material, rubber for egg seat material, 20 degrees for an impact angle of pendulum, 10mm for the distance between egg and sensor, the sharp side for impacting part, and 180 degrees for the location of sensor. 2. Examination of the Fourier transformed analysis in beth normal and damaged eggs revealed that those factors such as the resonant frequency, a number of peak frequencies and the magnitude of power spectrum were important to detect damaged eggs.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.709-711
• /
• 2003

The purpose of this study is to detect the damaged red pine trees by pine wilt disease using high resolution satellite image of IKONOS Geo. IKONOS images are segmented with eCognition image processing software. A segment based maximum likelihood classification was performed to delineate the pine stand. The pine stands are regarded as a potential damage area. In order to develop a methodology to detect the location of damaged trees from the high resolution satellite image, black and white aerial photographs were used as a simulated image. The developed method based on filtering technique. A local maximum filter was adapted to detect the location of individual tree. This report presents a part of the first year results of an ongoing project.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.293-298
• /
• 2003

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions(-20, -10, 5, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about six waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature were investigated and observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. TAS test results were increased when test temperature was decrease in all waterproofing membrane. The type of failure was ductile in $30^{\circ}C$ and $40^{\circ}C$, but brittle failure below $20^{\circ}C$. This results were shown that if temperature above $30^{\circ}C$ is continued for a long time, waterproofing material will be damaged by softening and a part of membranes were damaged by hot aggregate in SMA. So we will consider the type of asphalt for choice of the waterproofing membranes.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.617-636
• /
• 2011

We present the numerical implementation, simulation, and validation of the high-velocity impact experiments that have been described in the companion article. In this part, numerical investigations and simulations performed to mimic the tests are presented. The experiments were analyzed by the explicit integration-based software ABAQUS for improved simulations. Targets were modeled with a damaged plasticity model for concrete. Computational results of residual velocity and crater dimensions yielded acceptable results.

• 대한공간정보학회지
• /
• 제6권2호
• /
• pp.105-117
• /
• 1998

본 연구에서는 Landsat-5 TM 데이터를 사용하여, 강원도 양양군, 인제군, 홍천군 일부지역을 대상으로 솔잎혹파리 피해지역과 경년변화를 효율적으로 추출할 수 있는 기법을 연구 제시하였다. 또한 피해상황을 파악하여 피해지역의 지형적 상관관계를 규명하고, 피해확산방향을 예측하여, 인공위성 화상데이터가 산림의 병충해 감시에 유용함을 입증함과 아울러, 효과적인 방제를 위한 기초자료를 제공하는데 그 목적이 있다. 연구결과 수치표고화상을 이용한 BRCT(Backwards Radiance Correction Transformation)기법을 통하여 지형영향으로 인한 그림자지역을 효과적으로 제거시켜, 피해지역 추출시 그 유효성을 높일 수 있었다. 분류된 피해지역은 분석결과 경사 $31^{\circ}{\sim}38^{\circ}$, 온도 $21^{\circ}C{\sim}25^{\circ}C$, 남서 남동 사면 및 산지 최고 표고의 $23%{\sim}39%$에서 피해가 주로 발생하며, 피해가 확산되는 신규지역은 경사향 $46^{\circ}{\sim}180^{\circ}$, 경사도 $27^{\circ}{\sim}30^{\circ}$, 온도 $11^{\circ}C{\sim}12^{\circ}C$ 및 산지최고표고의 $27%{\sim}39%$ 지역에서 피해가 주로 확산됨을 알 수 있었으며, 신규피해지역의 환경인자와 식생지수를 이용하여 피해예측지수(NDI; New Damaged Index)를 개발하였다.

• 한국화재소방학회논문지
• /
• 제16권1호
• /
• pp.39-44
• /
• 2002

Standby mode에서 출화된 콘센트의 화염 패턴 및 전기적 특성에 대해서 분석하였다 탄화 패턴을 분석한 결과 불꽃은 약 50～70cm 정도 방사되었다. 가연물에 착화된 후 약 150sec 경과하였을 때 온도가 약 $300^{\circ}c$까지 상승했으며, 화염은 ceiling jet을 형성하며 급속도로 확산되었다. 트래킹은 극간의 최단거리를 형성하며 이루어졌으며 저항 값은 약 100～300$\Omega$을 나타냈다. 칼받이를 금속 현미경으로 분석한 결과 정상 부분은 비정질 구조를 나타냈으나, 트래킹에 의해 소손된 부분은 수지상 조직(dendrite structure)과 보이드(void)가 고르게 분포되어 있음을 알 수 있다. 용융된 칼받이를 SEM 및 EDX로 분석한 결고 ㅏ정상 부분과 용융된 부분의 구조와 조성 변화에 차이가 있다.