• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.235-246
• /
• 1995

Experiment on the modal balancing of a flexible rotor supported on two kinds of fluid film bearings is performed to verify the modal balancing theory. The fluid film bearings are a tilting pad bearing and a two axial grooved journal bearing. One is inherently stable, but the other is not. The experimental result shows that the modal balancing method is effective for balancing of a high speed flexible rotor system. Besides, the critical speeds and mode shapes measured experimentally are in good coincidence with the results of rotordynamic analysis. Oil whip, which is the instability phenomenon due to fluid film force, is also observed during the experiment.

• Nuclear Engineering and Technology
• /
• v.14 no.2
• /
• pp.64-69
• /
• 1982

Directional correlation measurements for the Co-60 and Cs-134 cascade gamma-rays have been performed in the angular range from 90$^{\circ}$ to 180$^{\circ}$ by use of the fast coincidence scintillation spectrometer incorporated with a gamma-ray polarimeter based on the Compton scattering effect to determine the polarization correlations. The experimental method together with the theoretical background is described, and the results are shown graphically to represent the consistency of the measurement with approximate theoretical estimates.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.157-160
• /
• 2010

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents sa fire, explosion or leakage of toxic gas at factories in order to not only protect economic losses and environmental pollution. In addition, HRA may be used to detect the human errors which may cause accidents or trace back to any mistake on the part of workers. This work focuses on the coincidence of human error and mechanical failure for management of human error, and on some important performance shaping factors to propose a method for improving safety effectively of the process industries.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.341-358
• /
• 1998

The X-ray astronomy team of the Korea Astronomy Observatory(KAO) is planning to develop a multi-cell proportional counter, adopting an anti-coincidence method to reduce its internal background. We have developed a Monte Carlo code to determine the X-ray detection efficiency of the counter. As a check of our code, we successfully reproduced the detection efficiency of Ginga/LAC. In this paper, we report the simulation results for the counter being considered in KAO.

• Journal of Plant Biology
• /
• v.31 no.1
• /
• pp.1-31
• /
• 1988

The forest vegetation of Mt. Naejang, southwestern Korea were classified into ten associations in four alliances of one order by Z-M school method as follows: Quercetalia serrato-mongolicae ord. nov. Rhododendro-Pinion densiflorae all. nov. Rhododendro mucronulati-Pinetum densiflorae Kim et Yim 1986 Acero-Quercion mongolicae all. nov. Rhododendro-Quercetum mongolicae assoc. nov. Carpinion laxiflorae Kim et Yim 1986 Quercetum variabilis Kim et Yim 1986 Carpinetum laxiflorae Kim et Yim 1986 Carpinetum tschonoskii Kim et Yim 1986 Daphniphyllum macropodum community Quercus aliena-Carpinus tschonoskii community Corno-Zelkovion serratae all. nov. Corno-Linderetum erythrocarpae assoc. nov. Torreyo-Zelkovetum serratae assoc. nov. Acero-Zelkovetum serratae assoc. nov. On the other hadn four groups and six subgroups were divided by the species association, and their groups and subgroups showed the coincidence with the alliances and associations, phytosociological units.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.101-106
• /
• 2011

In the present paper, the phenomena of abnormal noise and vibration due to acoustic resonance of CFBC(Circulating Fluidized Bed Combustion) boiler was presented. The acoustic resonance which occurred in the gas path of CFBC boiler system was caused by coincidence of vortex shedding frequency of tube bank and acoustic natural frequency of duct and hopper. And, the phenomena of beating arose from the interference of two closed resonant waves at 66.4Hz and 70.8Hz. There are two control methods for acoustic resonance in this system. The first method is to change the vortex shedding frequency from the structural alterations on the tube bank. And the second method is to change the acoustic natural frequency of the gas path with the installation of anti-noise baffles. The second one which is relatively easy to apply, was adapted in this study. As a result, the noise and vibration level have been decreased by 41dB and 94% at 66.4Hz, respectively. And the improvement of noise and vibration at 70.8Hz was identified by sensory evaluation.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.25-36
• /
• 2020

Rotating systems concern with torsional vibration, and it should be considered in vibration analysis. To do this, the time-dependent torsional vibrations in a single-walled carbon nanotube (SWCNT) under the linear and harmonic external torque, are investigated in this paper. Eringen's nonlocal elasticity theory is considered to demonstrate the nonlocality and constitutive relations. Hamilton's principle is established to derive the governing equation of motion and consequently related boundary conditions. An analytical method, called the Galerkin method, is utilized to discretize the driven differential equations. Linear and harmonic torsional loads, along with determined amplitude, are applied to the SWCNT as the external torques. SWCNT is considered under the clamped-clamped end supports. In free vibration, analysis of small scale effect reveals the capability of natural frequencies in different modes, and this results desirably are in coincidence with another study. The forced torsional vibration in the time domain, especially for carbon nanotubes, has not been done before in the previous works. The previous forced studies were devoted to the transverse vibrations. It should be emphasized that the dynamical analysis of torsion is novel, workable, and at the beginning of the path. The variations of nonlocal parameter, CNT's thickness, and the influence of excitation frequency on time-dependent angular displacement and nondimensional angular displacement are investigated in the context.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3573-3588
• /
• 1996

The flow through a centrifugal compressor impeller was calculated using the 3-dimensional Navier-Stokes solution method. A control volume method based on a rotating curvilinear coordinate system was used to solve the time-averaged Navier-Stokes equations, and a standard k-.epsilon. model was used to obtain eddy viscosity. Numerical results and experimental data were compared for the overall performance of the impeller, the pressure distributions along the shroud wall and the detailed flowfields at the design and off-design conditions, which showed good coincidence. The flow through the impeller is complex with the curvature of the streamlines and rotation. The development of secondary flows and the jet-wake flow characteristics, which is the main source of flow loss, was discussed. Calculation results show quite different patterns as the flow rate changes.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.37-43
• /
• 1997

Density of a dye or pigment teduces by radiant energym and dinsity change induces color change. In this paper, we habe worked out an equation to predict the color change by the radiant energy under the assumption of colorant density changing pattern by radiant energy and the color changing pattern by colorant density chane. And the damaging factors in the equation was established by experiments. To evaluate the efectiveness of the equation and the method, several samples were irradiated by common light source and color change was measured. Good coincidence between the ceasured and the calculated color change was found. And it was also found that there is a close relationhaip between the spectral damaging factor and the spectral absorptance in visible wavelength range.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.558-560
• /
• 2004

Studies on the controlled switching method have been done to prevent the power system surges which cause the insulation deterioration and electro magnetic compatibility (EMC) problems during closing and opening of a circuit breaker. The controlled switching method controls the closing and tripping time in coincidence with the voltage or current to suppress switching surge. It is used to switch condenser bank, no load transformer, and shunt reactor. In this study, basic concept of the controlled switching is introduced, and also the test is performed to find parameters of the controlled switching in a 24kV vacuum circuit. And then, the control device hardware using TMS320C31 DSP has been designed and manufactured. It has been found that the application of IT technology to a circuit breaker is very effective to depress the switching surge.