• 소음진동
• /
• 제5권2호
• /
• pp.235-246
• /
• 1995

Experiment on the modal balancing of a flexible rotor supported on two kinds of fluid film bearings is performed to verify the modal balancing theory. The fluid film bearings are a tilting pad bearing and a two axial grooved journal bearing. One is inherently stable, but the other is not. The experimental result shows that the modal balancing method is effective for balancing of a high speed flexible rotor system. Besides, the critical speeds and mode shapes measured experimentally are in good coincidence with the results of rotordynamic analysis. Oil whip, which is the instability phenomenon due to fluid film force, is also observed during the experiment.

• Nuclear Engineering and Technology
• /
• 제14권2호
• /
• pp.64-69
• /
• 1982

동시섬광분석기를 써서, 각도범위 90$^{\circ}$에서 180$^{\circ}$에 대하여, Co-60 및 Cs-134 감마선의 방향상관을 측정하였다. 그리고, 방향-편극상관의 측정에는 컴프턴산란효과를 응용한 감마선 편광분광기를 병용하였다. 이론적인 배경과 더불어 실험방법이 기술되었으며, 측정값이 이론적인 개산치와 일치함을 보이기위해 실험결과를 도식적으로 나타내었다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.157-160
• /
• 2010

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents sa fire, explosion or leakage of toxic gas at factories in order to not only protect economic losses and environmental pollution. In addition, HRA may be used to detect the human errors which may cause accidents or trace back to any mistake on the part of workers. This work focuses on the coincidence of human error and mechanical failure for management of human error, and on some important performance shaping factors to propose a method for improving safety effectively of the process industries.

• Journal of Astronomy and Space Sciences
• /
• 제15권2호
• /
• pp.341-358
• /
• 1998

천문대 X-선 연구팀에서는 검출기 내부잡음을 줄이기 위해, 반-동시 계수법을 채택하는 다중 셀 비례계수를 개발할 예정이다. 이러한 계수기의 X-선 검출효율 결정을 위해, 몬테카를로 법을 이용하는 수치모의실험 프로그램을 개발하였다. 이 프로그램을 이용하여 Ginga/LAC의 검출효율을 재현할 수 있었고, 그럼으로 해서 수치모의 실험 방법에 대한 검증을 할 수 있었다. 이 논문에서는 천문대에서 고려하고 있는 비례계수기에 대한 수치모의실험 결과들을 보고한다.

• Journal of Plant Biology
• /
• 제31권1호
• /
• pp.1-31
• /
• 1988

The forest vegetation of Mt. Naejang, southwestern Korea were classified into ten associations in four alliances of one order by Z-M school method as follows: Quercetalia serrato-mongolicae ord. nov. Rhododendro-Pinion densiflorae all. nov. Rhododendro mucronulati-Pinetum densiflorae Kim et Yim 1986 Acero-Quercion mongolicae all. nov. Rhododendro-Quercetum mongolicae assoc. nov. Carpinion laxiflorae Kim et Yim 1986 Quercetum variabilis Kim et Yim 1986 Carpinetum laxiflorae Kim et Yim 1986 Carpinetum tschonoskii Kim et Yim 1986 Daphniphyllum macropodum community Quercus aliena-Carpinus tschonoskii community Corno-Zelkovion serratae all. nov. Corno-Linderetum erythrocarpae assoc. nov. Torreyo-Zelkovetum serratae assoc. nov. Acero-Zelkovetum serratae assoc. nov. On the other hadn four groups and six subgroups were divided by the species association, and their groups and subgroups showed the coincidence with the alliances and associations, phytosociological units.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.101-106
• /
• 2011

In the present paper, the phenomena of abnormal noise and vibration due to acoustic resonance of CFBC(Circulating Fluidized Bed Combustion) boiler was presented. The acoustic resonance which occurred in the gas path of CFBC boiler system was caused by coincidence of vortex shedding frequency of tube bank and acoustic natural frequency of duct and hopper. And, the phenomena of beating arose from the interference of two closed resonant waves at 66.4Hz and 70.8Hz. There are two control methods for acoustic resonance in this system. The first method is to change the vortex shedding frequency from the structural alterations on the tube bank. And the second method is to change the acoustic natural frequency of the gas path with the installation of anti-noise baffles. The second one which is relatively easy to apply, was adapted in this study. As a result, the noise and vibration level have been decreased by 41dB and 94% at 66.4Hz, respectively. And the improvement of noise and vibration at 70.8Hz was identified by sensory evaluation.

• Advances in nano research
• /
• 제8권1호
• /
• pp.25-36
• /
• 2020

Rotating systems concern with torsional vibration, and it should be considered in vibration analysis. To do this, the time-dependent torsional vibrations in a single-walled carbon nanotube (SWCNT) under the linear and harmonic external torque, are investigated in this paper. Eringen's nonlocal elasticity theory is considered to demonstrate the nonlocality and constitutive relations. Hamilton's principle is established to derive the governing equation of motion and consequently related boundary conditions. An analytical method, called the Galerkin method, is utilized to discretize the driven differential equations. Linear and harmonic torsional loads, along with determined amplitude, are applied to the SWCNT as the external torques. SWCNT is considered under the clamped-clamped end supports. In free vibration, analysis of small scale effect reveals the capability of natural frequencies in different modes, and this results desirably are in coincidence with another study. The forced torsional vibration in the time domain, especially for carbon nanotubes, has not been done before in the previous works. The previous forced studies were devoted to the transverse vibrations. It should be emphasized that the dynamical analysis of torsion is novel, workable, and at the beginning of the path. The variations of nonlocal parameter, CNT's thickness, and the influence of excitation frequency on time-dependent angular displacement and nondimensional angular displacement are investigated in the context.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3573-3588
• /
• 1996

The flow through a centrifugal compressor impeller was calculated using the 3-dimensional Navier-Stokes solution method. A control volume method based on a rotating curvilinear coordinate system was used to solve the time-averaged Navier-Stokes equations, and a standard k-.epsilon. model was used to obtain eddy viscosity. Numerical results and experimental data were compared for the overall performance of the impeller, the pressure distributions along the shroud wall and the detailed flowfields at the design and off-design conditions, which showed good coincidence. The flow through the impeller is complex with the curvature of the streamlines and rotation. The development of secondary flows and the jet-wake flow characteristics, which is the main source of flow loss, was discussed. Calculation results show quite different patterns as the flow rate changes.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.37-43
• /
• 1997

광방사에너지에 의해 염료나 안료의 밀도가 감소하며, 밀도 변화는 색변화를 초래한다. 이 연구에서는 방사에너지에 의한 염료밀도의 변화와, 밀도변화에 따른 색변화에 대한 가정을 이용하여 방사에너지에 의한 색변화를 예측할 수 있는 관계식을 만들었다. 또한 실험을 통하여 식중의 손상계수를 산출하였다. 이 식과 계수와 적절성을 검증하기 위하여 시료들을 일반 광원을 변색시키면서 그 변색의 크기를 측정하고 계산치와 비교한 결과, 대부분의 시료에서 일치하는 것을 확인할 수 있었다. 또한 가시 방사대에서 분광 손상계수는 분광 흡수율과 밀접한 관계가 있음을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.558-560
• /
• 2004

Studies on the controlled switching method have been done to prevent the power system surges which cause the insulation deterioration and electro magnetic compatibility (EMC) problems during closing and opening of a circuit breaker. The controlled switching method controls the closing and tripping time in coincidence with the voltage or current to suppress switching surge. It is used to switch condenser bank, no load transformer, and shunt reactor. In this study, basic concept of the controlled switching is introduced, and also the test is performed to find parameters of the controlled switching in a 24kV vacuum circuit. And then, the control device hardware using TMS320C31 DSP has been designed and manufactured. It has been found that the application of IT technology to a circuit breaker is very effective to depress the switching surge.