• 한국주조공학회지
• /
• 제11권3호
• /
• pp.245-253
• /
• 1991

It is known that the analysis of thermal stresses is substantially important in optimal design of casting mould. In this paper unsteady state thermal stresses generated in ingot and mould during the solidification process are analyzed by the two dimensional thermal elasto-plastic analysis. Distribution of temperature and stress of the mould is calculated using the finite element method and compared with experimental result. The significant results obtained in this study are as follows. At the early stage of the casting process, abrupt temperature change was shown in the vicinity of the inner surface of the mould. The largest temperature gradient is occurred at the corner of the mould. In the thermal stress analysis, compressible stress occurred in the inside wall of the mould where as tensile stress on outside wall. Smaller thermal stress is observed at the rounded corner. It is also observed that the shown is influenced by the thickness of the wall. A fairly good coincidence is found between analytical and experimental results, showing that the proposed analytical methodology is reliable.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.311-319
• /
• 1999

In Korea accelerated industry development and urbanization during the last three decades have led serious water pollution problems in many parts of the nation. Especially in the regions of west and south coast have low fresh water in the dry season of spring and summer. In the place isolated from land it is important to secure the fresh water for drinking and general service. This study is concerned on the thermal system design to develop low-pressure evaporation type fresh water gen-erator of capacity 1 ton/day using the heat source of non-operating boiler in the season of spring and summer. The results obtained from this study are as follows. the water quantitieds generated from experi-mental evaporator showed good coincidence with the calculated values. The maximum production quantity was 1.38ton/day at pressure 40mmHg abs. and temperature $80^{\circ}C$.

• 대한전자공학회논문지
• /
• 제18권2호
• /
• pp.44-53
• /
• 1981

Stochastic feference를 가진 두개의 양자화 시스템을 분석하고 비교하였다. 양자화된 출력신호에 대하여 invariance 성격을 갖기 위한 조건이 서로 같다는 것이 보여졌다. Stochastic fererence 신호를 이용한 polarity coincidence 방법에 의한 상관관계 함수 추정이 여기서 구한 일반적 성질의 특수한 경우이다. 과거의 stochastic computing은 여기서 고려한 첫 번째 system으로부터 나오고 그리고 LG Robert가 이용한 특성은 두 번째 시스템의 일반적 성질의 특수한 경우를 이용했다는 것을 보였다.

• 소성∙가공
• /
• 제11권6호
• /
• pp.513-518
• /
• 2002

The equivalent boundary conditions have been applied to the front door panel forming process, in order to demonstrate its reliability and validity. The elongation in the bead forming process is applied to the binder wrap process as the equivalent displacement boundary condition and the restraining force in the drawing process is applied to stamping process as the equivalent force boundary condition. The result calculated with the equivalent boundary conditions shows closer coincidence with the experimental result than simulation with different boundary conditions. The numerical result fully demonstrates that drawbead forming simulation for calculation of equivalent boundary conditions is necessary and effective.

• 생약학회지
• /
• 제3권4호
• /
• pp.187-197
• /
• 1972

In spite of the fact that the system of oriental medicine still remains in the realm of 'unproven-method of treatment', no one can deny that the oriental medicine is a rich source of idea and motivation for the discovery of new drug from natural sources. However, non-scientific, mystic hypothetical system of oriental medicine refuses to be revealed scientifically. For the purpose of drawing useful parameters for inductive reasoning of the system, a new approach which comprises statistical analyses of prescription was attempted in this study. One hundred and thirty two ginseng-compounds prescription in 'Bang-Yak-Hap-Pyon', one of the most popular formularies of oriental medicine in Korea, were analysed by multivariate analysis technique. The results revealed ginseng from many points of view, e.g., therapeutic indications, dose, and compatibility, etc. Among these, the most striking coincidence with scientific achievements of modern pharmacology, is the fact that the oriental medicine has characterized ginseng already from remote ancient times as neither a specific curative nor an aphrodisiac, but a non-specific adaptogenic drug for general infirmity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2048-2051
• /
• 2010

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. In addition, HRA may be used to detect the human errors which may cause accidents or trace back to any mistake on the part of workers. Usually, HRA technique is used in association with other risk assessment techniques. Moreover, it can serve to enumerate the human errors which may occur during operation or down-time or correct the existing system to reduce the mistakes. This work focuses on the coincidence of human error and mechanical failure for management of human error, and on some important performance shaping factors to propose a method for improving safety effectively of the process industries.

• Tribology and Lubricants
• /
• 제28권6호
• /
• pp.272-277
• /
• 2012

Finite element analysis was carried out using wafer-scale and particle-scale models to understand the mechanism of the fast removal rate(edge effect) at wafer edges in the chemical-mechanical polishing process. This is the first to report that a particle-scale model can explain the edge effect well in terms of stress distribution and magnitude. The results also revealed that the mechanism could not be fully understood by using the wafer-scale model, which has been used in many previous studies. The wafer-scale model neither gives the stress magnitude that is sufficient to remove material nor indicates the coincidence between the stress distribution and the removal rate along a wafer surface.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (B)
• /
• pp.5-8
• /
• 2007

본 논문은 스파이크 뉴런의 응답 모델에 대하여 논의한다. 먼저, 스파이크 뉴런의 코딩 방법과 스파이크 기능에 대하여 논의하고, 커널 함수의 중첩(superposition)에 의한 스파이크 뉴런의 활동 전위 구성에 대하여 논의한다. 이 방법은 IF(Integrate-and-Fire) 뉴런 모델에서 사용하는 활동 전위 방정식보다 일반적인 것이라는 것을 설명하였다. 다음에 스파이크 출력의 기능으로서 우연성 동시 검출과 가중치 계산을 논의하고 뉴런 집단(population)의 스파이크 출력에 대하여 논의한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.322-327
• /
• 2003

In this study, the single notched specimen which was proposed the previous study was used to evaluate of the transverse tensile property of zircaloy cladding. The single notched specimen has notches which give stress intensity effect, so both FEM and experiment are needed for the same time. Take a coincidence of tensile behavior about both FEM and experiment, then obtain stress and strain from FEM only. The influence of notch was estimated by comparing the result of experimental, FEM. Then the relationship between stress-strain and displacement was evaluated.

• 대한핵의학회지
• /
• 제15권2호
• /
• pp.53-57
• /
• 1981

The estrogen and progesterone receptors which are bound to the cytoplasmic protein of cancer cells were measured in 20 patients with the early breast cancer by means of radioimmunoassay using charcoal. 1. The Patients with estrogen receptor positive were 13 (65%) of 20 cases and with progestrone receptor positive were 7 cases (35%) in the early breast cancer. 2. Coexistence of estrogen and progesterone receptor positive was noted in 7 cases (35%). The cases of estrogen receptor positive and progesterone receptor negative were 6 cases (33.3%), while there were no cases of estrogen receptor negative with progestrone receptor positive. 3. Coincidence of estrogen and progesterone negative was notied in 7 cases(35%). Conclusively, it is considered that the measurement of estrogen and progesterone receptors has relevance as predictive value, in the response to hormonal manipulations and chemotherapy for breast cancer patients.