• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.16-23
• /
• 2017

In contemporary modern society, people are constantly exposed to many kinds of noise, such as that from machinery, aircraft, construction sites, or road traffic. Noise is considered one of the most indispensable and influential parts of human life. This study investigates the acoustic characteristics of noise transfer from external sources to the human ear. For this study, we measured and analyzed various types of noise environments, installed monitoring speakers in a semi-anechoic room, and conducted intentional noise-filled experiments. In this environment, the size of the sounds generated by use of a portable device was also measured and the SNR (signal to noise ratio) calculated to study the influence of the noise. As sound is transmitted to the ear and the human body, it affects not only auditory damage but also other parts of the body. In this paper, we propose a proper SNR for noise emitted by portable IT equipment to prevent hearing loss when IT equipment is used.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.50-58
• /
• 2011

In this paper, potential distribution analysis through the six kinds of case studies examined in the environmental conditions change within a limited space, by the power supply system installed. To interpret the potential distribution using electromagnetic field analysis program and the parameters were state of the ground, the outer wall of the configuration state and the presence of human potential distribution was simulated. Potential distribution analysis, the size of nominal voltage, depending on the impedance of human body to be determined on the impact of surprise decision, but if equipped with appropriate protective equipment can be protected from lightning have been confirmed.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.81-89
• /
• 2005

A chair is a necessary tool in modern life and people spend a lot of time on it. But there Ere so many chairs which the human body size Is not considered that many users usually feel fatigue. The purpose of this study is to analyze the fundamental items human factors engineering which have to be applied to chairs and then to make user choose chairs, considering them as an index. The extent of this study is limited to chairs for office work used for sitting for a long time to work. We also profoundly analyze functional matters of chairs, user's posture and so on. We'll present all suitable factors and the assumed tentative plan by inferring items', the function chairs have coincides with the human body.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.35-45
• /
• 2013

The purposes of this study were to segment the women's plus-size market by the types of store patronage, profile the segments, and examine the differences in satisfaction with clothing attributes and variety of plus-size apparels according to different segments. The questionnaires included the 7-point likert scales on store patronage, satisfaction, clothing involvement and body cathexis. Five body measurements were recorded by sales people, and the respondents also provided information on their weight, height and garment size in addition to demographic characteristics. Questionnaires were collected from 7 franchise stores in Seoul, Anyang, Daegu, and Cheonan during the months of February, 2011 to April, 2011. 210 questionnaires were distributed and 160 were returned. Excluding incomplete questionnaires, a total of 149 questionnaires were used in the final analysis. The cluster analysis based on store patronage identified four segments- major patrons of specialty stores, multi-channel users, regular store users, and internet shopping mall users. Significant differences were found among the four segments of women's plus-size consumers in terms of clothing involvement, age, occupation, education and clothing expenditures. Internet shopping mall user group were in overall less satisfied with several clothing attributes and variety compared to other groups.

• Communications of the Korean Mathematical Society
• /
• v.16 no.3
• /
• pp.459-485
• /
• 2001

The aim of EIT (electrical impedance tomography) system is to image cross-section conductivity distribution of a human body by means of both generating and sensing electrodes attached on to the surface of the body, where currents are injected and voltages are measured. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. With a limited set of current-to-voltage data, figuring out full structure of the conductivity distribution could be extremely difficult at present time, so it could be worthwhile to extract some necessary partial information of the internal conductivity. We try to extract some key patterns of current-to-voltage data that furnish some core information on the conductivity distribution such s location and size. This overview provides our recent observation on the location search and the size estimation.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.2
• /
• pp.69-76
• /
• 1984

In order to obtain high proportion of Y sperm the semen was laid over 6%,10% and 20% bovine serum albumin. Separated sperm were stained with quinacrine mustard in order to see F - body which could be seen in human Y sperm. But we could'nt find F-body in the bull sperm. So sperm were compared with size of sperm head. As a result of observation separated sperm was small in size of length and width of sperm head as compared with control sperm. So it was found that the proportion of Y sperm showed a marked increase in separated layer. Then the higher albumin density was, the higher the proportion of Y sperm which had smaller head and faster motility was. But the higher albumin density was, the lower the recovery rate of sperm was. So it was hard to separate Y sperm in oligospermia.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.329-331
• /
• 2021

Recently, as various cases of using deep learning in the health-care field are increasing, functions such as electrocardiogram examination and body composition analysis through wearable device can be provided to provide rational decision-making and a process tailored to the individual. In order to utilize deep learning, it it most important to secure refined data, and this data is being made through human intervention or unsupervised learning. In this paper, we propose a model that conducts unsupervised learning by clusters according to gender and age using human body data such as chest and waist circumferences, which are easy to measure, and classifies them with CNN. For data, the 7th human body data provided by Korean Agency for Technology and Standards was used. Through this, it it thought that it can be applied to various application cases such as personalized body shape management service and obesity analysis.

• Korean Journal of Human Ecology
• /
• v.14 no.1
• /
• pp.107-117
• /
• 2005

The purpose of this study is to develop the size and grading increments chart for the middle-aged obese women compared with normal women in middle age. Seven hundred and thirty three women's data from the 4th National Korean Size Survey for Standardization (1997) were analyzed. It was found that size increment of bust and hip girth of obese women was different from that of ordinary middle-aged women. The rate of coverage for a certain set of size specification and the grading increment value for the clothing of Korean obese women in middle aged group were also suggested. The relative percentage value of grading rule based on the change in bust girth increment of Korean obese women was quite different from that of American women. In conclusion, it was noted that the characteristics of the body size specification of obese women was quite different from those of the corresponding age group, so that the separated size specification and grading rule are needed to be used in the manufacturing process of obese women's clothing.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.226-236
• /
• 2021

The purpose of this study was to classify the torso shape based on abdominal protrusion caused by changes in the physical characteristics of middle-aged women. This study analyzed 3D shape data of 401 females ranging in age from 40 to 59 years who participated in the 6th Size Korea project. Based on the Size Korea 3D measurement standard, 27 additional items such as height, protrusion, and angle were measured in the 3D scan data. Nine factors were extracted from the analysis of constituent factors of the torso: "vertical size of torso," "flatness and protrusion of abdomen," "torso front extrusion," "upper body height," "bust size and flatness," "size of belly and angle of lower abdomen," "hip length," "hip flatness," and "horizontal size of bust." As a result of the cluster analysis using these nine factors, the torsos of middle-aged women were classified into three types. Type 1 has upper abdominal deposition with a small and long upper body and an advanced abdomen; type 2 has lower abdominal deposition with a small and short torso and a small belly and hip flexion; and type 3 has central abdominal deposition with a big and long torso, large breasts, and protruding abdo¬men front. The middle-aged women were mostly distributed in Type 2. The above results will be useful as basic data for the development of clothing with improved fit to accommodate the changed physical characteristics of middle-aged women.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.1-10
• /
• 2002

A web based virtual try-on provides customers a more enjoyable shopping experience that visualize clothes on personal mannequin. The researchers compared virtual fitting models which were developed in 2000 at Korea and in 2000 and 2002 at U.S. The results of this study as follows: The information about user's body size was required to input for selection of a virtual fitting model. 7 to 19 different body size, shape, and face features including weight and height were needed for visualizing virtual fitting model. The body type of the U.S virtual fitting model(My virtual model) was selected by front view silhouette for women, and by shoulder width and midriff silhouette for men. The more detailed information was required for developing Korean virtual fitting model. The additional body size information required in the site were leg and arm lengths, waist length, and thigh and ankle circumferences. The body proportion of Korean cyber personal mannequin was longer and narrower than the U.S cyber personal mannequin. It was recommended that standardized body length, width, and depth proportions calculated from national anthropometric data must be applied for developing Korean virtual fitting model. With application of more detailed information on face feature and advanced graphic image technology the 'My virtual model in 2002 resembled the human body shape of various race.