• Child Health Nursing Research
• /
• 제9권1호
• /
• pp.74-84
• /
• 2003

This study was designed to investigate effects of maternal education using Brazelton Neonatal Behavioral Assessment Scale(the following will be marked as NBAS) on the mother-infant interaction and infant behavior. The subjects of this study consisted of 48 pairs of normal mother and infant, 24 pairs for intervention group and 24 pairs for control group. The subjects were recruited from two general hospitals, and an OBGY clinic located in J city. The data were collected from July 30, 2001 to October 6, 2001. Prior to investigation and data collection, following operational hypotheses were set up in order to compare the investigative data against these operational hypotheses(H). H1: Intervention group will higher mother-infant interaction score than control group. H2: Intervention group infants will higher overall performance in infant behavior test score than control group infants. The results of this study were summarized as follows: 1. The mother-infant interaction score was 59.79 points in intervention group and 53.91 points in control group. The mother-infant interaction score of intervention group showed significant difference than control group. Therefore, hypothesis 1 was supported. 2. The infant behavior score of intervention group was significantly higher than control group, but partially. Therefore, hypothesis 2 was partially supported. 1) The social interaction(orientation) score was 46.58 points in intervention group and 43.50 points in control group. The orientation score of intervention group showed significant difference than control group. 2) The state regulation score was 26.79 points in intervention group and 25.33 points in control group. The state regulation score of intervention group showed significant difference than control group. In conclusion, present work demonstrated that maternal education using NBAS is an effective intervention method for promotion of mother-infant interaction and of infant behavior development. Author believes that many inexperience young mother may find NBAS-based maternal education beneficial for their nursing babies, therefore NBAS-based intervention is recommended to be adopted routinely as an integral part of neonatal nursing strategies.

• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1303-1314
• /
• 2016

This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 timeframe. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical $CO_2$ cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.543-550
• /
• 2014

In many industrial processes and operations, such as power plants, petrochemical industries and ships, shell and tube heat exchangers are widely used and probably applicable for a wide range of operating temperatures. The main purpose of a heat exchanger is to transfer heat between two or more medium with temperature differences. Heat exchangers are highly nonlinear, time-varying and show time lag behavior during operation. The temperature control of such processes has been challenging for control engineers and a variety of forms of PID controllers have been proposed to guarantee better performance. In this paper, a scheme to control the outlet temperature of a shell and tube heat exchanger system that combines the PID controller with feedforward control and anti-windup techniques is presented. A genetic algorithm is used to tune the parameters of the PID controller with anti-windup and the feedforward controller by minimizing the IAE (Integral of Absolute Error). Simulation works are performed to study the performance of the proposed method when applied to the process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.323-323
• /
• 2013

High power light-emitting diodes (LEDs) are widely used in many device applications due to its ability to operate at high power and produce high luminance. However, releasing the heat accumulated in the device during operating time is a serious problem that needs to be resolved to ensure high optical efficiency. Ceramic or Aluminium base metal printed circuit boards are generally used as integral parts of communication and power devices due to its outstanding thermal dissipation capabilities as heat sink or heat spreader. We investigated the characterisation of electroless plating of Ni-B film according to plating bath temperature, ranging from $50^{\circ}C$ to $75^{\circ}C$ on Ag paste/anodised Al ($Al_2O_3$)/Al substrate to be used in metal PCB for high power LED packing systems. X-ray diffraction (XRD), Field-Emission Scanning Electron Microscopy (FE-SEM) and X-ray Photoelectron Spectroscopy (XPS) were used in the film analysis. By XRD result, the structure of the as deposited Ni-B film was amorphous irrespective of bath temperature. The activation energy of electroless Ni-B plating was 59.78 kJ/mol at the temperature region of $50{\sim}75^{\circ}C$. In addition, the Ni-B film grew selectively on the patterned Ag paste surface.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1706-1713
• /
• 2020

Functionally gradient material (FGM) is promisingly effective in mitigating the thermal stress between plasma facing materials (PFM) and structural materials. However, the corresponding research with respect to W/V FGM has not been reported yet. In this work, we firstly report the successful fabrication of W/V FGM by a combined technology of mechanical alloying (MA) and spark plasma sintering (SPS). The microhardness and microstructure of the consolidated sample were both investigated. W/V stacks show significantly enhanced microhardness (>100%) compared with pure W plate, which is beneficial to the integral strength of the hybrid structure. Furthermore, we clarify that the different ductility of W and V should be carefully considered, otherwise W/V powder might aggregate and lead to the formation of compositional segregation, and simultaneously unmask the impact of V proportion on the distribution of second phase in W-V binary alloy system. This work provides an innovative approach for obtaining W-V connections with much better performance.

• 제어로봇시스템학회논문지
• /
• 제18권6호
• /
• pp.546-554
• /
• 2012

This paper suggests a design method of an improved phase control loop for tracking resonant frequency of solid type precision resonant gyroscope. In general, a low cost MEMS gyroscope adapts the automatic gain control loops by taking a velocity feedback configuration. This control technique for controlling the resonance amplitude shows a stable performance. But in terms of resonant frequency tracking, this technique shows an unreliable performance due to phase errors because the AGC method cannot provide an active phase control capability. For the resonance control loop design of a solid type precision resonant gyroscope, this paper presents a phase domain control loop based on linear PLL (Phase Locked Loop). In particular, phase control loop is exploited using a higher order PLL loop filter by extending the first order active PI (Proportion-Integral) filter. For the verification of the proposed loop design, a hemispherical resonant gyroscope is considered. Numerical simulation result demonstrates that the control loop shows a robust performance against initial resonant frequency gap between resonator and voltage control oscillator. Also it is verified that the designed loop achieves a stable oscillation even under the initial frequency gap condition of about 25 Hz, which amounts to about 1% of the natural frequency of a conventional resonant gyroscope.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1553-1558
• /
• 2009

A series of Eu(III) complexes with various neutral ligands (2,2’:6’,2"-terpyridine (T), diglyme (D), 1N-(2-dimethylamino) ethyl)-1N, 2N, 2N-trimethylethane-1,2-diamine (PT), di-(2-picolyl)-amine derivative (HT), and multidentate terpyridine derivative (DT)) were synthesized to investigate the effect of coordination environment on the sensitized luminescence of Eu(III) complexes. The nine coordination sites of the $Eu^{3+}$ ion are occupied by three bidentate carboxylate moieties and one neutral ligand. The highest emission intensity is obtained for $Eu^{3+}$- $[NA]_3$ (PT), due to the difference in energy transfer efficiency and symmetry of the first coordination sphere of $Eu^{3+}$ ion. But, the lowest emission intensity is obtained for $Eu^{3+}$-$[NA]_3$(T). Terpyridine may not play an important role antenna for photosensitizing $Eu^{3+}$ ion. It could be attributed to the weak spectral overlap integral J value between its phosphorescence band and $Eu^{3+}$ion absorption band. Therefore, different coordination environment of $Ln^{3+}$ ion play an important role in providing sensitization of lanthanide ion emission.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권1호
• /
• pp.29-36
• /
• 2023

To have highly reliable diagnostic performance of it, this study comparatively analyzed spatial resolution of SPECT images and interrelationship depending on the changes of system uniformity of ga㎜a camera through phantom analysis. This study chose 6 kinds of results from quality control (uniformity) of triple head SPECT scanner operated in an university hospital in Seoul for six months. Then, study measured spatial resolutions (FWHM) of the images restructured by injecting radiopharmaceuticals to Jaszczak phantom, and doing SPECT scanning under the same conditions as clinical ones using the analytical program (image J). Quality controls performed by the experimental institution showed that differential uniformity of UFOV ranged from 2.76% to 7.61% (4.46±2.07), and integral uniformity of UFOV ranged from 1.98% to 5.42% (3.01±1.43). Meanwhile, Quantitative analysis evaluations of phantom images depending on the changes of uniformity of SPECT scanner detector showed that as the uniformity values of UFOV and CFOV decreased, FWHM values of phantom images decreased from 8.5 ㎜ to 5.8 ㎜. That is, it was quantitatively identified that the higher uniformity of detector is, the better spatial resolution of images gets (P<0.05). It is very important to perform continuous and consistent quality control of the nuclear medicinal system, and users should be clearly conscious of it.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1214-1218
• /
• 2005

As demands for precision parts are increased, existing methods to fabricate them such as MEMS, LIGA technology have the technical limitations like high precision, high functionality and ultra miniaturization. A micro-stereolithography technology based on $DMD^{TM}$(Digital Micromirror Device) can meet these demands. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D part is fabricated by stacking layers that are sliced as 2D section from STL file. Whereas in conventional method, the resin surface is cured as scanning laser beam spot according to the section shape, but in this research, we use integral process which enables to cure the resin surface at one time. In this paper, we deal with the dynamic pattern generation and $DMD^{TM}$ operation to fabricate micro structures. Firstly, we address effective slicing method of STL file, conversion to bitmap, and dynamic pattern generation. Secondly, we suggest $DMD^{TM}$ operation and optimal support manufacturing for $DMD^{TM}$ mounting. Thirdly, we examine the problems on continuous stacking layers, and their improvements in software aspects.

• Journal of Genetic Medicine
• /
• 제5권2호
• /
• pp.89-93
• /
• 2008

"Personalized medicine," the goal of which is to provide better clinical care by applying patient's own genomic information to their health care is a global challenge for the $21^{st}$ century "genomic era." This is especially true in Korea, where provisions for clinical genetic services are inadequate for the existing demand, let alone future demands. Genomics-based knowledge and tools make it possible to approach each patient as a unique biological individual, which has led to a paradigm-shift in medical practice, giving it more of a predictive focus as compared with current treatment oriented approach. With recent advancements in genomics, many genetic tests, such as susceptibility genetic tests, have been developed for both rare single gene diseases and more common multifactorial diseases. Indeed, genetic tests for presymtomatic individuals and genetic tests for drug response have become widely available, and personalized medicine will face the challenge of assisting patients who use such tests to make appropriate and wise use of genetic risk assessment. A major challenge of genomic medicine lies in understanding and communicating disease risk in order to facilitate and support patients and their families in making informed decisions. Establishment of a health care system with provisions for genetic counseling as an integral part of health care service, in addition to genomic literacy of health care providers, is vital to meet this growing challenge. Realization of the promise of personalized medicine in the era of genomics for improvement of health care is dependent on further development of next generation sequencing technology and affordable sequencing test costs. Also necessary will be policy development concerning the ethical, legal and social issues of genomic medicine and an educated and ready medical community with clinical practice guidelines for genetic counseling and genetic testing.