• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.793-798
• /
• 2010

In this paper we propose a low-power walking compensation method for biped robot based on consumption energy analysis. Firstly, basic walking motions that can reduce energy consumption of robot movements are implemented based on consumption energy analysis according to robot axes. We define knee bent motion as a basic walking motion. It can improve energy consumption and motion stability by lowering center of gravity of the biped robot. We analyze consumption energy of left and right leg of the robot using motor currents and propose a compensation method of walking motions to reduce unbalance of consumption energy between left leg and right leg. It can also improve energy consumption and walking stability of the robot. The proposed low-power compensation method based on consumption energy analysis is verified by walking experiments of a small biped robot with an embedded system.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.8-27
• /
• 2002

In this study, the load analysis of a composite canard aircraft is performed numerically. Excel visual basic program for PC is used to calculate aerodynamic coefficients, loads and moments etc.. The basic data required for the load analysis such as aircraft configuration and dimension, parts and its weight and coordinate etc. are obtained from Catia modeling, measurement or material density. Aircraft weight, center of gravity, inertia moment, structural design speeds, wing load distribution, forces and moments are evaluated by using these data. V-n diagram is also represented for selecting critical loads applied to the wing and fuselage. The V-n diagram is investigated to decide the flight envelope of canard aircraft for design speed VA, VC, VD and load factor +3.8G, -1.52G at maximum weight of 2,573 lbs and sea level. In the future, the results of the wing and fuselage load analysis is to represented by using selected critical loads.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.2
• /
• pp.133-139
• /
• 2016

An electric wheelchair is a assistive device to maneuver on the ground. Tip-over of an electric wheelchair is increasing every year. Dynamic stability metric test item in KS P 7176 has not ensured safety of electric wheelchair on the slope. This study presents design the foldable electric wheelchair that can load in the car and analysis of tip-over measurement which is easily computed for electric wheelchair. Wheelchair frame is designed with a four-bar link mechanism for a foldable structure, and seat module, battery and power driving module can be separated. This analysis is performed during a maneuver on the ground by force-moment stability metric. Several elements, center of gravity position, rotational radius and acceleration, were evaluated how to affect stability metric. This stability metric can reduce tip-over of wheelchair and provide a clue to make of dynamic stability test item.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.370-380
• /
• 2016

The black pine logs damaged by pine wilt disease in Jeju-do were heat-treated to extend the utilization of domestic trees damaged by pine wilt disease. The heat-treatment of wood requires wood to be heated to $56^{\circ}C$ for 30 min at the core. The average moisture content and top-diameter of the black pine logs were ranged from 46% to 141% and from 180 mm to 500 mm, respectively. And the basic specific gravity and oven-dry specific gravity of the black pine logs were 0.47 and 0.52, respectively. The time required for heat-treatment at $105^{\circ}C$ temperature was ranged from 7.7 h to 44.2 h, depending on moisture content and top-diameter. The temperature distribution was used to predict the time required for heat-treatment of black pine log with various moisture contents and top-diameters using finite difference method. The thermal properties of wood including the thermal conductivity and specific heat in accordance with moisture content were calculated. Heat transfer coefficient for mixed convection in form of adding natural convection and forced convection was used for heat transfer analysis. The error between the measured and predicted values ranged from 3% to 45%. The predicted times required for heat-treatment of black pine log with 50% moisture content and 200 mm, 300 mm, and 400 mm top-diameter were 10.9 h, 18.3 h, and 27.0 h, respectively. If the initial moisture content of black pine log is 75%, heat treatment times of 13.6 h, 22.5 h, and 32.8 h were predicted in accordance with top-diameter. And if the initial moisture content of black pine log is 100%, heat treatment times of 16.2 h, 26.5 h, and 38.2 h were predicted in accordance with top-diameter. When the physical properties of logs damaged by pine wilt disease are presented, these results can be applicable to the heat-treatment of red pine and Korean pine logs as well.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.237-257
• /
• 2005

It was to study as a following-research of "A Case Study on Center of Gravity(COG) Analysis when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[I]". The purpose of this study was to analyze the COG variables when performing uchimata(inner thigh reaping throw) by two postures and voluntary resistance levels(VRL) of uke(reciver) in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games Olympian(silver medalist), and one male trainee; Y.I.University representative member (SDK), and were filmed on two S-VHS 16mm video cameras(60fields/sec.) through 3-dimensional motion analysis methods, that postures of uke were shizenhontai (straight natural posture) and jigohontai(straight defensive posture), VRL of uke were 0% and 100%, respectively. The kinematical variable was COG variable, distance of COG, and distance of resultant COG between uke and tori(the thrower), velocity and acceleration of COG. The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing uchinmata according to each posture and VRL of uke and classifying. From the data analysis and discussion, the conclusions were as follows : 1. Displacement of COG Subject YH, COG was the highest in kuzushi(balance -breaking), vertical COG was low when following in tsukuri(positioning; set-up), kake(application; execution), and COG was pattern of same character each postures and resistance, respectively. Subject SDK, COG was low from kumikata(engagement positioning) to kake, and COG was that each postures and resistance were same patterns, respectively. Subject YH, SDK, each individual, postures and resistance, vertical COG was the lowest in kake phase, when performing. 2. Distance of COG between uke and tori The distance of COG between uke and tori when performing, subject YH was $0.64{\sim}0.70cm$ in kumikata, $0.19{\sim}0.28cm$ in kake, and SDK was $0.68{\sim}0.72cm$ in kumikata, $0.30{\sim}0.42\;cm$ in kake. SDK was wider than YH. 3. Distance of resultant COG between uke and tori The distance of resultant COG between uke and tori when performing, subject YH was $0.27{\sim}0.73cm$ from kumikata to kake. and SDK was $0.14{\sim}0.34cm$ in kumikata, $0.28{\sim}0.65cm$ in kake. Jigohontai(YH:$0.43{\sim}0.73cm$,SDK:$0.59{\sim}0.65cm$) was more moved than shizenhontai(YH:$0.27{\sim}0.53cm$, SDK: $0.28{\sim}\;0.34cm$). 4. Velocity of COG The velocity of COG when performing uchimata, subject YH was fast anterior-posterior direction in kuzushi, ant.-post. and vertical direction fast in tsukuri and kake. SDK was lateral, ant.-post. and vertical direction in kuzushi, ant.-post. and vertical direction in tsukuri and ant.-post. direction in take, respectively. 5. Acceleration of COG The acceleration of COG when performing uchimata, The trend of subject YH was showed fast vertical direction in kuzushi and tsukuri, ant.-post. and vertical direction fast in kake. The trends of SDK showed lateral direction in kuzushi, lateral and ant.-post. direction in tsukuri and ant.-post. direction in kake, respectively.

• Journal of KIISE:Software and Applications
• /
• v.30 no.5_6
• /
• pp.444-453
• /
• 2003

Recently, a great interest of bio-technology(BT) is concentrated and the image analysis technique for electrophoresis gels is highly requested to analyze genetic information or to look for some new bio-activation materials. For this purpose, the location and quantity of each band in a lane should be measured. In most of existing techniques, the approach of peak searching in a profile of a lane is used. But this peak is improper as the representative of a band, because its location does not correspond to that of the brightest pixel or the center of gravity. Also, it is improper to measure band quantity in most of these approaches because various enhancement processes are commonly applied to original images to extract peaks easily. In this paper, we adopt an approach to measure accumulated brightness as a band quantity in each band region, which Is extracted by not using any process of changing relative brightness, and the gravity center of the region is calculated as a band location. Actually, we first extract lanes with an entropy-based threshold calculated on a gel-image histogram. And then, three other methods are proposed and applied to extract bands. In the MER method, peaks and valleys are searched on a vertical search line by which each lane is bisected. And the minimum enclosing rectangle of each band is set between successive two valleys. On the other hand, in the RG-1 method, each band is extracted by using region growing with a peak as a seed, separating overlapped neighbor bands. In the RG-2 method, peaks and valleys are searched on two vertical lines by which each lane is trisected, and the left and right peaks nay be paired up if they seem to belong to the same band, and then each band region is grown up with a peak or both peaks if exist. To compare above three methods, we have measured the location and amount of bands. As a result, the average errors in band location of MER, RG-1, and RG-2 were 6%, 3%, and 1%, respectively, when the lane length is normalized to a unit value. And the average errors in band amount were 8%, 5%, and 2%, respectively, when the sum of band amount is normalized to a unit value. In conclusion, RG-2 was shown to be more reliable in the accuracy of measuring the location and amount of bands.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.235-248
• /
• 2010

To construct the standard methods for evaluation of physicochemical characteristics of tailings in Korea, specific gravity, paste pH, grain size, mineral compositions and heavy metal concentrations of total 26 tailings from 21 metallic mines were analyzed. Specific gravity of tailings ranged from 2.61 to 4.31 (avg. 3.04), and sand and silt grain were dominant in the tailings. Ranges of paste pH were 2.1-9.5 in tailings (7.1-9.2 at magmatic, skarn and hydrothermal replacement deposits and 2.1-9.5 at hydrothermal vein deposits). Additionally, hydrothermal vein deposits could be reclassified into three categories: (1) paste pH>7.0, (2) 4.0

• Physical Therapy Korea
• /
• v.10 no.4
• /
• pp.85-94
• /
• 2003

본 연구에서는 근골격계 통증이 자세유지와 균형능력에 핵심이 되는 중력중심 이동에 미치는 영향에 대해 알아봄으로서, 균형과 자세에 영향을 주는 다양한 요소들에 대한 새로운 접근을 시도해 보고자 한다. I-병원의 입원 및 외래 환자 중 신경계 손상이 없고 중력중심 이동에 직접적인 영향을 줄 수 있는 하지에 정형외과적 장애가 없으며, 전정계 손상이나 시력장애로 인한 균형에 문제가 없이 근골격계 질환으로 요통과 견통을 주소로 하는 71명의 환자(남자 38, 여자 33; 평균연령=44, 표준편차=13.8, 범위=19~79)와 신경계, 근골격계 및 평형감각에 문제가 없는 정상인 30명의 대조군(남자 16, 여자 14; 평균연령=39.2, 표준편차=13.7, 범위=21~72)을 대상으로 전산화된 힘판을 이용하여 중력중심 이동의 궤적을 표준편차값으로 측정하였다. 측정된 중력중심 이동값은 두 군간에 상이한 차이를 보이고 있음이 검증되었다(p<.01). 또 측정된 여러 변수들의 중력중심 이동에 대한 영향력을 알아보기 위해 나이, 체중 및 신장과 중력중심 이동과의 상관분석 결과 중력중심 이동의 15.8%를 체중의 변화에 의한 것으로 설명할 수 있다는 결과를 얻었으며, 그 외의 변수들과의 연관성에 대해선 유의미한 차이가 없었다(p<.01). 결과적으로 근골격계 통증은 올바른 자세유지와 균형유지를 위한 감각통합과 반응과정에 직접, 간접적으로 영향을 미치고 있다. 따라서 중력 중심 이동이 크면 클수록 중심을 잡기 위한 근육활동으로 추가적인 에너지가 사용되고, 편중된 중력중심 이동은 근골격계에 무리한 부담을 주어 통증을 증가시킬 수 있을 것이다. 또 통증으로 인한 중력중심 이동은 이를 보상하기 위해 신체 먼 곳에서의 이차적인 변형을 초래하여 각종 근골격계 증상의 원인이 될 수 있으므로 근골격계에 대한 적절한 치료는 통증을 감소시켜 자세의 이차적인 변형을 막고 자세유지 시 작용하는 근육의 에너지 효율을 높일 수 있을 것으로 사료된다.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.322-330
• /
• 2007

Because 6sigma is doing innovative success In management whole, estimate that can exert direct effect in interior Design management. Therefore, this study did by purpose that 6sigma that is scientific method that do customers satisfaction by ultimate purpose acts as basic study that can heighten practical use Possibility and result of interior Design management and value by interior design standardization process. Need to use marketing data that is scientific design component at schematic design step for successful interior design that can improve result. Hereupon, this study is doing to big dimension that utilizes 6sigma and makes standard process of only Interior Design, and did to dimension that present study phase verifies if '6sigma' is practical use possibility by intoner design process. Did by method that verification method of 6sigma practical use possibility analyzes "Information transmission efficiency improvement of department store display space" 6sigma project example. When see that example project is analyzed on Improvement constituent that "Design improvement" out of Vital few Xs of statistical analysis item must heighten the customers satisfaction rate conclusively, target process might be established because design becomes center of gravity if did design improvement very first time. Finally, possibility that 6sigma can utilize in process of interior design is verified, and it is scientific methodology that can utilize to all business members that there are not any special category of business even if is in practical use. Such scientific 6sigma method need persistent study that make standard process analyzing a lot of problems that is expected to be beaconed and happens substantially in here after to management development of interior design.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.19-22
• /
• 2019

상완동맥은 어깨에서부터 팔꿈치까지 내려오는 상완골의 내측부에 존재하며 혈압을 측정할 때 사용되는 혈관이다. 이 혈관은 골절로 인해 찢어지거나, 또는 혈액순환에 문제가 생겨 혈관이 막히는 경우가 발생한다. 이러한 경우 혈관의 상태를 확인하기 위하여 색조 도플러 초음파 검사를 사용하지만, 사용자에 따라 영상을 통한 판단 기준이 다르다는 문제점이 발생한다. 따라서 본 논문에서는 FCM과 Fuzzy Decision Tree를 이용한 영상 처리를 통해 일관성 있는 판단기준을 세우기 위한 혈류의 속도를 제안한다. 색조 도플러 초음파 영상에서의 상완 동맥을 추출하여 기울기를 이용한 FCM 알고리즘을 통해 소속도를 추출한 뒤 퍼지 룰에 적용하여 의사 결정 트리로 등급을 분류하고 결과적으로 혈류 속도를 추출한다. 색조 도플러 초음파 영상에서 환자의 개인 정보를 보호하기 위해 개인 정보 영역을 제거하여 ROI 영역을 추출하고 ROI 영역을 이진화를 통하여 상완동맥이 있는 영역을 추출한다. 이진화 된 ROI 영역에서 혈관 영상의 혈류 방향으로의 무게중심을 설정하고 각각의 픽셀과 무게중심 선과의 거리를 이용하여 소속도를 추출한 후 FCM을 사용하여 최적의 기울기를 선정한다. FCM을 통해 추출한 최종 소속도를 이용하여 퍼지 룰에 적용한 뒤 계산된 T-norm과 소속도의 분산을 이용하여 의사 결정 트리를 형성 트리의 단말 노드들은 각 픽셀을 분류한다. 분류되어진 데이터들의 노드별 소속도 평균을 구한 뒤 디퍼지화를 통해 COG(Center of Gravity)를 계산한다. 마지막으로 그 값을 이용하여 혈류 속도에 영향을 미치는 정도를 계산한 뒤 최종 혈류의 속도를 제안한다.