• 한국운동역학회지
• /
• 제17권2호
• /
• pp.23-29
• /
• 2007

The purpose of this study was to examine if there are kinematic variables differences between national representative players (NRP) and non national representative players (NNRP) during 500 m inline skate starting motion. Four NRP and six NNRP were recruited for the study. Each subject executed starting motion five times on a $2{\times}12m$ start way in a gymnasium. Kinematic variables were analyzed by the three-dimensional motion analysis system (60Hz). It was hypothesized that there are difference in elapsed time and center of mass acceleration in starting phase between groups since starting phase has been considered important in sprinting. The results showed that the NRP had significantly shorter starting phase time than that of NNRP. 1) An elapsed time in phase P1 of NRP was shorter than that of NNRP, and excellent players have early started their first stroke. 2) Both NRP and NNRP have started at the same spot, and displacement of the center of gravity in starting posture of NRP group was at the front compared to NNRP group. 3) Average step lengths of NRP were longer than those of NNRP, and a step change of NRP was stabler compared to that of NNRP. 4) In a speed change of the center of gravity NRP showed comparatively high speed from P1 to P4.

• 한국산업정보학회논문지
• /
• 제17권3호
• /
• pp.51-57
• /
• 2012

팩맨(Pacman)은 세계적으로 사랑을 받는 클래식 게임의 종결자로 알려져 있다. 본 논문에서는 클래식 게임인 팩맨을 키보드나 마우스를 사용하지 않고 간단한 손동작만으로 게임을 플레이 할 수 있도록 한다. 즉, 손의 좌표 중심점을 이용하여 방향키를 대신할 수 있도록 한 모션을 이용한 게임이다. 또한 캠을 이용하여 MFC 다이얼로그에 영상을 받아 손에 대한 포인터를 추출하여 손의 움직임에 따라 몬스터의 움직임도 바뀌도록 한다. 본 논문에서 피부색 추출을 위해 RGB 영상을 YCbCbr영상으로 변환하고, 보다 좋은 영상을 얻기 위하여 곱 연산과 하이브리드 미디언 필터링을 이용하였다. 그리고 손 영역의 무게 중심을 구하여 이를 중심으로 손 영역의 움직임을 구하는 방법을 사용하였다.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.469-475
• /
• 2016

In this work, casting processes, such as filling and solidification, were simulated in order to accurately predict volume shrinkage defects in large-sized sand gravity casting. Turbulent flow of melted materials and a difference of solidification speed can cause volume shrinkage defects. In order to solve this problem and to understand the phenomenon, a porous filter application was studied. Two different porosities of 10 and 20 p.p.i filters were introduced into the gating system, and in view of the results so far achieved, the defect was dramatically reduced by 22%, compared to that without the use of the filter.

• 해양환경안전학회지
• /
• 제22권7호
• /
• pp.892-899
• /
• 2016

본 연구에서는 세굴된 해저 파이프 주위 중력류의 유동 해석을 수행하였다. 결과 비교를 위해 세굴이 아닌 평평한 해저면 위에 틈새 거리를 두고 설치된 해저 파이프 문제를 함께 고려하였다. 여기서 세굴의 깊이와 틈새 거리는 동일하며, 평평한 해저면 위에 설치된 파이프 문제는 일반적으로 실제 세굴효과를 이상적으로 구현하기 위해 주로 고려된다. 중력류와 해저 파이프 상호작용에 대한 유동특성의 이해를 위해 농도 및 와도장, 압력장 그리고 양항력 계수 등, 다양한 물리량들을 비교 및 분석 하였다. 결과적으로 세굴과 평평한 해저면 위에 설치된 해저 파이프 주위 유동특성이 달라짐을 관찰하였다, 특히 세굴의 위 파이프의 경우 구조물 상부에서 발달된 음의 와만 하류로 나아가게 되지만 평탄면 위 파이프는 이열 와구조 형태를 가지는 것을 확인하였다. 따라서 중력류에 놓인 해저 파이프의 안전 설계를 위해서는 무엇보다 실제 세굴조건을 고려하는 것이 중요 할 것으로 판단된다.

• 한국광학회지
• /
• 제17권5호
• /
• pp.383-390
• /
• 2006

Shack-Hartmann 파면측정 센서는 적응광학 분야에서 파면측정용으로 가장 널리 사용되고 있다. Shack-Hartmann 센서에서 파면측정 알고리즘은 크게 점영상의 중심점 탐색 알고리즘과 파면복원 알고리즘으로 나눌 수 있다. 이 중 점영상의 중심점 탐색은 파면측정 결과에 크게 영향을 미치나 많은 연구결과에도 불구하고 최적의 중심점 측정 알고리즘 및 내부 변수 설정에 대한 일반적인 해결책은 아직 제시되지 못하고 있다. 현재, 중심점 탐색 알고리즘으로는 무게중심법(center of gravity)이 가장 널리 사용되고 있다. 본 연구에서는 중심점 탐색 알고리즘에 의한 측정 정확도 분석을 위해 무게중심법과 상관관계법(correlation)을 함께 고려하였다. 이를 위해 Shack-Hartmann 센서의 파면측정 과정을 전산모사하였고, 이로부터 중심점 탐색 알고리즘과 관련하여 무게중심법 및 상관관계법에서의 노이즈 특성을 비교, 분석하였다. 또한, 무게중심법에서 문턱값(threshold value)의 설정에 따른 파면측정의 정확도에 대한 분석을 통하여 노이즈 제거를 위한 최적의 문턱값을 제안하였다. 이와 더불어 Shack-Hartmann 센서 시스템을 구성하여 디포커스(defocus)를 발생시키고 이를 측정하는 실험을 수행함으로써 파면측정 알고리즘 및 전산모사 결과를 검증하였다.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.591-600
• /
• 2024

This study investigated the acceleration response and shape change characteristics of a gravity quay wall according to the magnitude of the applied acceleration. The quay wall was defined as a port facility damaged by the Kobe earthquake. Four experimental scenarios were established based on the inclination condition grades, considered to be a significant defect factor in the quay wall. Then, the shaking table test was conducted using scaled-down quay wall models constructed per each scenario. The ground acceleration was gradually increased from the peak ground acceleration (PGA) of 0.1 g to 0.7 g. After each ground acceleration test, acceleration installed on the wall and backfill ground and inclination on the top of the wall were measured to assess the amplification of peak response acceleration and maximum response amplitude and the change in the inclination of the quay wall. This study also analyzed the separation of the quay wall from the backfill and the crack pattern of the backfill ground according to PGA values and inclination condition grades. The result of this study shows that response acceleration could provide a reasonable prediction for the changes in the inclination of the quay wall and the crack generation and propagation on the backfill from a current inclination condition grade.

• 한국주조공학회지
• /
• 제19권1호
• /
• pp.47-53
• /
• 1999

Squeeze casting process has been used in the field of a commercial manufacturing method, in which metal is enforcedly solidified under pressure enough to prevent the cast defects such as either gas porosity or shrinkage defect. In this paper, to clarify the relationship between applied pressures and macro ${\cdot}$ microstructural behaviors in gravity and direct squeeze casts, specimens were cast by various squeezing pressures during solidification of 7000 series Al wrought alloy in the metal die designed specially. The applied pressures used in this study were 0, 25, 50, and 75 MPa. The microstructural morphologies of squeeze cast were more fine and dense with increasing the applied pressures, because of the greater solidification rate of billet resulting from the applied pressure. A normal segregation phenomenon of an increasing in amount of eutectics towards the center of the billet was observed for squeeze casts, whereas gravity cast showed an inverse segregation phenomenon of an increasing in amount of eutectics towards the edge in the billet. This change in segregation pattern which is normal or inverse is due to a higher radial temperature gradient and reduced time in the semi solid state for squeeze casting.

• 한국측량학회지
• /
• 제33권3호
• /
• pp.181-192
• /
• 2015

Bathymetry change due to the 2011 Tohoku (M9.0) earthquake was investigated through satellite altimetry-derived free-air gravity anomalies (SAFAGA) and shipborne measurements. The earthquake occurred at the plate boundaries near the northeastern coast of Japan, where the oceanic plate subducts beneath the continental plate along deep-sea trench. Data analyzed in this study include SAFAGA from Scripps Institution of Oceanography (SIO), shipborne bathymetry (SB) from the U.S. National Geophysical Data Center (NGDC) and the Japan Agency for Marine-Earth-Science And Technology (JAMSTEC). To estimate the bathymetry change, a reference bathymetry before the earthquake was predicted by gravity-geologic method (GGM) and Smith & Sandwell’s (SAS) method. In comparison with the bathymetry models before the earthquake, GGM bathymetry model generated by a tuning density contrast of 17.04 g/cm³ by downward continuation method was selected because it shows better bathymetry in the short wavelength below about 6 km. From the results, remarkable bathymetry change of about ±50 m was found on the west side of the Japan Trench caused by the earthquake.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.151-155
• /
• 2014

This study compares the effects of flow on oil and suspended solids removal efficiencies in circular enhanced gravity plate separator equipped with coalescence medium. Coalescence medium acts to capture rising oil droplets and settling solid particles and assist in the coalescence of oil and coagulation of solid. The circular separator uses an upflow center-feed perforated-pipe distributor as the inlet. The co-current flow is achieved using 4 increasing sizes of frustum, whereas cross flow uses inclined coalescence plates running along the radius of the separator. The different arrangement gave the cross flow separator a higher coalescence plan area per operational volume, minimal and constant travelling distance for the oil droplets and particles, lower retention time, and higher operational flowrate. The cross flow separator exhibited 6.04% and 13.16% higher oil and total suspended solids removal efficiencies as compared to co-current flow.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.19-24
• /
• 2016

Oil sands are a mixture of sand, clay, and a high-viscosity petroleum called bitumen. Steam-Assisted Gravity Drainage (SAGD) is the most viable and environmentally safe recovery technology for extracting bitumen. It extracts the viscosity-lowered bitumen by high pressure, high temperature steam injected into the bitumen reservoir. The steam is produced at the Central Processing Facility (CPF). Typically, more than 90% of the energy consumed in producing bitumen are used to generate the steam. Fuels are employed in the process, which cause economic and environmental problems. This paper explores the retrofit of heat exchanger network to reduce the usage of hot and cold utilities. The hot and cold utilities are reduced respectively 6% and 37.3% which in turn resulted in 5.3% saving of total annual cost by improving the existing heat exchanger network of the CPF.