• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.570-573
• /
• 2022

This paper presents the identification of void diameters for a cast-resin transformer using an artificial neural network (ANN) model. A PD signal was measured by the Rogowski coil sensor which has the planar and thin structures fabricated on a printed circuit board (PCB), and the PD electrode system was fabricated to simulate a PD defect by a void. In addition, void samples with different diameters were fabricated by injecting air in a cylindrical aluminum frame using a syringe during the epoxy curing process. To identify the diameter of void defects, PD characteristics such as the discharge magnitude, pulse count, and phase angle were extracted and back propagation algorithm (BPA) was designed using virtual instrument (VI) based on the Labview program. From the experimental results, the BPA algorithm proposed in this paper has over 90% accurate rate to identify the diameter of void defects and is expected to use reference data of maintenance and replacement of insulation for cast-resin transformers in the on-site PD measurement.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3973-3982
• /
• 2023

As for two-phase flow in rectangular channels, the flow regimes especially like churn-turbulent and annular flow are significant for the physical problem like Countercurrent Flow Limitation (CCFL). In this study, the rectangular channels with cross-sections of 4 × 66 mm, 6 × 66 mm, 8 × 66 mm are adopted to investigate the flow regimes of air-water vertical upward two phase flow under adiabatic condition. The gas and liquid superficial velocities are 0 ≤ j_g ≤ 20m/s and 0.25 ≤ j_f ≤ 3m/s respectively which covering bubbly to annular flow. The flow regimes are identified by random forest algorithm and the flow regime maps are obtained. As the results, the transitional void fraction from slug to churn turbulent flow fluctuate from 0.47 to 0.58 which is significantly affected by the dimensional size of channel and flow rate. Besides, the void fraction at transitional points from churn-turbulent (slug) to annular flow are 0.66-0.67, which are independent with the gap size. Furthermore, a new criteria of slug to churn-turbulent flow is established in this study. In addition, by introducing the interfacial force model, the criteria of churn-turbulent (slug) flow to annular flow is verified.

• Transactions of the KSME C: Technology and Education
• /
• v.4 no.1
• /
• pp.35-41
• /
• 2016

Geothermal heat pump (GHP) systems have been proved to be one of the most efficient systems for heating and cooling in buildings. However, an optimal energy performance depends on a good control of the system components, including heat pumps and circulation pumps, which affect to the total energy consumption of system. This paper presents the simulation results of the heat pump performance for two different control schemes, i.e. constant setting temperature (Control-A) and variable setting temperatures (Control-B) in buffer tank. A dynamic simulation tool, TRNSYS 17, was used to model the entire system and to assess the performance of the system. Simulation results show that the Control-B, which controls the temperature in buffer tank with outdoor air temperature, is a effective way to reduce the energy consumptions in heat pump (7.7%) and circulation pump (7.5%).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.315-324
• /
• 2012

This paper presents a numerical investigation of the deflagration-to-detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene/air mixture as the combustible gas, considering geometrical changes by using obstacles and bent tubes. The model used consists of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment. Simulations with a variety of bent tubes with obstacles show the generation of hot spots through flame and strong shock-wave interactions, and restrained or accelerated flame propagation due to geometrical effects. In addition, the simulation results show that the DDT occurs with a nearly constant chemical heat-release rate of 20 MJ/($g{\bullet}s$) in our numerical setup. Furthermore, the DDT triggering time can be delayed by the absence of unreacted material together with insufficient pressures and temperatures induced by different flame shapes, although hot spots are formed in the same positions.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.107-115
• /
• 2006

In the environment of single application data broadcasting, only one application can be serviced at a specific time on one channel. To overcome this, we developed the structure and the method of operation for multi-applications which are fully conformant to the ACAP (Advanced Common Application Platform), and modified data broadcasting system to support multi-applications. In multi-application environment, broadcasters can service multiple applications simultaneously at a specific airtime on one channel so users can enjoy services selectively according to their preferences. In this paper, we present an example of multi-application service which was developed to make an experiment before servicing them to users on the air. The core of the multi-application is a manager application which manages other ordinary applications, so we describe the function and structure of the manager application, and then present the experimental results to show that the proposed method is the proper model for multi-applications.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1868-1874
• /
• 2007

We have developed a robotic system for an automated parallel cell cultivation process that enables screening of induction parameters for the soluble expression of recombinant protein. The system is designed for parallelized and simultaneous cultivation of up to 24 different types of cells or a single type of cell at 24 different conditions. Twenty-four culture vessels of about 200 ml are arranged in four columns${\times}$six rows. The system is equipped with four independent thermostated waterbaths, each of which accommodates six culture vessels. A two-channel liquid handler is attached in order to distribute medium from the reservoir to the culture vessels, to transfer seed or other reagents, and to take an aliquot from the growing cells. Cells in each vessel are agitated and aerated by sparging filtered air. We tested the system by growing Escherichia coli BL21(DE3) cells harboring a plasmid for a model protein, and used it in optimizing protein expression conditions by varying the induction temperature and the inducer concentration. The results revealed the usefulness of our custom-made cell cultivation robot in screening optimal conditions for the expression of soluble proteins.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.893-899
• /
• 2011

The occurrence of THMs, the characteristics of THMs formation and removal of THMs were investigated. The treatment train of M plant consists of prechlorination, flocculation, sedimentation, filtration, ozonation, activated carbon and postchlorination. The study of THM formation indicated that about 92% of the THMs were formed in the flocculation/sedimentation/filtration process which affected by prechlorination. The formation of THMs was highly correlated to $KMnO_4$ consumption and water temperature in raw water. The regression model had showed 0.72~0.80 of determination coefficient so it could be used to predict the amount of THMs formation in finished water. Compared to the prechlorination process, the THMs formation was reduced in interchlorination process. With the addition of PAC, fewer THMs were formed in PAC-chlorination process than in chlorination-PAC process. Our results showed that air stripping could be used to remove the existing THMs.

• Hwankyungkyoyuk
• /
• v.9 no.1
• /
• pp.58-71
• /
• 1996

The purpose of this study was to investigate the rural housewives' recognition and practice on environmental preservation. The subjects of this study were 300 rural housewives living in Chung-buk province. Questionaires were distributed to them during a week from August $25^{th}$ to August $31^{th}$ in 1995. Major findings were as follows: 1. The saved water quite well in washing their faces and the dishes compared with urban housewives, but they did not save water so well in using the lavatory. They used synthetic detergent, one of water pollutants, more often than natural soaps in shampooing and laundering. In addition, they did not use a measuring cup. It resulted in the waste of detergent and aggravation of water pollution. 2. Food waste was disposed of properly, but used batteries were not collected separately. A disposable vinyl bag was more commonly used than a reusable shopping basket. The reason for not using a shopping basket was bothering or uncustomary. Since most of them did not know refillable products of goods with environmental mark, they did not use those. Therefore, housewives should be educated in order to prevent soil pollution. 3. The use of spry-type pesticide and hair treatment, one of air pollutants, was wide-spread among them. They hardly recognized and practiced saving of electric power when they used household electric appliances. 4. The major source of environmental knowledge was mass media like TV of radio. Many of them did not know the practical ways to solve the environmental education program. In conclusion, low level of recognition and practice of rural housewives on environmental preservation indicated that a systematic environmental education program should be developed and implemented.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.6
• /
• pp.733-740
• /
• 2012

Objective: The present study systematically analyzed the characteristics of ergonomic layout optimization methods by a comprehensive literature survey. Background: Although layout design methods for ergonomic placement of controls and displays on a console have been developed, understanding of their characteristics is lacking. Method: The present study analyzed layout optimization papers published past 20 years from the following four aspects: optimization model, optimization algorithm, design principle, and constraint/assumption. Results: The existing layout optimization methods based on various optimization techniques consider only a partial set of four layout principles(importance, frequency of use, sequence of use, and functional grouping) and two ergonomic criteria(visibility and reach). In addition, the existing methods oversimplify components in various sizes, shapes, and angles by assuming the equality of the components in size and shape. Conclusion: A more effective layout optimization method is needed which considers the layout principles and ergonomic criteria in a comprehensive manner and reflect the diversity of components in size and shape. Application: The identified characteristics on the existing layout optimization methods can be applicable to development of a better ergonomic console layout design method.

• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.1-7
• /
• 1989

The autoxidation products derived from methyl linolenate are isolated and characterized by using thin-layer chromatography, infrared, ultraviolet and nuclear magnetic resonance spectrometries. In addition, the propriety of the application of NMR spectrometry to the analysis of the autoxidation products is examined. Spectroscopic data indicate that the autoxidation of methyl linolenate produces hydroperoxides and trans, cis-substituted diene. The autoxidation products have a predominant cis, trans-conjugated diene system with some trans, trans-configuration. The spectroscopic data of ir, uv, and nmr are very consistent with each other, and further investigation of the multiplet region at $5.83{\sim}6.60ppm$ would be very helpful for the structural elucidation of the autoxidation products.