• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.152-155
• /
• 2006

Silicon carbide ceramics seeded with 10-30 wt% SiC whiskers are fabricated by hot pressing and annealing. A quantitative texture analysis including calculation of the Orientation Distribution Function (ODF) is used for obtaining the degrees of preferred orientation of the fabricated samples. The microstructure and crystallographic texture are discussed with respect to the effect of ${\beta}-SiC$ whisker seeds on the resulting fracture toughness values. The SEM microstructures and the texture data reveal a correlation between texture and fracture toughness anisotropy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.535-538
• /
• 2002

Cube-textured Ni substrates for YBCO coated conductors were fabricated by cold-rolling and annealing of Ni powder compacts. To establish the optimum sintering temperature, tensile test was performed for the Ni rod sintered at various temperatures. The Ni rods prepared at above 100$0^{\circ}C$ showed good mechanical properties due to the complete densification of the Ni rods. The Ni rods were rolled to final thickness of 100 ${\mu}{\textrm}{m}$ and then annealed at 100$0^{\circ}C$ for various annealing time for texture development. The texture analysis made by 2 $\theta$ scan and pole-figure showed that the cube texture was developed in a short time of a few munitues. The FWHM of in-plane and out of plane texture of the prepared Ni tapes was 8-10$^{\circ}$. The AEM surface roughness of the Ni tapes was as smooth as 3 nm.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.51-55
• /
• 1999

A Ni/Ag/Stainless steel 310S(SS310S) multi-layer sheet has been fabricated by a combination of vacuum brazing, cold rolling and texture annealing processes. After heat-treating the thin Ni/Ag/SS310S multi-layer sheet at $900^{\circ}C$ for 2h, development of (100)<001>cube texture on Ni surface was revealed by (111) pole figure. Quantitative chemical analysis was made by EPMA for the cross-section of the Ni/Ag/SS310S multi-layer sheet. EPMA results showed that Ag diffusion into the Ni layer, which may suppress the cube texture development, was negligible. A small amount of Cr atoms were detected in the Ni layer. It showed that Ag can be used as a chemical barrier of alloying element atoms in Ni layer for the Ni/Ag/SS310S multi-layer sheet and a strong cube texture was developed for the Ni layer in the Ni/Ag/SS310S multi-layer sheet.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.436-442
• /
• 2017

A novel method of Skin lesion segmentation based on the combination of Texture and Neural Network is proposed in this paper. This paper combines the textures of different pixels in the skin images in order to increase the performance of lesion segmentation. For segmenting skin lesions, a two-step process is done. First, automatic border detection is performed to separate the lesion from the background skin. This begins by identifying the features that represent the lesion border clearly by the process of Texture analysis. In the second step, the obtained features are given as input towards the Recurrent Echo state neural networks in order to obtain the segmented skin lesion region. The proposed algorithm is trained and tested for 862 skin lesion images in order to evaluate the accuracy of segmentation. Overall accuracy of the proposed method is compared with existing algorithms. An average accuracy of 98.8% for segmenting skin lesion images has been obtained.

• 한국식품조리과학회지
• /
• 제18권1호
• /
• pp.81-86
• /
• 2002

Yackwa was prepared by the addition of different amounts of egg white, and the samples were analyzed by texture profile analysis, Hunter's colorimetry and sensory evaluation during 5 days of storage. Tn texture profile analysis, the hardness, gumminess and chewiness of Yackwa were increased in all the samples during storage and the texture parameters were increased by increasing egg white level. No significant difference was observed in the lightness, redness and yellowness (p〉0.05), but Hunter's color values were slightly increased during storage in all the samples. In sensory evaluation, no significant difference was observed among the samples during storage except the increase of crispiness and overall acceptance by the addition of egg white. The results showed that Yackwa prepared with 10 g of egg white/(100 g of other ingredients ---약과재료 얼마당 10g 첨가인지 명확히 해야 함) had an acceptable sensory quality.

• Food Quality and Culture
• /
• 제2권1호
• /
• pp.27-31
• /
• 2008

The objective of this study was to develop sensory lexicons that can be utilized for various types of tofu such as pressed, unpressed, and tofu made from germinated soybeans, using generic descriptive analysis. In the first phase of the experiment, trained descriptive panelists developed and defined the appearance, aroma, flavor, and texture attributes that are commonly present in tofu. Then, the sensory characteristics of seven types of tofu were analyzed using the sensory lexicons established in the initial stage of the experiment. Four appearance, 6 odor/aroma, 6 flavor/taste, 7 texture, and 4 aftertaste attributes were identified, and reference standards were established for most of the terms in order to facilitate the understanding of the attribute definitions. The intensities of the sensory attributes were measured on a 15-point scale. Statistical analyses, including analysis of variance and principal component analysis, were used for the data. The seven tofu samples showed significant differences in the intensities of 22 attributes. The unpressed tofu samples were generally rated as being high in moistness, easy to cut, silky, and easy to swallow. The pressed tofu, on the other hand, was salty, astringent, beany, hard, and rough in texture. The tofu made with germinated soybeans was characterized as having a strong cooked bean flavor, salty and astringent aftertaste, and hard texture. Overall, the attributes of moistness, easy to swallow, and silkiness showed strong positive correlations; hardness and sticks to teeth were also positively correlated to each other.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.158-163
• /
• 2022

Purpose: We subjected scanning electron microscopic (SEM) images of the active layer of EBT3 film to texture analysis to determine the dose-response curve. Methods: Uncoated Gafchromic EBT3 films were prepared for direct surface SEM scanning. Absorbed doses of 0-20 Gy were delivered to the film's surface using a 6 MV TrueBeam STx photon beam. The film's surface was scanned using a SEM under 100× and 3,000× magnification. Four textural features (Homogeneity, Correlation, Contrast, and Energy) were calculated based on the gray level co-occurrence matrix (GLCM) using the SEM images corresponding to each dose. We used R-square to evaluate the linear relationship between delivered doses and textural features of the film's surface. Results: Correlation resulted in higher linearity and dose-response curve sensitivity than Homogeneity, Contrast, or Energy. The R-square value was 0.964 for correlation using 3,000× magnified SEM images with 9-pixel offsets. Dose verification was used to determine the difference between the prescribed and measured doses for 0, 5, 10, 15, and 20 Gy as 0.09, 1.96, -2.29, 0.17, and 0.08 Gy, respectively. Conclusions: Texture analysis can be used to accurately convert microscopic structural changes to the EBT3 film's surface into absorbed doses. Our proposed method is feasible and may improve the accuracy of film dosimetry used to protect patients from excess radiation exposure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.792-797
• /
• 2002

In the following paper two algorithms, suitable for the analysis of panchromatic data as provided by KOMPSAT-1 will be presented. One is a texture analysis which will be used to create a settlement mask based on the variations of gray values. The other is a fusion algorithm which allows the combination of high resolution panchromatic data with medium resolution multispectral data. The procedure developed for this purpose uses the spatial information present in the high resolution image to spatially enhance the low resolution image, while keeping the distortion of the multispectral information to a minimum. This makes it possible to use the fusion results for standard multispecatral classification routines. The procedures presented here can be automated to large extent, making them suitable for a standard processing routine of satellite data.

• 한국생활과학회지
• /
• 제18권1호
• /
• pp.137-143
• /
• 2009

The purpose of this study is to examine the evaluation of texture image and preference according to the structural characteristics of silk fabric, and to analyze the effects of texture image and sensibility on the preference. 53 female subjects evaluated fabric image and sensibility of 17 specimens of white silk fabrics sold on the market with semantic differential scale. The data were analyzed through factor analysis, Pearson correlational coefficient and t-test using SPSS win 13.0. For the evaluation, structural characteristics such as fiber contents, weave type, weight and thickness were analyzed. Factor analysis showed that sensibilities were classified into 3 categories; 'surface property', 'weight', 'flexibility'. Fabric images were classified into 2 categories; 'elegance' and 'naturalness'. Statistically significant differences of structural characteristics on the texture image were observed. Weave type affected 'surface property' and fiber contents affected' flexibility'. Weight and weave type affected' elegance', too. The significant factors affecting preference were fabric image of 'elegance' and structural characteristics of 'weave type'. The results of this study showed that the most preferred silk fabric is smooth and soft satin weaved fabric with texture image of 'elegance'.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.9-16
• /
• 2013

PURPOSES: There is a need to develop a method to incorporate tire-pavement noise in the pavement management system. Tire-pavement noise highly depends on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information to predict tire-pavement noise. This study aimed to find the relationship between tire-pavement noise and MPD(Mean Profile Depth) for concrete pavement. METHODS: MPD and tire-pavement noise were collected on the number of expressway sections including Central Inland Test Road in Korea. Statistical analysis was performed to find the correlationship between MPD and tire-pavement noise. In addition, multiple regression analysis to find the tire-pavement noise based on MPD and type of concrete pavement texture. RESULTS: Linear relationship between MPD and tire-pavement noise is observed for concrete pavement. Furthermore, a forensic equation to estimate tire-pavement noise based on MPD and texture types of concrete pavement is suggested. CONCLUSIONS: Tire-pavement noise on concrete pavement can be predicted based on the consideration of texture type and MPD estimation.