• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.180-189
• /
• 2018

To study the effect of stereoisomeric structures of curing agents on curing behaviors, thermal and mechanical properties of epoxy resins, DGEBA(diglycidyl ether of bisphenol A) epoxy resin and 3,3'- and 4,4'-DDS(diaminodiphenyl sulfone) curing agents were selected. The curing initiation temperature and activation energy of DGEBA/3,3'-DDS was lower than DGEBA/4,4'-DDS. DGEBA/3,3'-DDS has a faster curing rate and higher degree of cure than DGEBA/4,4'-DDS, suggesting that 3,3'-DDS has higher reactivity than 4,4'-DDS. Tensile strength and fracture toughness of DGEBA/3,3'-DDS was lower than those of DGEBA/4,4'-DDS, indicating that mechanical properties of the epoxy resin can be different only by the stereoisomeric difference in chemical structure of the curing agent.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.295-304
• /
• 2006

High-bulk worsted yams with different shrinkable and non-shrinkable acrylic fibers blend ratios are produced and then single jersey weft knitted fabrics with three different structures and loop lengths are constructed. The physical properties of produced yams and compression properties of produced fabrics at eight pressure values (50, 100, 200, 500, 1000, 1500 and $2000 g/cm^2$) were measured using a conventional fabric thickness tester. Then, weft-knitted fabric compression behavior was analyzed using a two parameters model. It is found that at 40 % shrinkable fibre blending ratio the maximum yam bulk, shrinkage, abrasion resistance and minimum yarn strength are obtained. It is also shown that high-bulk acrylic yarn has the highest elongation at 20 % shrinkable fibre blend ratio. The statistical regression analysis revealed that the compression behavior of acrylic weft-knitted fabrics is highly closed to two parameter model proposed for woven fabrics. It is also shown that for weft-knitted structure, there is an incompressible layer (V') which resists against high compression load. Acrylic weft-knitted fabrics with knit-tuck structure exhibit higher compression rigidity and lower softness than the plain and knit-miss structures. In addition, at 20 % shrinkable fibre blend ratio, the high-bulk acrylic weft-knitted fabrics are highly compressible.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.195.1-195.1
• /
• 2011

This paper presents an experimental study on a new potential geothermal energy source obtained from tunnel structures. An "energy textile", which is a textile-type ground heat exchanger, was fabricated between a shotcrete layer and a guided drainage geotextile in the tunnel lining system. To examine the long-term thermal behavior of the energy textile, the difference in temperatures of the inlet and outlet fluid circulating through the heat exchange pipe within the energy textile was monitored using a constant-temperature water bath. Daily heat exchange rate of the energy textile during cooling operation was estimated from the measured temperatures of the inlet and outlet fluid through the energy textile. The air and ground temperature was also continuously monitored. The operation of the energy textile as a ground heat exchanger was simulated using a 3D numerical CFD model (Fluent). The thermal conductivity of shotcrete and concrete lining components and temperature variation of air in the tunnel were incorporated in the model. The numerical analysis shows a good agreement with the long-term monitoring result.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.402-403
• /
• 2003

Garment manufacture represents the final stage of processing a finished fabric. The main task of the garment manufacturer is to produce shell structures out of flat fabrics to match the shape of the human body, and the most acceptable means of joining textile materials for apparel use is by sewing. On the sewing process, the bottom layer is pushed forward by the feed-dog, but the presser foot tends to retard the passage of the top layer. Since the friction between the layers is low, is possible that the components will move out of phase and pucker. (omitted)

• 대한가정학회지
• /
• 제30권4호
• /
• pp.1-13
• /
• 1992

A computer simulation method for textile designs was developed using a generic-purpose graphics program, LUMENA and its results were applied for costume design simulation. Its design performance was comparable with those using specialized design package programs which are in general very expensive. Three areas of textile design, print pattern design, weaving design, and knitting design, were covered. In the print pattern design simulation, a gird network library was constructed by using basic methods of repeat, and a pattern library by scanning existing print patterns. Through the modification and synthesis of library patterns, many new print patterns could be obtained. In the weaving design simulation, a thread library and a draw-down library were constructed. Using them, simulations of woven textile structures were carried out. In the knitting design simulation, a stitch library and a detail library were made from various types of knit stitch and detail drawings of knit costume, respectively. They were used to make structural knitting patterns and jacquard knitting designs. Using those simulated textile designs, costume design simulation was carried out.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.527-534
• /
• 2024

In this study, focuses on noise reduction between floors in the civil and architectural fields. Specifically, it investigates the application of newly developed 3D Textile to slabs to reduce interfloor noise. The effect of 3D Textile, through performance analysis via experiments and noise analysis using finite element method, provides a new understanding of noise reduction technology, and is expected to contribute to the improvement of living quality in residential spaces.

• Structural Engineering and Mechanics
• /
• 제86권2호
• /
• pp.211-220
• /
• 2023

The textile industry has benefited from nanotechnology in various fields of application as the use of nanomaterials, and nanotechnology is multiplying. Nanoparticles can increase the performance of textiles by up to 100 times when used in finishing, coating, and dyeing techniques, providing them with capabilities they did not previously possess. Nanotechnology is used in the textile chemical industry to produce sports mats with stain resistance, flame resistance, wrinkle resistance, moisture management, antimicrobial quality, and UV protection. The incorporation of nanomaterials into fabrics can have a significant effect on their properties, including shrinkage, strength, electrical conductivity, and flammability. Various inventions and innovations may result from nano-processed textiles in the future, thus leading to the advancement of science. This article presents the construction of sports engineering structures with high resistance to improve the quality of sports training. The mechanical properties of sports mats are improved with the help of nanotechnology. Strength, elasticity, and tear resistance are among these properties. This method enables the production of elastic, durable, and tear-resistant sports mats.

• 패션비즈니스
• /
• 제21권6호
• /
• pp.16-30
• /
• 2017

Currently, e-textile market is rapidly expanding and the emerging area of e-textiles requires electrically conductive threads for diverse applications, including wearable innovative e-textiles that can transmit/receive and display data with a variety of functions. This study introduces hybrid nano-structures which may help increase the conductivity of the textile threads for use in wearable and flexible smart apparels. For this aim, Ag was selected as a conductive material, and yarn treatment was implemented where silver nanowire (AgNW) and graphene flake (GF) hybrid structures overcome the limitations of the AgNW alone. The yarn treatment includes several treatment conditions, e.g., annealing temperature, annealing time, binder material such as polyurethane (PU), coating time, in order to search for the optimum method to form stable conductive nano-scale composite materials as thin film on the surface of textile yarns. Treatedyarns showed improved electrical resistance readings. The functionality of the spandex yarn as a stretchable conductive thread was also demonstrated. When the yarn specimens were treated with colloid of AgNW/GF, relatively good electrical conductivity value was obtained. During the extension and recovery cycles of the treated yarns, the initial resistance values did not deteriorate significantly, since the network of nanowire structure with the support of GF and polyurethane stayed flexible and stable. Through this research, it was found that when one-dimensional structure of AgNW and two-dimensional structure of GF were mixed as colloids and treated on the surface of textile yarns, flexible and stretchable electrical conductor could be formed.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.354-365
• /
• 2014

This study investigates the positioning of emotional language imagesin popular music genres for developing textile print design ideas. Auditory and synaesthetic imagery were employed to deduct emotional language imageries from popular music genres and analyze differences in emotional language imageries according to popular music genres. Six genres of popular music were selected as stimulus and a survey was conducted to analyze emotional language imagery differences and similarities depending on popular music genres. The results of this study were: The results of the factor analysis and the reliability test on emotional language imagery showed factorial structures that include Lyrical-Feminine, Intense-Masculine, Euphoric-Active, Gloomy-Melancholy, Abstruse-Sophisticated, and Addictive-Continuous. The results of the mean scores of emotional language imagery of each popular music genre showed that respondents tended to perceive that ballad and new age music are similar and hip-hop & rap, dance, and metal-rock are similar. Based on the multidimensional scaling analysis, new age positioned Lyrical-Feminine, metal-rock positioned Intense-Masculine, dance music positioned Euphoric-Active, and ballad positioned Gloomy-Melancholy. This study provides elementary resources to inspire innovative textile prints designed through different characteristics of emotional language imagery according to each popular music genre.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1993년도 제1차 학술발표초록집
• /
• pp.36-37
• /
• 1993