• 감성과학
• /
• 제20권2호
• /
• pp.117-126
• /
• 2017

본 연구에서는 직/편물 8종을 대상으로 이들 수직방향과 수평방향 수분이동특성 측정방법에 따른 소재들의 수분이동 특성을 분석하였다. 또한, 8종의 시편의 MMT에 의한 건조특성을 수직 건조 측정 결과와 비교하여 논의하였다. 수평수분이동 방법인 MMT 시험 결과는 수직법인 바이렉 방법의 결과와 유사한 거동을 나타내었다. 대나무, 린넨 및 면/나일론 복합 소재는 드롭법의 흡수시간은 짧았으며, 표면의 낮은 접촉각 및 직물의 높은 다공성에 기인한 것으로 판단되며, 친수성 스테이플 섬유의 구조와 상관이 있을 것으로 보인다. MMT에 의한 건조특성은 니트 및 대나무 직물의 최대 흡수반경이 가장 우수했으며, 수식 건조법에 비해 차이를 나타내었다. MMT 방법의 건조속도는 직물의 두께와 포화수분 흡수율과 높은 상관성을 가졌으며, 회귀계수는 각각 0.9와 0.88이었다. 이는 직물의 두께가 얇을수록 위킹 및 건조특성이 우수하며, 기능성 소재기획시 착용 내구성을 판단하는데 중요함을 의미한다. 또한 상이한 섬유소재, 실 및 구조의 소재에 대한 수분이동특성(위킹, 건조)는 측정 방법에 따라 다른 결과를 나타내었다.

• 감성과학
• /
• 제10권2호
• /
• pp.177-186
• /
• 2007

골프의 대중화가 이루어짐에 따라 다양한 연령대가 골프웨어 시장에 흡수되면서 기존의 $50{\sim}60$대 고객 뿐 아니라 $30{\sim}40$대 전문직 종사자들과 20-30대의 젊은 새로운 소비자층이 형성되어 골프웨어에 대한 소비자의 요구도 다양화되어 가고 있다. 본 연구는 골프웨어에 대한 새로운 소비자 요구를 조사하고 분석하여 다양하고 폭넓어진 골프웨어 시장에서 차별화된 상품개발과 기획에 반영할 수 있는 자료를 제공하고자 하였다. 본 연구의 조사 대상자는 대전지역에 위치한 골프 연습장을 이용하고 있는 20세 이상의 남녀 150명으로 하였다. 조사방법은 설문지법(Questionnaire method)으로 설문지의 내용은 남녀 골프 참가자들의 인구 통계학적 특성과 운동습관 및 태도에 관한 문항, 현재 착용 중인 골프웨어의 특성에 관한 문항, 골프웨어에 대한 소비자 요구 사항 문항으로 총 45문항을 개발하여 조사를 실시한 결과. 다음과 같은 결론을 도출하였다. 조사대상자 들이 현재 착용하고 있는 골프웨어에 대한 특성을 살펴 본 결과, "착용쾌적감이 좋다", "신축성이 있어 활동적이다", "사이즈가 전반적으로 잘 맞는다", "촉감이 좋다"의 문항들에서는 3.5점 이상의 높은 평점을 나타냈으나, "적당한 가격이다", "보푸라기가 잘 생기지 않는다", "세탁후 수축, 신장, 탈색, 이염이 잘 일어나지 않는다"등의 문항들은 3점이하의 비교적 낮은 평가 결과를 나타내었다. 골프웨어에 대한 소비자 요구사항을 파악하여 제품개발에 반영할 수 있도록 하기 위하여 21개의 소비자 요구사항을 추출하였다. 골프웨어에 대한 소비자의 요구사항 중 "착용감"이 가장 중요하게 고려되는 항목으로 나타났으며, 그 다음으로는 "흡수성", "촉감", "신축성", "차외선 차단", "사이즈"등의 순으로 중요하다고 응답하였다. 골프웨어에 대한 소비자의 요구사항이 어떤 차원으로 구성되어 있는가를 밝히기 위해 요인분석을 실시한 결과, 유행/디자인 특성요인, 섬유소재 특성요인, 위생성능 특성요인, 체형보정 특성요인 등 4개의 요인이 추출되었다.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.117-129
• /
• 2018

Cellulose has been widely applied into various medical fields including scaffolding, tissue engineering and tissue formation. In this study, we manufactured cellulose medical fiber from Styela clava tunics(SCT-CS) and analyzed the tensile strength, elongation at break, fluid uptake and surface morphology. And then, the biocompatibility and toxicity of SCT-CS were measured in Sprague-Dawley(SD) rats after the implantation for 30, 60 and 90 days. The level of tensile strength and fluid uptake were lower in SCT-CS than chromic catgut(CCG), while elongation at break level were maintained the higher in SCT-CS. Also, the roughness with pronounced surface patterns as a result of in vivo degradation was significantly greater in CCG than this of SCT-CS although these levels gradually appeared with time in both groups. After implantation for 90 days, SCT-CS and CCG was successfully implanted around muscle of thigh without any significant immune response. Furthermore, no significant alterations were measured in serum parameters and the specific pathological features induced by most toxic compounds for liver and kidney toxicity. Therefore, these results suggest that SCT-CS showing good biocompatibility and non-toxicity can be successfully prepared from cellulose powder of SCT as well as has the potential for use as a powerful biomaterial for medical sutures.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.36-37
• /
• 1990

In the past, facile dissolution of cellulose has been hampered by the lack of suitable nondegrading solvents. Recently, this problem has been solved in our laboratory by the discovery of an inexpensive, convenient solvent system, that is the mixture of $NH_3\;and\;NH_4SCN$, for cellulose. Also, the $cellulose/NH_3/NH_4SCN$ solution system has been found to form the anisotropic, i.e., liquid crystalline phase. It is believed that both the cholesterio and the nematic phase occur. This finding has prompted extensive on-going researoh on the formation of the liquid crystalline phase from an inexpensive natural source such as cellulose since the nematic phase is envisioned as an excellent precursor sources for products with desirable properties, for example, high modulus and high strength. This interest naturally leads to a desire to understand the theological properties of the nematic phase so that the transformation of the nematic phase to the solid state with desirable properties can be efficiently accomplished, ;From this point of view, the theological behavior of the $cellulose/NH3_/NH_4SCN$ system has been studied as a function of shear rate and shear stress over a wide range of solvent compositions, cellulose concentration, centrifugation and urea contents, Results indicate that the viscosity decreases with increasing shear rate. A marked shear thinning behavior and a quasi-Newtonian behavior were observed in the low shear rate region and in the high shear rate region, respectively for all solvent compositions. The $cellulose/NH_3/NH_4SCN$ solution system only exhibited the viscosity increase with increasing cellulose concentration and failed to show the viscosity drop generally observed at the point of incipience of liquid crystal formation, This may be due to the gel-like nature of the solution by the association of the rodlike molecules into bundles which may serve as crosslinking points giving the cellulose solution a network structure. Also, simply hydrogen bonding may be so restrictive of molecular mobility that a viscosity drop is blocked. In addition to the above results, yield stress and thixotropy were also observed in the $cellulose/NH_3/NB_4SCN$ solution system which are characteristics of liquid crystal and gel, The results of the effect of centrifugation on viscosity show that viscosity decreases by the application of centrifugation. This may be explained by the change of the piled polydomain structure to the dispersed polydomain structure due to the pressure gradient generated during centrifugation.ation.

• 생명과학회지
• /
• 제31권7호
• /
• pp.677-685
• /
• 2021

대마(Cannabis sativa L.)는 삼과에 속하는 1년생 초본식물로, 바람에 의해 수정되는 풍매화이면서 자웅이주식물이다. 대마는 중독성 마리화나와 비중독성 헴프로 구분 가능하다. 대마는 인류 역사와 가장 밀접한 관련성을 가진 식물 중 하나로, 과거로부터 다양한 부위를 식용, 약용, 화장품, 섬유, 생활용품 등으로 이용하여 왔다. 그러나 대마꽃, 잎, 종실 등에 포함된 중독, 환각 성분으로 인해, 국내에서는 1977년 1월부터 시행한 [대마관리법]에 의거하여, 대마 줄기를 이용한 섬유산업 이외에는 실질적인 연구 및 산업화가 진행되지 못하였다. 최근 대마로부터 400여종의 cannabinoids 물질, terpene 및 필수지방산 등이 확인되고, 이들의 신경세포 보호, 항염증, 항혈전, 항균, 통증완화 및 뇌전증 치료 등의 유용 생리활성이 알려지고, 테트라히드로칸나비놀(tetrahydrocannabinol)로 대표되는 환각 중독성 물질의 제거 및 저감화, 비환각성 물질의 분석, 정제 기술이 빠르게 보고되면서 2018년 12월 국내 의료용 대마의 합법화 및 2020년 12월 UN 마약위원회의 대마와 대마수지의 마약목록 삭제가 확정되었다. 따라서 국내외에서 대마의 다양한 부위를 이용한 고부가가치 식품, 화장품, 의약품 개발이 시작되고 있다. 본 보에서는 국내 2021년 헴프 기반의 바이오산업 규제자유특구 지정과 함께, 국내 대마생물산업의 현황과 대마산업 활성화를 위한 필수기술, 향후 전망을 제시하여 국내 대마 생물산업의 발전방안을 제시하고자 하였다.

• 보존과학회지
• /
• 제37권2호
• /
• pp.120-134
• /
• 2021

조선 말기 방한용 깔개인 모담(毛毯)이 창덕궁 성정각의 해체 공사 중 발견되었다. 문헌기록에 비해 현전하는 조선시대 모직물 유물이 많지 않아 유물로서 가치가 높다. 특히 1907년 창덕궁 성정각을 수리한 기록이 있어, 모담은 19세기 말 또는 20세기 초에 제작된 것으로 생각된다. 출토 모담은 자적색 계열의 바탕 직물로 위에 황색, 홍색 등으로 선염한 색사를 표면에만 삽입하여 문양을 시문하였다. 모담의 식서부분은 S연의 면사가 확인되었으며, 지경사는 Z연의 황마사, 지위사는 S연의 황마사, 문경사는 S연의 모사를 사용했다. 특히 무늬는 루프파일의 색사로, 색사의 경계면에서 일부 컷 파일이 확인되나 지위사로 고정되어 표면에 거의 드러나지 않는 다. 황마사와 모사를 사용한 것은 18세기 중엽 유럽의 브뤼셀 카펫의 영향을 받은 것으로 짐작된다. 모담의 문양을 밝히는 데 한계가 있으며 다만 문양이 부분적으로 반복됨을 알 수 있다. 이상의 연구내용을 도출하기 위해 문헌과 회화자료 외에 현미경 분석, 적외선 분광분석을 실시하였다. 또한 유물에 사용된 염료를 밝히기 위해 색도측정을 토대로 자외-가시광 분광분석을 실시하여 천연 염색한 직물 샘플에 대한 교차분석을 시도하였다. 그 결과 모담의 녹색 모사는 쪽을 사용하지 않았으며, 자적색의 바탕조직은 소목으로 염색한 것으로 추정할 수 있다.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.

• 한국의류학회지
• /
• 제33권4호
• /
• pp.574-585
• /
• 2009

This study intended to identify regional and gender differences between high school students groups in clothing-wearing motives, casual brand preference and actual purchasing condition. Using a $2{\times}2$ sampling frame, 100 responses were collected for each regional and gender group: male students in Seoul, females in Seoul, males in Gumi, and females in Gumi. In terms of clothing-wearing motives, Gumi students and female students showed more highly extroverted motives than males and Seoul students, respectively. And three groups were determined on the basis of clothing-wearing motives: the extroversion group, the introversion group, and the least clothing-cognizing group. Concerning the brand preference factor, female students showed more dispersed brand preference than males. Adidas and Puma were preferred by all 4 groups. Polo and Guess were preferred by Seoul students, and Clide, Banila B, and TBJ were preferred by female students. The determinants of brand preference were identified as quality, reliability, affirmative image, and some brand personas such as 'neat', 'natural' and 'polished'. The students from Seoul tend to pay more money for clothing than those from Gumi, and Seoul students' main purchasing place was identified as department store while Gumi students shop more at brand chain stores.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.