• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.441-444
• /
• 2007

For the purpose of application to new natural dyestuff, the dyeability of Purple onion shell extract was analyzed. It was dyed in cotton fabric according to various dye weight, dyeing temperature, dyeing time. And the effects of mordanting conditions were examined as color differences and color fastnesses. The dyeaffinities were increased as were increased dye weight, especially 100% owf. The optimum dyeing condition of Purple onion shell extract was 40minutes at $60^{\circ}C$. The dyeaffinity was increased at pre-mordanted condition, and color difference was increased distinctly at post mordanted condition. The hue of all mordanted cotton fabrics changed into Yellow where as non mordanted cotton fabric was Red. The color fastnesses of mordanted cotton fabrics were generally not so god, but light fastness was improved in post-Cu mordanted fabric.

• Fashion & Textile Research Journal
• /
• v.5 no.4
• /
• pp.399-407
• /
• 2003

The natural dyeing of silk fabric with Purple-Fleshed Sweet Potato (PSP) was investigated. The colorant was extracted with distilled water, and the color difference (${\Delta}E^*$) was increased with increasing the amount of PSP in extraction. The proper temperature and time for the extracting of colorant with PSP were $60^{\circ}C$ and 60 minutes. The optimum temperature, time and pH for the dyeing of silk with extracted PSP were $60^{\circ}C$, 60 minutes and pH 4 respectively. In various mordanted methods, the color difference values of post-mordanted silk fabric were higher than those of pre- and simultaneous-mordanted method. And the wide range of colors( GY, Y, YR, R, RP) were obtained according to various mordants, mordanting methods and mordant concentrations. Light colorfastness of the mordanted silk fabric was improved. Laundering colorfastness, dry cleaning colorfastness and perspiration colorfastness were shown to be good.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.32-37
• /
• 2001

Silk fabric was sputter-treated with Au, Cu, SUS, and Ti using poly(vinyl alcohol) (PVA) as a binder, and its changes in color, antielectrostatic property, airpermearbility, and rubbing fastness were investigated. Sputter-treated silk fabric had a natural color of metal target, which was deepened by treatment of PVA solution. The rubbing fastness of thin metal layer formed by sputtering was improved by PVA treatment. Au had highest rubbing fastness among the metal targets. In addition, PVA treatment posterior to sputtering resulted In higher rubbing fastness than the other treatment method. However, a reverse trend was found in antielectrostatic property. Air permeability of the sputter-treated silk fabric was improved by PVA treatment, which was highest when sputtering was conducted prior to PVA treatment.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.146-156
• /
• 2022

In this study, the dyeing properties of double knit fabric composed of PET/PTT bi-component fiber and quick dry fiber were examined with disperse dyes. In addition, the shrinkage characteristics were investigated during the dyeing process. The K/S values and shrinkage rate of PET/PTT bi-component fiber were higher than those of PET/co-PET bi-component fiber and quick dry fiber. In the dye bath, dye migration of exhausted on PET/PTT bi-component fiber to quick dry fiber was found at high dyeing temperature. It was not found that there was a significant difference in K/S value on dyeing temperature between 115℃ and 130℃. But the slight color difference of two sides of a double knit fabric was found.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.234-238
• /
• 2004

Loess was selected as one of the natural dyes and dye solution was extracted from it. With the dyes extracted from loess, the sample fabrics were dyed at 10, 20, and 30 minutes and then $CuSO_4$ was used to treat the dyed fabrics on the concentration of 3%, and 5%. Color difference and colorfastness of the sample fabrics with dyeing time and concentration of post-mordanted agent were analysed. The results were as follows: 1. Effective dying time was 20 minutes since any more dye up-take to the fabrics did not occur after that time. 2. There was distinctive dyeing effect according to whether post-mordanted method was done or not, but there was little effect between post-mordanted concentration of 3% and 5%. 3. There was no effect of the colorfastness on the post-mordanted concentration. The abrasion and laundering colorfastness of post-mordanted fabric samples was better than those of no post-mordanted fabric samples and the light colorfastness of the fabric samples was good regardless of post-mordanted method.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.162-167
• /
• 2001

The dyeing powder drawn out from Cinnamoum cassia by water was concentrated. Using this powder, the silk fabrics were dyed and they measured with the K/S value, surface color, dye fastness and antimicrobial properties. The colorant of Cinnamoum cassia was proved flavonoids by FT-IR spectrum. The K/S values of silk by mordants concentration were much higher than those of high-concentration, the color yield of the silk fabrics were most efficient the premordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark except AI-mordant. The chroma produced clear for the unmordanting, the color difference was distinct when using the Fe-mordant. The color fastness was significantly improved when mordants were added. In the case of the light fastness, Cu-mordants improved more than 1-2 level. The Cu-mordant showed the greatest antimicrobial activity on the silk fabric.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.15-25
• /
• 1996

Wool fabric and merino wool top were dyed with two dyes, C.I. Acid Red 13 and C.I. Direct Blue 1 in presence of hydrogen peroxide/glyoxal redox system at various conditions such as dyeing time, temperature and redox concentration. The pH of dye bath was 4.5 in buffer solution of $KH_{2}PO_{4}$ (0.1mol/1)/$Na_{2}HPO_{4}$ (0.1mol/1). Also dyeing of cotton fabric was carried out with C.I. Direct Blue 1 in absence or presence of redox system. The color depth(K/S) increased with redox concentration and dyeing temperature. The increases in dyeing rate and equilibrium dye exhaustion of Acid Acid 13 and Direct Blue 1 on wool fiber and fabric in the present of hydrogen peroxide/glyoxal have been caused by decreasing in pH value during dyeing process which due to the decomposition of hydrogen ion in glyoxal with the assistance of hydrogen peroxide. But the decreases in exhaustion of Direct Blue 1 on cotton may be attributed to repulsive interac ion between salt and salt.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.10-19
• /
• 1993

Broad, mercerized broad, mercerized twill cotton fabrics and rayon fabric were treated with cellulase for 30~480 minutes at different temperature, concentration, time, and also treating methods such as continuously-treated or repeatedly-treated, and dyed with two direct dyes before or after enzyme treatment. From the experimental result by treating under the various conditions above, it was obtained that the weight loss increased more in thin fabric than thick one. In addition, it was considered that the treatment in 5$0^{\circ}C$ for 240 minutes brought about the ideal weight loss and flexible hand of the specimens. For both broad and mercerized broad, repeated treatment showed more weight loss than continuous. Direct dye on cotton fabric apparently inhibited hydrolysis. Ionic surfactants showed the inhibition effect of the catalytic hydrolysis of enzyme, on the other hand, nonionic surfactant did not.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.295-304
• /
• 2006

High-bulk worsted yams with different shrinkable and non-shrinkable acrylic fibers blend ratios are produced and then single jersey weft knitted fabrics with three different structures and loop lengths are constructed. The physical properties of produced yams and compression properties of produced fabrics at eight pressure values (50, 100, 200, 500, 1000, 1500 and $2000 g/cm^2$) were measured using a conventional fabric thickness tester. Then, weft-knitted fabric compression behavior was analyzed using a two parameters model. It is found that at 40 % shrinkable fibre blending ratio the maximum yam bulk, shrinkage, abrasion resistance and minimum yarn strength are obtained. It is also shown that high-bulk acrylic yarn has the highest elongation at 20 % shrinkable fibre blend ratio. The statistical regression analysis revealed that the compression behavior of acrylic weft-knitted fabrics is highly closed to two parameter model proposed for woven fabrics. It is also shown that for weft-knitted structure, there is an incompressible layer (V') which resists against high compression load. Acrylic weft-knitted fabrics with knit-tuck structure exhibit higher compression rigidity and lower softness than the plain and knit-miss structures. In addition, at 20 % shrinkable fibre blend ratio, the high-bulk acrylic weft-knitted fabrics are highly compressible.