• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.229-232
• /
• 2006

Two novel synthetic route proposed for Hydro-Terminated Poly(EO-ran-THF) and tri-block(PEC-PTHF-PEG) copolymer by cationic ring-opening polymerization of tetrahydrofuran(THF) and ethylene oxide(EO) and just by polymerization of EO on poly-THF, respectively. Polyurethane was synthesized from random and tri-block HTPE using N-100/IPDI mixture as curing agent, and TPB(Triphenylbismuth) as catalyst. The mechanical properties of resultant polyurethane after mixing with various ratio of isocyanate was also investigated. Finally, the post treatment process of HTPE based on amount of catalyst used in the synthesis was studied, to evaluate the optimum curing condition for the polyurethane propellant binder.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1825-1831
• /
• 2014

Grignard metathesis polymerizations of 1,1-disubstituted-2,5-dibromo-3,4-diphenylsiloles such as 1,1-dimethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diisopropyl-2,5-dibromo-3,4-diphenylsilole, and 1,1-dihexyl-2,5-dibromo-3,4-diphenylsilole were performed to yield poly(1,1-disubstituted-3,4-diphenyl-2,5-silole)s containing fluorescent aromatic chromophore groups such as phenyl and silole in the polymer main chain: poly(1,1-dimethyl-3,4-diphenyl-2,5-silole), poly(1,1-diethyl-3,4-diphenyl-2,5-silole), poly(1,1-diisopropyl-3,4-diphenyl-2,5-silole), and poly(1,1-dihexyl-3,4-diphenyl-2,5-silole), respectively. The obtained materials are highly soluble in common organic solvents such as chloroform and tetrahydrofuran. Fourier-transform infrared spectra of all the polymers have characteristic C=C stretching frequencies at $1620-1628cm^{-1}$. The prepared organosilicon polymers exhibit strong absorption maximum peaks at 273-293 nm in the tetrahydrofuran solution, showing a red-shift of 18-34 nm relative to those of the monomer, strong excitation maximum peaks at 276-303 nm, and strong fluorescence emission maximum bands at 350-440 nm. Thermogravimetric analysis shows that most of the polymers are stable up to $200^{\circ}C$ with a weight loss of 6-16% in nitrogen.

• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.89-94
• /
• 2004

N-Vinylcarbazole (VCZ) was solution-polymerized in tetrahydrofuran (THF) at 25, 35, and $45^{\circ}C$ using a room temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN); the effects of amount of solvent, polymerization temperature, and initiator concentration were investigated. On the whole, the experimental results corresponded to predicted ones. Room polymerization temperature using ADMVN proved to be successful in obtaining poly(N-vinylcarbazole) (PVCZ) of high molecular weight with small temperature rise during polymerization, nevertheless of free radical polymerization by azoinitiator. The polymerization rate of VCZ in THF was proportional to the 0.47 power of ADMVN concentration. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ prepared in THF at $25^{\circ}C$ using ADMVN concentration of 0.00005 mol/mol of VCZ, weight-average molecular weight of 221,000 was obtained, with polydispersity index of 2.05, and degree of lightness converged to about 99%.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.334-339
• /
• 2013

In this study, as a candidate of the carbon dioxide ($CO_2$) absorbents, the mixture solution of polyethylene glycol dimethyl ether (PEGDME) and tetrahydrofuran (THF) were investigated. $CO_2$ absorption rate was measured by using high pressure $CO_2$ screening equipment in the range of 1 - 10wt% THF. Absorption capacity of the mixture solution was also estimated. Based on the results, we found that mixture solution containing THF had higher absorption rate and $CO_2$ loading capacity compared to PEGDME at $25^{\circ}C$.

• Composites Research
• /
• v.25 no.5
• /
• pp.159-163
• /
• 2012

The coating of metal surface with carbon nanotubes(CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The multiwalled carbon nanotube/copper oxide(CuO) composite powder, which has been surface modified by dispersant and polyvinyl alcohol solution, was ultrasonically sprayed and sintered on a copper wafer. In this paper, experiments were performed to assess the characterization and comparison of the carbon nanotube before and after sinterning and the morphology changes of the CNT/CuO-coated surface by using different dispersants. The dispersants used are THF (Tetrahydrofuran), SDBS(Dodecylbenzenesulfonic acid sodium salt), SDS(Sodium dodecy sulfate). The samples were examined by scanning electron microscopy(SEM), thermogravimetric analysis(TGA), differential scanning calorimeter(DSC) and Raman spectroscopy.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.463-467
• /
• 1975

The polymerization of methyl methacrylate(MMA) initiated by cobalt (II) nitrate in tetrahydrofuran (THF) has been studied. From the results of kinetic studies, the overall polymerization rate (Rp) could be expressed as following; $R_p=k\;[cobalt(Ⅱ)\;nitrate]^{0.5}\;[MMA]^{1.5}$ By considering the effects of chelating agent on the polymerization rate, it could be assumed that the monomer, MMA might form a coordination complex with cobalt(II) nitrate. In the presence of radical inhibitor hydroquinone, the inhibition time was observed. And the apparent overall activation energy was calculated to be 14.0 kcal/mole.

• Journal of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.259-267
• /
• 1978

In order to find out the selective reducing characteristics of lithium borohydride, borane, and borane-lithium chloride (1 : 0.1) in the reduction of carbonyl compounds, five representative equimolar mixtures of carbonyl compounds were chosen; benzaldehyde-acetophenone, benzaldehyde-2-heptanone, 2-heptanone-benzophenone, acetophenone-benzophenone, and 2-heptanone-acetophenone, and reacted with limited amount of lithium borohydride, borane or borane-lithium chloride (1 : 0.1) in tetrahydrofuran (THF) at $0^{\circ}$. Borane-lithium chloride (1 : 0.1) showed the excellent selectivity, however, lithium borohydride and borane also exhibited good selectivity except for the 2-heptanone-acetophenone.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.76-80
• /
• 1995

Polydimethylsiloxane(PDMS)-co-poly(2-hydroxyethyl methacrylate)(PHEMA) was prepared and the degree of swelling of solvents into the polymers was examined. It was confirmed that the solubility parameter of PHEMA homopolymer is 26 (J/cm3)1/2. Ethanol was significantly absorbed into copolymers containing large amount of PHEMA, while tetrahydrofuran was effectively absorbed into copolymers containing large amount of PDMS. Absorption of polar solvents into the copolymers were increased with the increase of PDMS content. The model drug, crystal violet (CV), was more absorbable into PDMS-HPEMA copolymers than PHEMA homopolymer. Absorption of CV was decreased with the increase of PDMS content of the copolymers.

• YAKHAK HOEJI
• /
• v.36 no.5
• /
• pp.506-511
• /
• 1992

The Prostaglandins were derivatized rapidly with monodansyl cadaverine as a fluorophore in mild conditions. The carboxylic moiety of prostaglandins was activated with diethyl phosphorocyanidate and successively coupled with fluorophore in dimethylformamide at room temperature. The labeling yield was reached about 95% at 15 min using arachidic acid $(C_{20:0})$ as a test sample. This derivative showed constant fluorescent intensity at $4^{\circ}C$ for 180 days. The derivatives of prostaglandins were shown high solvent selectivity with tetrahydrofuran in reversed-phase column. therefore, these derivatives could be successfully separated on YMC pack A-212(S-5 120A C8) column in tetrahydrofuran-based eluents. The detection limits of these derivatives was ca. 500 fmol and determination limits was ca. 5 pmol as injected amount in fluorescent detection $({\lambda}ex.\;340\;nm,\;{\lambda}em.\;520\;nm)$. In this method, the ranges of recovery and coefficient of variation were $93.6{\sim}102.7%$ and $4.3{\sim}5.8%$, respectively.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.249-259
• /
• 1988

The solvent effects of MeOH-solvent dimers were studied via AM1 Hamiltonian and supermolecule methods. Methanol, ethanol, acetone, dimethylsulfoxide, N,N-dimethylformamide, tetrahydrofuran, dioxane, and acetonitrile were considered as solvent molecules. Optimized geometries, electron densities, molecular energies, and hydrogen-bonding energies of monomers and dimers were calculated. We found that the stabilization energies contributed to the hydrogen-bonding were decreased in the order of dimethylsulfoxide > ethanol > N,N-dimethylformamide > acetone > methanol > tatrahydrofuran > dioxane > acetonitrile, and this order was explained by using the change of electron density and energy partition functions.