• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.736-740
• /
• 2013

In this study, the influence of electrochemical properties by mixing Tetrabutylammonium hydroxide (TBAOH) and ammonium hydroxide (NH4OH) electrode on the dssc. The titanias were prepared using a sol-gel method by mixing Tetrabutylammonium hydroxide and Ammonium hydroxide. The $TiO_2$ nanopowder prepared by sol-gel methode, and to improve the distributed properties of $TiO_2$ nanopowder, the TBAOH and NH4OH was added. The I-V values of cells show that the Tetrabutylammonium has 6.51% efficiency.

• 폴리머
• /
• 제36권4호
• /
• pp.427-433
• /
• 2012

이미드/아라미드/설폰기가 교대로 도입된 poly(imide-aramid-sulfone)s을 divinyl sulfone(DVS)과 $N^1,N^4$-bis(4-(vinylsulfonyl)phenyl)terephthalamide (2)를 pyromellitic diimide와 반응하여 높은 수율로 제조하였다. 또한 고분자를 닮은 3가지 모델 화합물인 N-[2-(p-aminophnenylsulfonyl)ethyl]phthalimide (3), 2,2'-(2,2'-sulfonylbis(ethane-2,1-diyl))diisoindoline-1,3-dione (4), 및 N,N-bis(4-(2-(1,3-dioxoisoindolin-2-yl)ethylsulfonyl)phenyl)terephthalamide (5)을p-aminophenyl vinyl sulfone, DVS, 2와 phthalimide와 반응하여 얻었다. 축합 중합은 phthalimide 기와 DVS의 마이클 첨가 반응에 의하여 균일 용액으로 진행되며 tetrabutylammonium hydroxide (TBAH)가 촉매로 작용하여 poly(imide-aramid-sulfone)s 6-12의 분자량이 큰 중합체를 얻을 수 있었다. DVS/2의 구성비는 1/0, 3/1, 2/1, 1/1, 1/2, 1/3, 및 0/1이다. 얻어진 고분자들은 극성 용매인 N,N-dimethylformamide, dimethylsulfoxide, N-methylpyrrolidinone 및 tetrahydrofuran에 잘 용해하였다. 그 밖에 분자량, 점도 그리고 열적 성질을 평가하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.173-176
• /
• 2006

Pyrolysis-gas chromatography (Py-GC) in the presence of organic alkali of tetrabutylammonium hydroxide (TBAH) was applied to characterize the polyphenol fragments with a carbonyl group causing different magnitude of photo-yellowing in chemithermomechanical pulp (CTMP) papers. Two different origin of CTMP papers prepared from different individuals of Eucalyptus globulus trees showing high and low yellowing after photo-irradiation was compared before photo-irradiation. As a result, 7 peaks assigned to a series of phenol compounds with a carbonyl group, derived mainly from lignin, gave significant amount of phenol compounds with a carbonyl group for the paper sample of latent high yellowing, i.e., butoxy-and syringaldehyde, butoxy-and syringylacetone, butoxy-acetoguaiacone, butoxy-acetosyringone, butoxy-acetoethylsyringone, 3-methoxy-4-butoxy butyl ester, and 3,5-dimethoxy-4-butoxy butyl ester, using Py-GC/mass spectrometry (MS). The Py-GC method combined with TBAH successfully characterized polyphenol fragments with a carbonyl group causing differ high photo-yellowing in CTMP papers using a microgram order of samples.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1699-1702
• /
• 2012

$TiO_2$ nanostructures with various morphologies like cubes, spheres, hexahedral pillars and spherical tubes were synthesized by microwave-assisted hydrothermal process. Each structure was obtained by changing the relative concentrations of titanium tetraisoproxide (TTIP), tetrabutylammonium hydroxide (TBAH) and ethanol. Scanning electron microscopy (SEM), transmission electoron microscopy (TEM), X-ray diffraction and Brunauer-Emmett-Teller (BET) surface area analysis were used to characterize the synthesized $TiO_2$ nanostructures. From these results, it has been proved that $TiO_2$ structure could be controlled to have specific morphology, size, surface area, pore volume and pore size distribution.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.33-39
• /
• 2015

타이타늄산바륨($BaTiO_3$)은 대표적인 강유전 물질로 유전상수가 200 이상의 값을 나타내는 물질이다. 타이타늄산바륨을 나노입자화하면 나노커패시터(nanocapacitors)와 강유전체 메모리(ferroelectric random access memories)와 같이 여러 용도로 응용 가능하다. 하지만, 나노입자의 합성방법에 따라 나노입자의 분산특성이 달라지며 이에 활용할 수 있는 분야가 달라질 수 있다. 본 연구에서는 타이타늄산바륨 나노입자를 옥살레이트법(oxalate method)과 sol-gel법(ambient condition sol method)으로 합성하고 각 방법에 따른 나노입자의 크기와 분산상태를 확인하였다. 각각의 공정에 사용한 캡핑 에이전트(capping agent)는 poly vinyl pyrrolidone (PVP)을 옥살레이트법에 이용하였고 sol-gel법에는 tetrabutylammonium hydroxide (TBAH)를 이용하였다. 합성된 나노입자의 X-선 회절 분석 패턴을 분석하여 cubic 결정구조를 갖는 타이타늄산바륨을 확인하였다. 푸리에(Fourier) 변환 적외선 분광분석을 이용하여 나노입자의 캡핑 에이전트 결합상태와 시차주사현미경과 입도분석기를 이용한 나노입자의 크기 및 뭉침 변화를 확인하였다.

• 대한방사성의약품학회지
• /
• 제5권2호
• /
• pp.158-162
• /
• 2019

[¹¹C]GR205171, a Neurokinin 1 (NK1) radioligand, has been known as such a promising PET probe for quantitation of NK1 receptors in the brain by positron emission tomography (PET) imaging. First trial to synthesis of [¹¹C]GR205171 was to use methylene chloride and tetrabutylammonium hydroxide for preactivation of precursor, but the result was not successful in radiochemical yield (0~25%) and unreliable. 7 years later, inorganic base (Cs₂CO₃) was tried to achieve higher radiochemical yield, and they showed higher yield (~53%). We have tried to repeat the same synthesis method, but it did not work properly, because there were the lack of the detail procedure and still reproducibility in radiochemical yield. Here we report the improved synthesis protocol to produce [¹¹C]GR205171 in high yield via commercial automated synthesizer. The sonicator which combines water heating bath was used to activate desmethyl-GR205171, and this method showed high efficiency and reasonable yields (4.7 ± 0.6%, non-decay corrected from molecular sieve trap) with >95% radiochemical purity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.27-29
• /
• 2009

본 연구에서는 Titanate Nanotube (TNT)를 LBL-SA (layer-by-layer self-assembling) method을 이용하여 전기변색 (electrochromism device, ECD) 소자에 적용하고자 하였다. TNT 분말은 10M NaOH와 $TiO_2$를 혼합한 후 autoclave에서 130$^{\circ}C$, 48시간 동안 수열합성하여 제조하였다. 주사전자현미경 (SEM)으로 TNT 분말의 형상을 관찰한 결과, 직경 20$\sim$30nm, 길이 500$\sim$600nm의 튜브 형상을 나타내었으며, X-선 회절시험 (XRD) 결과 층상구조로 확인되었다. 코팅 물질의 표면 전하를 이용한 LBL-SA method에 적용시키기 위해 수용액 중에서 TNT 입자 표면 전하를 TBAOH (tetrabutylammonium hydroxide)를 적정하여 제타 전위 값이 -40mV로 최대가 되도록 하였으며, 이때 pH 값은 9로 나타났다. 2전극 시스템을 이용하여 cycle voltammetry를 측정한 결과, -0.5$\sim$-1.5V 영역에서 산화환원전위 피크가 뚜렷하게 나타났으며, 짙은 갈색으로 변색되는 것을 확인하였다. 본 연구 결과로서 TNT 박막은 전기를 인가하였을 때 n-type 반도체 성질을 갖는 것으로 나타났으며, 앞으로 display 연구 분야에 적용할 수 있을 것으로 주목된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.12.1-12.1
• /
• 2010

We have developed a facile method to position different dyes (N719 and N749) sequentially in a mesoporous TiO2 layer through selective desorption and adsorption processes. Only upper part of the first adsorbed N719 dye was selectively removed by the desorption solution formulated with polypropylene glycol and tetrabutylammonium hydroxide without any damages of the dye. The desorption depth was controlled by the number of desorption process. Multi-dyed dye-sensitized solar cells (MDSSC) were fabricated by utilizing the method and their photovoltaic properties were investigated. From the incident photon-to-current conversion efficiency (IPCE) measurement, it was found that the MDSSC exhibited the extended spectral response for the solar spectrum while without decrease of maximum IPCE value compare to the DSSCs using one kind of dye (N719 or N749). The highest photocurrent density of 19.3 mA/cm2 was obtained from the MDSSC utilizing $15\;{\mu}m$ N719 / $14\;{\mu}m$ N749 bi-layered mesoporous TiO2 film. The photocurrent density was 25% and 8% higher than that of the DSSC using only N719 and N749 dye as a sensitizer, respectively. The power conversion efficiency of 9.8% was achieved from the MDSSC under the AM 1.5G one sun illumination.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.300-305
• /
• 2006

The chemical structure of a semi-aromatic polyimide-I, which was prepared by the chemical imidization of cyclopentanetetracarboxylic dianhydride and 2,2-bis(4-aminophenyl)hexafluoropropane, was characterized by $^{13}C-NMR$ spectroscopy. The chemically imidized polyimide-I was used for the preparation of a photosensitive polyimide (PSPI) through the addition of benzophenone and benzophenone oxime hexamethylene diurethane (BOHD), a photobase generator containing oxime-urethane groups. The polyimide-I film containing benzophenone and BOHD was not soluble in 2.38 wt% tetrabutylammonium hydroxide solution in $H_2O$. However, it became soluble following irradiation with 310 nm UV light. A positive tone image with a resolution of $5{\mu}m$ was obtained with this PSPI, having sensitivity($D_c$) of $1.2J/cm^2$ and contrast(${\gamma}_p$) of 1.08. Thus, a polyimide, which is not intrinsically photosensitive, can become photosensitive through the addition of a photobase generator containing oxime-urethane groups as a photosensitive compound.

• 분석과학
• /
• 제30권1호
• /
• pp.39-48
• /
• 2017

Roxithromycin (RXT), which is an antibiotic used to treat respiratory tract and urinary infections, is official in Korean Pharmacopoeia (KP) and is marketed in various dosage forms including tablet, granule, suspension, and tablet for suspension in Korea. This study presents how a universal and reliable method to quantify RXT in bulk drug and formulations was developed. Effects of factors including column type, buffer concentration, type and concentration of organic solvent, buffer pH, and type and concentration of mobile phase additive, were examined, and some categorical or crucial factors including the types of column, organic solvent, mobile phase additive and the buffer pH were optimized by one-factor-at-a-time approach. Subsequently, concentrations of the buffer and additive and column temperature were optimized by response surface methodology using Box-Behnken design aiming to acquire the RXT peak of good shape. The optimized method employed a Phenomenex Gemini $5{\mu}$ C18 110A ($150{\times}4.60mm$, $5{\mu}m$) maintained at $30^{\circ}C$ with the mobile phase consisting of 25 mM phosphate buffer (pH 6.0) with 0.3 % tetrabutylammonium hydroxide and methanol at a ratio of 37:63 (v/v). Method validation results showed that the developed method was linear, precise, and accurate. Compared to the compendial methods in KP 10 that exhibited a significant tailing of the RXT peak despite using unfavorably high buffer concentrations and were not harmonized among bulk drug and formulations, this method could be universally applied to RXT bulk drug and marketed products in various dosage forms and thus was adopted in KP 11.