• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.1022-1027
• /
• 2008

TPE is used as alternative for rubber, the best example is the weather strip for automobile. The nonlinear material properties of weather strip were important to predict the behaviors of weather strip. Uniaxial tension and equi-biaxial tension tests were performed to achieve the nonlinear material constant and stress-strain curves. The nonlinear material constant of weather strip is evaluated by using the nonlinear finite element analysis. In this paper, the prediction for weather strip is analyzed by using commercial finite element program, ANSYS. The nonlinear finite element analysis of weather strip is executed to predict the behavior of weather strip for automobile.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.419-426
• /
• 2002

In this study, the steel strip reinforcement bolted with braced angles is displayed skin friction resistance as well as passive resistance through existing the steel strip reinforcement. To understand pullout behavior characteristics, friction effects between soil and reinforcement are evaluated with the width of reinforcement, magnitude of surcharge, and existence of passive resistance member through laboratory pullout test. To analyze interference effects for passive resistance member, various tests are carried on case that the number, the location, and the spacing of braced angles are different. Using this test result, pullout resistance factor is calculated to consider location of braced angles and degree of interference for spacing ratio.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.335-340
• /
• 2013

Purpose: This study was performed to develop a lateral flow strip sensor for the detection of pathogenic Escherichia coli O157:H7 in various samples. Also, feasibility of using an image analysis method to improve the interpretation of the strip sensor was evaluated. Methods: The lateral flow strip sensor has been fabricated based on nitrocellulose lateral-flow membrane. Colloidal gold and E. coli O157:H7 antibodies were used as a tag and a receptor, respectively. Manually spotted E. coli O157:H7 antibody and anti-mouse antibody on nitrocellulose membrane were used as test and control dots, respectively. Feasibility of the lateral flow strip sensor to detect E. coli O157:H7 were evaluated with serially diluted E. coli O157:H7 cells in PBS or food samples. Test results of the lateral flow strip sensor were measured with an image analysis method. Results: The intensity of the test dot started to increase with higher concentration of the cells were introduced. The sensitivities of the sensor were both $10^4$ CFU/mL Escherichia coli O157:H7 spiked in PBS and in chicken meat extract, respectively. Conclusions: The lateral flow strip sensor and image analysis method could detect E. coli O157:H7 in 20 min, which is significantly quicker than conventional plate counting method.

• Clinical and Experimental Pediatrics
• /
• 제51권10호
• /
• pp.1071-1076
• /
• 2008

목적: RSV 호흡기 바이러스 감염은 해마다 영유아에서 심한 호흡기 질환의 중요한 원인이 되고 있다. 이에 따라 최근 검사 방법이 간편하고 결과를 빨리 알 수 있는 면역 크로마토그래피법이 신속 항원 검사법으로서 소개되어 그 정확성과 임상에서의 유용성이 많이 연구되고 있으나 국내에서는 연구례가 드문 실정이다. 이에 저자들은 이 검사법의 정확성과 유용성을 평가하여 실질적인 검사법으로 정착시키고자 하였다. 방법: 2007년 4월부터 2008년 3월까지 발열, 기침, 천명, 호흡곤란, 빈호흡 등의 증상으로 외래 내원 및 입원치료를 받은 112명의 환아를 대상으로 비인두 가검물을 채취하여 RSV Respi-Strip과 효소 면역 측정법, RT-PCR(ASTEC)을 동시에 시행하였다. RT-PCR을 표준으로 하여 RespiStrip 과 EIA의 결과를 비교 분석하여 정확성과 유용성을 평가하였다. 결 과: RSV RespiStrip, RT-PCR, EIA에 양성을 보인 환아는 각각 42명, 45명, 39명 이었다. RespiStrip는 RT-PCR 검사법에 대하여 민감도 88%, 특이도 94%, 양성 예측도 90%, 음성 예측도는 92% 였으며 위양성률과 위음성률 그리고 일치도가 각각 5.9%, 11%, 83% 로 나왔다. EIA는 RT-PCR 검사법에 대하여 민감도 84%, 특이도 94%, 양성 예측도 90%, 음성 예측도 90%, 일치도 79% 로 나왔다. 결론: 신속 항원 검사가 비교적 민감도가 높으므로 RSV 감염의 선별 검사로서 적합하다고 생각한다. 외래 진료실에서 빠르고 경제적이며 간편하게 검사하여 조기에 적절한 치료를 함으로써 합병증을 예방할 수 있고 아울러 불필요한 항생제의 사용을 줄일 수 있다. 앞으로 이러한 신속검사가 실제 임상에서 많이 적용되리라 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.167-167
• /
• 2000

This study aims at the development of REC sensor causing the gauge error in the hot strip rolling process, and the improvement of the hydraulic AGC (Automatic Gauge Control) system. The gauge error outbreaks from the various reasons, however, mainly the roll eccentricity is considered to cause a such kind of error. In the study, the REC (Roll Eccentricity Control System) sensor is designed using sensor An On - line test of the system shows the comprehensive effects of controlling the gauge error of the hot strip. On - Line test shows the possibility of enhancing the accuracy for gauge.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 토목섬유(Geosymthetics) 학술발표회 논문집
• /
• pp.29-42
• /
• 1996

• 분석과학
• /
• 제25권6호
• /
• pp.388-394
• /
• 2012

남조류 독소인 마이크로시스틴은 여름철 우리나라 여러 호수들에 존재하여 물고기와 가축 그리고 인간에게 강한 독성을 나타내는 독소이다. 지금까지는 남조류독소인 마이크로시스틴을 분석하기 위하여 HPLC를 사용하거나 ELISA 분석법을 이용하였으나 본 연구에서는 대량배양을 통해서 얻어진 남조류들 속에 미량존재하는 마이크로시스틴을 분석하기 위해 스트립을 이용하는 새로운 분석방법을 시도하였다. 이 분석법은 항원-항체기술을 이용하여 높은 특이도(specifisity)와 테스트 스트립(test strip)의 신속성, 그리고, 형광리더(reader)의 고감도(sensitivity) 분석능력 등의 장점을 이용하였다. 따라서 새로 개발된 분석법을 이용하면 다양한 물시료속에 존재하는 마이크로시스틴을 독소 표준품 없이 단시간에 고감도로 분석할 수 있다.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.23-35
• /
• 2017

Current form of Corrugated-strip connectors are not popular due to the fact that the two ends of this form need to be welded to steel face plates. To overcome this difficulty, a new system is proposed in this work. In this system, bi-directional corrugated-strip connectors are used in pairs, and only one of their ends is welded to the steel face plates on each side. The other end is embedded in the concrete core. To assemble the system, common welding devices are required, and welding process can be performed in the construction sites. By performing the Push-out test under static loading, the authors experimentally assess the effects of geometric parameters on ductility, failure modes and the ultimate shear strength of the aforesaid connectors. For this purpose, sixteen experimental samples are prepared and investigated. For fifteen of these samples, one end of the shear connectors is welded to steel face plates, and the other end is embedded in the concrete. Another experimental sample is prepared in which both ends are welded to the steel face plates. According to the achieved results, several relations are proposed for predicting the ultimate shear strength and load vs. interlayer slip (load-slip) behavior of corrugated-strip connectors. Moreover, these formulas are compared with those of the well-known codes and standards. Accordingly, it is concluded that the authors' relations are more reliable.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.299-307
• /
• 2013

The value of blood sugar is measured by a personal blood glucose meter which consists of two parts: a glucose strip and a blood glucose meter. A personal blood glucose meter makes use of electric media which are composed of glucose oxidase and electron. This study is to propose a method of reliability demonstration test derived from field data analysis and FMEA(Failure Mode and Effect Analysis). Detailed Conditions for reliability demonstration test are selected from the comparison of various failure mechanisms. The most dominant failure mechanism is wear-out which is caused by strip insertion/extraction. The testing device that can reproduce the failure mechanism of strip insertion/extraction is made to conduct reliability demonstration test. Using the testing device, it is confirmed that target lifetime of selected devices is more than 2 years.