• 전기학회논문지
• /
• 제63권2호
• /
• pp.291-296
• /
• 2014

Most of the statistical signal analysis processed in the time domain and the frequency domain are based on the assumption that the signal is weakly stationary(wide sense stationary). Therefore, it is necessary to know whether the surface EMG signals processed in the statistical basis satisfy the condition of weak stationarity. The purpose of this study is to analyze the accuracy of the Run-test, modified Run-test, RA(reverse arrangement)-test, and modified RA-test for assessing surface EMG signal stationarity. Six stationary and three non-stationary signals were simulated by using sine wave, AR(autoregressive) modeling, and real surface EMG. The simulated signals were tested for stationarity using nine different methods of Run-test and RA-test. The results showed that the modified Run-test method2 (mRT2) classified exactly the surface EMG signals by stationarity with 100% accuracy. This finding indicates that the mRT2 may be the best way for assessing stationarity in surface EMG signals.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.195-201
• /
• 2019

유산소성 운동수행능력의 필드테스트로 대표되는 셔틀런 테스트와 요요테스트를 최대산소섭취량 및 다른 주행테스트들과 비교 검토함으로써 대학 축구선수들의 심폐지구력을 평가하는 유효한 필드테스트를 제안하는 것을 목적으로 하였다. 셔틀런 테스트는 휴식구간이 없이 지속적으로 달려야 하는 반면 요요 테스트의 경우 휴식구간이 설정되어 있어 휴식기를 활용하여 컨디션을 조절하며 주행한다는 특성이 있다. 따라서 요요테스트는 주행과 회복을 반복하는 간헐적 운동을 주로 하는 축구선수들의 종목 특성을 고려한 심폐기능 평가 시 보다 효율적인 현장검사로 활용될 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1128-1133
• /
• 2014

Most of the statistical signal analysis processed in the time domain and the frequency domain are based on the assumption that the signal is weakly stationary(wide sense stationary). Therefore, it is necessary to know whether the surface EMG signals processed in the statistical basis satisfy the condition of the weak stationarity. The purpose of this study is to find optimal segment length of surface EMG signal for assessing stationarity with the modified Run-test and RA-test. Ten stationary surface EMG signals were simulated by AR(autoregressive) modeling, and ten real surface EMG signals were recorded from biceps brachii muscle and then modified to have non-stationary structures. In condition of varying segment length from 20ms to 100ms, stationarity of the signals was tested by using six different methods of modified Run-test and RA-test. The results indicate that the optimal segment length for the surface EMG is 30ms~35ms, and the best way for assessing surface EMG signal stationarity is the modified Run-test (Run2) method using this optimal length.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.718-723
• /
• 2003

The number of jet aircraft is increasing. The aircraft noise making people near airports nervous have become a serious social problem. The aircraft noise can be classified into two groups; noise being generated at take-off or landing and noise form run-up test on the ground. In this paper, we consider the aircraft noise from run-up test on the pound and we suggest the noise suppression system.

• 음성과학
• /
• 제10권1호
• /
• pp.95-105
• /
• 2003

This paper describes a new parameter for voice activity detection which serves as a front-end part for automatic speech recognition systems. The new parameter called run-ratio is derived from the runs test statistic which is used in the statistical test for randomness of a given sequence. The run-ratio parameter has the property that the values of the parameter for the random sequence are about 1. To apply the run-ratio parameter into the voice activity detection method, it is assumed that the samples of an inputted audio signal should be converted to binary sequences of positive and negative values. Then, the silence region in the audio signal can be regarded as random sequences so that their values of the run-ratio would be about 1. The run-ratio for the voiced region has far lower values than 1 and for fricative sounds higher values than 1. Therefore, the parameter can discriminate speech signals from the background sounds by using the newly derived run-ratio parameter. The proposed voice activity detector outperformed the conventional energy-based detector in the sense of error mean and variance, small deviation from true speech boundaries, and low chance of missing real utterances

• 통상정보연구
• /
• 제8권2호
• /
• pp.299-312
• /
• 2006

This study examines the relations among wage differentials, trade, and productivity in Korea, using the methodology of Granger causality and vector error correction modelling. Cointegration test results over the 1975-2004 period indicate that all the test variables are cointegrated. Therefore, wage differentials, trade, and productivity are all related in the long run. We found some evidence on long-run relationship, while there is no short-run relationship between three test variables. First, trade and wage differentials have positively and bi-directionally Granger causality in the long-run. Second, productivity Granger causes negatively wage differentials in the long-run. Finally, productivity Granger causes positively trade in the long-run. These results explain partially the current theoretical predictions for wage inequality as well as supports the productivity-led growth hypothesis in the Korean economy.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.139-154
• /
• 2021

This study's impetus is to explore fresh evidence to answer the question, i.e., whether remittances asymmetrically influence financial development in Bangladesh from 1975 to 2019. The study employs several tests, i.e., nonlinear unit root test, Autoregressive Distributed Lagged (ARDL), NARDL, and asymmetric causality test for establishing the pattern of association. Nonlinear unit root tests confirm that variables follow a nonlinear system of being stationary after the first difference. nonlinearity among variables is investigated by performing the BDS test and nonlinear OLS. Directional causality is investigated through both linear and nonlinear effects of remittance inflows by following the non-granger casualty test. The test statistics of Fpass and tBDM showed the Long-run cointegration in the empirical model and positive effect running from remittances inflow to financial development both in the long-run and short-run. Furthermore, the results of a standard Wald test divulge the presence of long-run and short-run asymmetry. Asymmetry causality test established unidirectional causality due to positive and negative shocks in remittances inflows to Bank-based financial development and feedback hypothesis hold for explaining causality between positive and negative shocks in remittance inflows and Stock-based financial development.

• 물과 미래
• /
• 제18권4호
• /
• pp.317-325
• /
• 1985

본 연구에서는 낙동강, 한강 및 금강의 중요관측지점의 월평균 유출량을 분석에 사용하였으며, 먼저 일정유량(Truncation level) 별로 Run-length와 Run-sum에 대한 2-변수 Gamma 분포 및 대수정규분포의 적합성 여부를 검토하였던 바 Gamma 모델이 적합한 것으로 판명된 자료와 실측치와 비교하였다. 그리고 Run-length 및 Run-sum에 대한 일정유량별로 평균치의 변화에 대한 성질을 구명하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.156-162
• /
• 2013

This paper measures the hot spot temperatures in a single-phase, 154 kV, 15/20 MVA power transformer filled with natural ester fluid using optical fiber sensors and compares them with those calculated by conventional heat run tests. A total of 14 optical fiber sensors were installed on the high-voltage and low-voltage windings to measure the hot spot temperatures. In addition, three thermocouples were installed in the transformer to measure the temperature distribution during the heat run tests. In the low-voltage winding, the hot spot temperature was $108.4^{\circ}C$, calculated by the conventional heat run test. However, the hot spot temperature measured using the optical fiber sensor was $129.4^{\circ}C$ between turns 2 and 3 on the upper side of the low-voltage winding. Therefore, the hot spot temperature of the low-voltage winding measured using the optical fiber sensor was $21.0^{\circ}C$ higher than that calculated by the conventional heat run test.