• Journal of the Korean Society of School Health
• /
• v.16 no.2
• /
• pp.85-95
• /
• 2003

This paper surveys and researches primary school students' situation of their school life. The purpose of this paper is to propose the basic information of the accident prevention teaching and the safety management in order to avoid accidents to occur beforehand. We selected m primary students out of the six primary schools in Taebaek City at which the nursing students of Kangwon Tourism College practiced school health. We used SPSS Win for analyzing data. We carne up with the general characteristics and percentage using frequency analysis, mean and standard deviation of each item, the mean difference using T-Test, and the different factors using one-way analysis. The results are as follows: 1. The 6th grade students don't practice safety procedures than the 5th grade students during outside the school. The older the student is, the less it practices safety procedures. 2. Boys practice safety procedures better than the girls during inside and outside the school. 3. Hot -tempered students don't practice safety procedures properly. 4. Most of the students who often use the health room of the school have high scores in safety procedures test and as a result, these students practice safety procedures thoroughly. 5. The grade of safety living activity is the highest during gymnastic class. Next is when the students use the stairs when they are going up and clown. Then, the use of science room In the playground is the lowest grade of safety for living activity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.781-786
• /
• 1999

One of the major causes of concrete pavement deterioration is the loss of support due to erosion and pumping of subbase and subgrade. In this study, procedures for the detection of voids under concrete pavement slab are presented using nondestructive test method such as FWD(Falling Weight Deflectometer) and GPR(Ground Penetration Radar). The deflection responses of concrete slab obtained in FWD field test are analysed for determining the presence of void. Also, reflection responses in GPR test are interpreted. It was concluded that these procedures are available for detecting the viods under concrete pavement slab.

• Journal of the Korean Statistical Society
• /
• v.11 no.2
• /
• pp.109-117
• /
• 1982

In this paper, a preliminary study is performed on the subset selection procedures which are based on the trimmed means and the Hodges-Lehmann estimator derived from the Wilcoxon test. The proposed procedures are compared to the Gupta's rule through a small smaple Monte Carlo study. The results show that the procedures based on the robust estimators are successful in terms of efficiency and robustness.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.628-630
• /
• 2003

Synthetic Aperture Radar(SAR) is an active microwave instrument that performs high-resolution observation under almost all weather condition. Research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. In fact, many complicated steps are involved in order to generate a SAR image product. The purpose of this paper is to derive quality assessment procedures and define important test parameters in each procedure inside a SAR processor. Thus those test parameter values indicate the quality of SAR image products and verify the processor's performance. Moreover, required procedures to correct and handle errors which are indicated during the assessment are also presented.

• IE interfaces
• /
• v.6 no.1
• /
• pp.55-65
• /
• 1993

A nonstandard instrument used in the filed frequently becomes out-of-calibration due to environmental noise, misuse, aging, etc. A substantial amount of loss may result if such nonstandard instrument is used to check product quality and performance. Traditional periodic calibration at the calibration center is not capable of detecting out-of-calibration status while the instrument is in use, and therefore, statistical methods need to be developed to check the status of a nonstandard instrument in the field between calibrations. Developed in this paper is a unified measurement assurance model in which statistical calibration at the calibration center and measurement assurance test in the filed are combined. We developed statistical procedures to detect changes in precision and in the coefficients of the calibration equation. Futher, computational experiments are conducted to evaluate how the power of test varies with respect to the parameters involved. Based upon the computational results we suggest procedures for designing effective measurement assurance tests.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.947-957
• /
• 2008

Two-arm non-inferiority trials is often applied to parametric procedure suggested by Hauschke et al. (1999). Since this design does not allow a direct comparison of a new treatment group with placebo group, parametric procedure in a three-arm non-inferiority trial with a placebo group was suggested by Pigeot et al. (2003). But, procedures in these designs are necessary for distribution assumptions. Therefore we propose, in this paper, non parametric procedures employing Wilcoxon rank sum test in a two-arm design and linear contrast test suggested by Scheirer et al. (1976) in a three-arm design. The proposed nonparametric procedures and parametric procedures are compared by Monte Carlo simulation study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.659-675
• /
• 2006

Recently, significant progress has been made in performance-based engineering methods that rely mainly on nonlinear static seismic analysis procedures. The Capacity Spectrum Method (CSM) and the Displacement Coefficient Method (DCM) are the representative nonlinear static seismic analysis procedures. In order to evaluate the applicability of the procedures to the seismic evaluation and design process of new and existing structures, the accuracy of both CSM and DCM should be evaluated in advance. The accuracy of seismic responses by the nonlinear static procedures is evaluated in comparison with the shaking table test results for the structural wall specimen subjected to the far field and near field earthquakes. Also conducted are comparative studies where the shaking table test results are compared with those from nonlinear dynamic analysis procedures, i.e., Single-Degree-of-Freedom (SDOF), equivalent SDOF and Multi-Degree-of-Freedom (MDOF) systems.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.981-994
• /
• 2017

Purpose: In this study, the reliability growth management procedures for armed vehicle is suggested and an illustrative case study of launcher system is given. Methods: Crow-AMSAA model is adopted to manage reliability growth of armed vehicle using failure data acquired from development test phase to field operation phase. Between the development test phase and the production phase, the suggested reliability growth procedures for armed vehicle entails accelerated life test of the selected module whose design is changed to improve its reliability for assuring the target system reliability. And it can be verified through estimating the system reliability based on the failure data of field operation phase. Results: It is shown that the proposed reliability growth management procedures are effective for armed vehicle based on the case study of launcher system. After estimating the reliability of launcher system at every development test, some items are selected to change their designs for improving reliability. Accelerated life test is performed to prove the reliability improvement and finally it is verified through the field operation. Conclusion: The reliability growth management procedures for armed vehicle is suggested and the case study of launcher system shows it can be effective for managing the reliability growth of the armed vehicle.

• Journal of Information Technology Services
• /
• v.5 no.3
• /
• pp.99-108
• /
• 2006

Public institutions are considering adoption of open-source software in the process of information projects. However, there doesn't exist reliable information about an adoption process for open-source software. Performance and stability problems of this software also persist, as a result, current open-source software is not widely used. As a software market and industry grows, Benchmark test has been performed more often than before in order to help customers understand and select the most appropriate product among myriad similar ones. It is certain that more objective and trustful data evidence should be obtained by way of utilizing the procedures and methods of Benchmark Test in decision making process for selecting an open-source software. For this research, Benchmark test was applied as a way of demonstrating performance verification of an open-source software in the public institutions. It is certain that more objective and trustful data evidence should be obtained by way of utilizing the procedures and methods of Benchmark Test in decision making process for selecting an open-source software. It also introduces a case study of a information system, which selected and implemented open-source software, in order to confirm the validity of this research. This research will serve as a guideline to adopt open-source software in governments as well as public institutions.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.575-584
• /
• 1997

The quality of periodontal instrument cutting edge is a basic element of effective root planing procedure. Using instruments, the sharp edge is changed into blunt or beveled edge. With the blunt instrument, the periodontal treatment can't be carried into accuracy and effective. The study on the wear of periodontal curet is insufficient, there are few publications about the change of sharpness of cutting egde after using instrument and a certen reports were published on the study of scanning electron microscope(SEM) examination. In this study, to declare the number of strokes for sharpening of instruments, the changes of cutting edge is measured by the clinical methods, tactile sensitivity examination and refraction light-white line test after scaling strokes and root planing strokes. SEM test was added for defined the changes of cutting edges. The 7/8 Gracey curets that have been never used was tested. Maxillary molars which were extracted from the School of Dental Medicine, Dankook University was used. Subjected teeth had attachment loss more than 6 mm in bucca-lingual surface and sufficient calculus of a band type in cervical area. The strokes of curet were executed 3, 5, 7, 9, 11, 13 times on scaling stroke and 10, 15, 20, 25, 30, 35 times on root planing stroke. A resident has periodontal experience over 3 years carried out the clinical examinations those tactile sensitivity examination and refraction light-white line test 5 times. The case there being tactile sensitivity certenly is 2, the case being felt tactile sensitivity is 1, and the case there not being tactile sensitivity is 0. The visual examination was recorded as following. The case that refracted white line is not recognised is 2, the case that uncerten is 1, and the case that acknowledged is 0. The results were obtained as follows. 1. After scaling strokes, the tactile sensitivity was reduced after 11 strokes and disappeared in 13 strokes. 2. In tactile sensitivity after root planing procedures, sensitivity was reduced after 25 strokes and disappeared in 35 strokes. 3. In case of visual examination, the detection of refracted white line was increased after 9 strokes of scaling procedures and the accuracy of wear wasn't showed after root planing procedures. 4. In SEM, metal projection was observed on new periodontal curet cutting edge and it was disappeared after scaling procedures. 5. In SEM, the cutting edge was showed changing linear into an aspect of the surface after 5 strokes of scaling procedures and 10 strokes of root planing procedures and showed beveled edge in 11 strokes of scaling procedures, 25 strokes of root planing procedures. The results of 3-type examination indicated that the sharpening of curet should be performed after 11 strokes of scaling procedures and 25 strokes of root planing procedures.