• Journal of Korean Home Economics Education Association
• /
• v.6 no.1
• /
• pp.73-92
• /
• 1994

The purpose of this study is to investigate the need of home economics education on high School male students for purpose, the questions raised in this study are as follows. 1. Does home economics education on high school male students needs\ulcorner and are whether not or home economics education on high school male students need different according to sex, age, edu-cation, income, occupation\ulcorner 2. If home economics education on high school male students need or not. What is the reason of that\ulcorner and are the reason of that different according to sex, age, education, income, occupation\ulcorner 3. If home economics education on high school male students need, what is the contents of home economics education and are that different according to sex, age, education, income, occupation\ulcorner The subjects of the study consisted of 183 men and women in Ch’ong ju City(over 21 years old) The data were analiged by statistical procedures such as frequency, X(sup)2, oneway ANOVA, two-way ANOVA, Duncan’s Multiple Range Test. The major results of the study were summarized as follow: 1. The response rate on home economics education on high school male students was absolutely high(91.8%). of demographic variables, the only sex appeared the significant differences. the men groups responsed higher not to need than the women groups. 2. As the reasons of home economics educations on high School male students needing the respons of the highest response rate were that ‘as family community, family members understant, cooperated, and are responsible with each other or one anther’and that ‘as society becomes in-dustrial gradually, family members have to have the accurate perception, or attitudies on home life’of demographic variables, sex, income, and occupation appeard the significant differences. In the contrast of that, as the reaspon of home economics education on high school male stu-dents not needing, the reasons of the highest. response rate were that ‘as sex, the role is different’and that ‘home economics education needs not essentially to learn through the school education’. and there were not differences according to demographic variables. 3. As home economics education contents for high school mal students, the most need content part was child part. the second content part was family development and family relationships part. There was the significant differences according to all the demographic variables. Particulary, the lower the lever of education, in come and occupation were, the less the degree of need on all content part was.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.616-622
• /
• 1999

The primary objective of pulp treatment is to maintain the integrity and health of the oral tissues. The most important and difficult aspect of pulp therapy is determining the health of the pulp, or its stage of inflammation, so that a decision can be made regarding the best form of treatment. Immature permanent teeth are good candidates for many pulp healing procedures, due to their rich blood supply, which is believed to enhance the pulp's ability to react successfully to various insults. Healing was considered to have taken place when the tooth fulfilled the following criteria: 1. Abscence of clinical symtoms 2. Radiographic evidence of dentin bridge formation 3. No intrapulpal or periapical pathosis was evident radiographically 4. Continued root development and closure of the apex in immature teeth 5. Normal dentin apposition in mature teeth 6. Positive response to electrical pulp test This presents a report of cases in which immature permanent teeth, pulp-exposed by caries or trauma, was treated successfully by partial pulpotomy.

• Physical Therapy Korea
• /
• v.5 no.3
• /
• pp.72-87
• /
• 1998

This study examined the rates of spinal abnormal curvature and the correlation of the Body Mass Index (BMI), Low Back Pain (LBP) and spinal curvature by measuring scoliosis, kyphosis, and lordosis in university students. The study population included 67 male, 92 female university students, making a total of 159, in Wonju City. Spinal curvature was measured by an electrogoniometer in a computerized skeletal analysis system. Lateral curvature of spine of more than 10 degrees was considered as nonspostural scoliosis. The correlation of BMI, LBP and the spinal curvature was analysed by Pearson's correlation coefficient and t-test. The following results were obtained: 1. The overall incidence and rate of scoliosis in cases with a greater than 10 degree curve in males was an incidence of 8 and a rate of 11%. In females the incidence was 36 and the rate 39.2%. 2. The overall incidence and rate of kyphosis of less than 20 degrees in males was a rate of 9 and an incidence of 11.9%. In females, the rate was 5 and the incidence 5.4%. In kyphosis cases of more than 40 degrees, the male rate was 5 and the incidence 7.7%. For female the rate was 13 and the incidence 14.2%. 3. The overall incidence and rate of lordosis with curves of less than 20 degrees was a rate of 6 for males and an incidence of 9.0%. For females, the rate was 5 and the incidence 5.4%. In cases of more than 50 degrees lordosis, the female rate was 2 and the incidence 2.2%. There were no males in this category. 4. There was a negative correlation between kyphosis and BMI. The greater the kyphotic curve, the less the BMI in males (p<0.05). There was no significant BMI difference by gender in either scoliosis or lordosis. There was, however, a significantly decreased sacral angle in the female group with LBP. The results of this study cannot be generalized to the general population because the subjects were all from one university. The measurements were quite reliable because the angles determined by the Metrocom System were highly correlated with radiologic findings. This study shows the need for a regular screening system for spinal curvatures in university health examination procedures.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.609-621
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

• Clean Technology
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2008

In order to choose alternative environmental-friendly cleaning agents, it is very important in the present point that the systematic selection procedures should be introduced and applied to the industry through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. Thus, a novel cleaning evaluation method utilizing optically stimulated electron emission (OSEE) among various methods of cleaning ability was studied in this study. The contaminants used in this cleaning experiments were flux, solder, grease, cutting oil, and mixed soil of 35% grease and 65% cutting oil. The cleaning agents developed or prepared in our laboratory were employed and their cleaning ability were comparatively evaluated by the OSEE, gravimetry and contact angle methods. The experimental results in this work showed that flux cleaning efficiency measured by the OSEE method was similar to that of the gravimetric method, but that the OSEE method could not be compared with gravimetric method for the case of solder or grease cleaning because the contaminants radiate or absorb ultra-violet light. In case of cutting oil cleaning, the gravimetric method indicated its limitation of cleaning efficiency of cutting oil since it showed cleaning efficiency of 100%, even though residual soil remaining on the substrate surface a little after its cleaning. The comparative experimental results of cleaning ability evaluated by the OSEE- and contact angle measurement methods showed that they were similar in case of cleaning of flux, mixed soil and cutting oil. It was judged that the contact angle measurement method could evaluate the cleaning ability more precisely than the OSEE method for cleaning solder and grease.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.753-761
• /
• 2005

In this study, pretreatment of organic matters with $MIEX^{(R)}$ was evaluated using bench-scale experimental procedures on four organic matters to determine its effect on subsequent UF membrane filtration. For comparison, coagulation process was also used as a pretreatment of UF membrane filtration. Moreover, the membrane fouling potential was identified using different fractions and molecular weights of organic matters. From the removal property of MW organic matters by coagulation process for the sample water NOM and AOM, the removal efficiency of high MW organic matters were much higher than those of low MW organic matters. It was shown that the removal efficiency of high MW organic matter more than 10 kDa was lower than that of low MW organic matter for $MIEX^{(R)}$ process. For the change of permeate flux by the pretreatment process, $MIEX^{(R)}$+UF process showed high removal efficiency of organic matter as compared with coagulation-UF processes, but high reduction rate of permeate flux was presented through the reduction of removal efficiency of high MW organic matter. From sequential filtration test results in order to examine the effect of MW of organic matter on membrane fouling, it was found that the membrane foulant was occurred by high MW organic matter, and the DOC of organic matter less than 0.5 mg/L was working as the membrane foulant. In the case of sample water composed of low MW organic matter less than 10 kDa, since the low MW organic matter less than 10 kDa has high removal efficiency by $MIEX^{(R)}$, low reduction rate of permeate flux is obtained as compared with coagulation-UF processes. In summary, it is required to conduct the research on physical/chemical characteristic of original water before pretreatment process of membrane process is selected, and a pertinent pre-treatment process should be employed based on the physical/chemical characteristic of original water.

• Journal of Distribution Science
• /
• v.16 no.9
• /
• pp.65-77
• /
• 2018

Purpose - A trading area is very closely related to consumer life. A trading area is a cultural and social space that consumes culture and promotes human relationships as well as an economic space where consumers live their daily lives. In this context, a trading area research should be conducted objectively and empirically because it deals with the activities of consumer's life. The purpose of this study is to identify the intrinsic psychological motivation(push motivation) caused when consumers visit a trading area and to demonstrate how the push motivation for a trading area influence on consumer's flow, satisfaction, revisit intention. Research design, data, and methodology - In order to develop research hypotheses for this study, the development procedures for push motivation scale are as follows; (1) generating initial pool of items based on previous studies, (2) expert judgement to evaluate content and face validity, and (3) assessing convergent and discriminant validity using confirmatory factor analysis. In order to achieve these purposes, online surveys were conducted on frequent or familiar visitors to the trading areas around the Gangnam, Kunkuk University and Hongik University Station. Among the 1,343 questionnaires collected, 1,157 cases were analyzed by using SPSS 22.0 and SmartPLS 3.0 statistical package program, except for 186 responses in which responses were judged to be unfaithful. Results - The push motivation was classified into five sub-dimensions of excitement/stimulus, rest/relaxation, exit/refreshing, knowledge/learning and human relationship promotion as multidimensional and complex factors composed of individual and social-related dimensions. The excitement/stimulus and human relationship promotion of push motivation have positive effects on satisfaction. However, all dimensions of the push motivation have positive effects on flow. And flow has a positive effect on satisfaction and revisit intention. Meanwhile, the mediation test using boostrapping shows that flow plays a full mediating role in the relationship between rest/relaxation, exit/refreshing, knowledge/learning and satisfaction, but a partial mediating rol e between excitement/stimulus, human relationship promotion and satisfaction. Finally, satisfaction plays a partial mediating role between flow and revisit intention. Conclusions - This study shows that the push motivation is multidimensional and compositive depending on the situation of a consumer. In addition, it is found that the human relationship promotion(a social-related motivation) has a much more important effect on flow and satisfaction than other push motivations of individual dimensions. It also shows that satisfaction increases when consumers are being flowed at their visit and degree of revisit intention also grows as satisfaction increases. As implications of this study, a marketer should try to understand consumer's visit motivation at first and then develop factors that increase their flow, satisfaction, revisit intention. It also requires a marketer to approach subjects on a trading area more objectively and empirically based on the psychology and behavior of consumers, in order to establish a proper and efficient strategy on development of a trading area.

• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.591-604
• /
• 1996

The surgical hand scrub (SHS) is the single most important procedure in the prevention of post-operative wound infections and yet it remains the most violated of all infection control procedures. The purpose of this study was to gain an overview of SHS habits in operative th atre personnel and to determine knowledge and attitudes to identify whether there is a need for improvement. The subjects for this study included 79 doctors and 94 nurses working in the operative th atres of four hospitals in Incheon City and Kyungki Province. Related data were collected from July 25 to August 10, 1995 by the author. The data were analyzed using descriptive stat-istics and Chi-squre test. The results of the study are summarized as follows : 1. Nurses felt that they conducted SHS for a longer period of time than doctors did(X=20.1, P=.005). 2. Nurses and doctors had some knowledge of slip-ping rings off fingers and the length of nails, but they lacked knowledge on the duration of SHS, handwashing after an operation and on manicure. 3. There were many reasons given for insufficient SHS included : 1) because they were so busy (38%). 2) brushes were too harsh(19.7%). 3) operations were very simple(18.7%). 4) surgical latex gloves provide functional barrier(11.6%). 5) SHSs were troublesome(7.4%) 6) there were no clocks near the sinks(2.5%) and 7) the operative patients were administered antibiotics after operartion(2.1%). 4. Most of nurses and doctors considered SHS to be important in prevention against post operative infections. 5. Nurses were found to do a thorough SHS, but residents were found to neglect SHS. 6. Considering prevention against postoperative infections, most nurses and doctors considered aseptic techniques, environment-sanitary management and SHS more important than the use of antibiotics, the resistance of patients or the method of operation. 7. Half of the nurses and doctors(54.3%) considered surgical latex gloves to function well as a barrier. 8. Half of the nurses (56.4%) and doctors(51.9%) learned SHS as part of the curriculum in their school education and the rest(nurses : 95.7%, doctors : 74.7%) learned SHS as part of their In Service Education. In conclusion, these findings suggest a need to develop an educational program on surgical hand scrub and hospital infection control for surgical personnels, to install clocks near the hand scrub sinks, to consider a violation report for negligent surgical hand scrubs, and to develop a soft brush for hand scrubs in order to increase performance of the surgical hand scrub.

• Child Health Nursing Research
• /
• v.8 no.3
• /
• pp.260-271
• /
• 2002

This study was performed to identify the level of stress recognized by the parents as a support system for their infant patients who were hospitalized in an emergency department, thus to provide the resulting data as the basic material of care intervention for the families of infant patients. This study subjected the parents with infant patients who were hospitalized in emergency department of C University Hospital in Daejeon, and the data was collected from questionnaires for them, dating from Mar. 20, to Jun. 24, 2001 This study used the tool(30 questions) which was originally developed by Ji, Dong-ok (1992) for measuring the stress of families of infant patients in emergency room, and then was modified and complemented by this researcher suitably for infant patients. Collected data was statistically analyzed with frequency, percentage, mean, standard deviation, t-test, ANOVA, by using SPSS WIN10.0 program, and the results were as follows: 1. The stress of parents with infant patients hospitalized in emergency department averaged 3.31 on the basis of 5-point measure, which means that they felt stress beyond means. 2. The factor with high average out of stress factors the parents of infant patients recognized included the followings: 'about the pain of infant patients due to examination(3.91±1.00)'; 'about rare opportunity to be in contact with physician(3.78±1.09)'; 'delay in emergent treatment required for infant patients(3.75±1.31)'; 'delay in the general treatment of infant patients(3.72±1.32)'. Factors of the stress level includes the followings: 'care and medical treatment'(3.46±.72); 'body and diseases'(3.41±.97)'; 'lack of information and supportable resources (3.25±.77)'; and so on. 3. For the stress level according to general characteristics, there were statistically significant differences in the result of the condition of infant patients, medical treatment(P<.01), religion, the procedure of treatment(P<.05). With little preceding studies for infant patients hospitalized in emergency department, this study looked through the level of stress recognized by the parents of infant patients. Based on the comprehension on the parents with infant patients and the knowledge on stress factors recognized by the parents, it is expected that we can seek the methods of care intervention such as explanation of care and treatment procedures, unit policies, continuous interest and emotional supports as well as the provision of information to understand the responses of parents and reduce accompanied stresses.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.496-502
• /
• 2015

Hydrocarbon dew point(HCDP), a property which is the most generally used for describing natural gas condensation, is a very important parameter of natural gas quality specifications. HCDP is strongly influenced by the concentration of the heavier hydrocarbon components, especially $C_6+$, so, along with compliance with gas quality specifications, build up of procedures for obtaining accurate HCDP is essential for gas transmission company, because hydrocarbon condensation present may cause serious operational and safety problems. This study has been carried out in an attempt to measure HCDP accurately by the automatic hydrocarbon dew point meter under the actual field conditions. Measured HCDP also has been compared with calculated HCDP using the composition determined by gas chromatograph and industry accepted equation of state at multiple pressures, along with the cricondentherm. The test results are 1) the automatic hydrocarbon dew point meter was able to measure stable HCDP continuously 2) the automatic hydrocarbon dew point meter has been performed reference measurement by pure propane with a known dew point from literature, and 3) A meaningful differences was observed when comparing the automatic hydrocarbon dew point meter and gas chromatograph results for synthetic standard gas mixtures and real gas mixtures.