• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.689-696
• /
• 2003

Recently, Appendix A of ACI 318∼02 Code introduced the Strut-and-Tie Model(STM) procedure in shear design of deep flexural members. The STM procedure is widely used in the design of concrete regions where the distribution of longitudinal strains is significantly nonlinear, such as deep beams, beams with large openings, corbels, and dapped-end beams. Experimental study included five high-strength reinforced concrete deep beams with different detailing schemes for the horizontal and vertical reinforcement. The specimens were designed as simply supported beams subjected to concentrated loads on the top face and supported on the bottom face. At failure, all specimen exhibited primary diagonal crack running from the support region to the point load. Specimens which had mechanical anchorages(terminators) gives better representation of the load-carrying mechanism than the specimen had standard 90-degree anchorage at failure in deep flexural members. Based on the test results, shear design procedures contained in the ACI 318-99 Code, Appendix A of the ACI 318-02 Code, CSA A23.3-94 Code and CIRIA Guide-2 were evaluated. The Shear design of ACI 318-99 Code, Appendix A of the ACI 318-02 Code and CIRIA Guide-2 shown to be conservative predictions from 10% to 36% in the shear strength of the single-span deep beam which was tested. ACI 318-99 Code was the lowest standard deviation.

• Journal of Korean Academy of Nursing
• /
• v.26 no.4
• /
• pp.808-819
• /
• 1996

The purpose of this study was to examine the stressors and coping strategies of school -age children and to explore the relationship between stressful life events and health symptoms and the effects of coping and trait anxiety which is theoretically considered to mediate the relationship between stress and health symptom. The study subjects consisted of 639 elementary school children in the fourth to sixth grade living in Seoul. Of the 639 subjects, 348 were boys and 291 were girls. The mean age was 11.35 (SD=.86). The Feel Bad Scale(FBS), Schoolager's Coping Strategy Inventory(SCSI), Spielberger's Trait Anxiety Scale for Children(STAIC), and Health Symptom Questionnaire (HSQ) were adapted for this study. A pilot study was undertaken to ascertain the reliability and validity of the instruments. The Cronbach alphas of FBS, SCSI, STAIC and HSQ were from .81 to .92. The Researcher and a research assistant visited the school and data were collected in the class using the questionnaire method after an explanation of the purpose and procedures was given to the children. Data collection was done during the period between Nov.25 to Dec.19, 1995. Using the SAS statistical program, percentages, t-test, ANOVA, correlation analysis, and multiple regression were used for data analysis. The result are as follows : 1. The mean score for the FBS was 204.79(range : 48-472) and there was a significant difference according to grade. The most severe stressors perceived by children were parental divorce and death or illness of family members. The most frequently experienced stressful life events were conflict with siblings and being home alone. 2. The mean score for the SCSI was 57.36(range : 9-118) and there was a significant difference according to grade. The most frequently used, and perceived as helpful, coping strategies were distraction and cognitive activities. 3. The mean score for the HSQ were 20.7(range : 0-81) and there were significant differences according to grade and sex. The percentage of the children answering that they perceived their health state as not good was 3.9%. 4. The mean score for the STAIC was 33.76 and there were significant differences according to grade and sex. 5. There was a significant relationship between stressful life events and health symptoms ( r=.53, p<.01). Also, Stressful life events were postively related with coping strategies(r=.39, p<.01). Trait anxiety was highly correlated with health symptoms(r=.72, p<.01). 6. To examine the multivariate effects of the variables to health symptoms, multiple regression was performed. Stressful life events, coping, trait anxiety, and health concerns were identified as significant variables. Explanation of the health symptoms by these variables was 56.78%. The study revealed that stressful life events correlated with health symptoms in school-age children and coping and trait anxiety had mediating effects on this relationship. The implication for nursing is that there is a need to develop supportive interventions for high risk population to decrease health problems due to stress. Also, it is recommended that a study be conducted to explore protective factors for the prevention of health problems in children.

• Journal of Korea Association of Health Promotion
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2004

Background : Since 2001 the Korean Association of Health Promotion has attempted to establish her own reference valves that can be used in her all fifteen branch laboratories instead of using those adapted from the published data or there commended data by the reagent companies supplied as inserts. However, the previous two reference values derived from the statistics(year 2001 and 2002) were need to adjust to apply to actual practice. Besides there was an unavoidable situation that the reagent has to be changed to other companies in 2002 that creates another statistical problem. Subsequently, the third attempt to derive the reference ranges of tests in KAHP to solve those problems and define common)v acceptable reference ranges was done and and reported here. Methods : Al1 the results performed during January 2, 2003 through September 30, 2003 were collected in Excel tile format. All the data include dthe necessary information such as age and sex. The age was grouped in six; baby(0-3y), children(4-l2y), adolescent(13-l8y), adult(19-S4y), younger elderly (65-79y),old elderly(oyer 80y), with references of statistics in medical informatics and WHO classification. The data were statistically analyzed with SAS 6.04 for-Gaussian distribution as the previous two occasions. None of the tests showed Gaussian distribution. These procedures had been repeated twice or three times after trimming out the results lying outside three standard deviations. Though, all the tests showed non-Gaussian distribution. Subsequently, the reference ranges were defined in the range from the point of lower 2.5% to the point of higher 97.5 %. And in case the lower range could be "0", the reference ranges were defined in the range of 0 to 95%.Results : The reference ranges of most of 56 test items were newly assigned. Also with adaptation of the recommendation of WHO etc. on fasting blood sugar, hemoglobin, cholesterol. Among these there were eight tests that needed reference ranges by the age groups and nine tests by the sex. Conclusions : The third attempt will credit more the reference range of all15 laboratories of Korean Association of Health Promotion, which will be essential part of the better service to the patient and clients to visit KAHP.

• Korean Business Review
• /
• v.12
• /
• pp.161-187
• /
• 1999

Organ(1988) has suggested that OCB should be considered an important component of job performance because citizenship behaviors are part of the spontaneous and innovative behaviors. Also it has been suggested that organizational characteristics may potentially explain many organizational behavior outcome variables(Hackman & Oldham, 1980). In recent years there has been a resurgence of interest in the validity of personality measures as a moderator between many variables and organizational outcome variables. This is largely due to the facts that first personality is difficult to control for promoting many organizational outcomes and next many researchers have found the moderating effects of personality(Brief & Aldag, 1975; Wanous, 1974). The purpose of this research is to test the moderating effects of tenure and growth needs on the relationships between organizational characteristics and OCB. To assess the moderating effects, the hierarchical regression procedures outlined by Cohen and Cohen(1983) were followed. On the basis of data from 698 teachers in Wonju province, results indicated that job variety has more impacts than any other independent variable on OCB like other studies. It is found that job variety and job identity have more impacts on courtesy and altruism in lower growth needs group than in higher growth needs group. Also it is resulted that job importance and autonomy have more impacts on sportsmanship in higher growth needs group than in lower growth needs group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.16.1-16.9
• /
• 2016

Background: The association of biomaterial combined with repair factor-like platelet-rich plasma (PRP) has prospective values. Bovine-derived xenograft has been identified as an osteoconductive and biocompatible grafting material that provides osseointegration ability. PRP has become a valuable adjunctive agent to promote healing in a lot of dental and oral surgery procedures. However, there are controversies with respect to the regenerative capacity of PRP and the real benefits of its use in bone grafts. The purpose of this study was to assess the influence of PRP combined with xenograft for the repair of peri-implant bone defects. Methods: Twelve rabbits were used in this study, and the experimental surgery with implant installation was performed simultaneously. Autologous PRP was prepared before the surgical procedure. An intrabony defect (7.0 mm in diameter and 3.0 mm deep) was created in the tibia of each rabbit; then, 24 titanium dental implants (3.0 mm in diameter and 8.5 mm long) were inserted into these osteotomy sites. Thus, a standardized gap (4.0 mm) was established between the surrounding bony walls and the implant surface. The gaps were treated with either xenograft alone (control group) or xenograft combined with PRP (experimental group). After healing for 1, 2, 3, 4, 5, and 6 weeks, the rabbits were sacrificed with an overdose of KCl solution. Two rabbits were killed at each time, and the samples including dental implants and surrounding bone were collected and processed for histological analysis. Results: More newly formed bone and a better bone healing process were observed in control group. The histomorphometric analysis revealed that the mean percentage of bone-to-implant contact in the control group was significantly higher than that of the experimental group (25.23 vs. 8.16 %; P < 0.05, independent-simple t test, analysis of variance [ANOVA]). Conclusions: The results indicate that in the addition of PRP to bovine-derived xenograft in the repair of bone defects around the implant, PRP may delay peri-implant bone healing.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.307-317
• /
• 1999

The purpose of this study is to utilize conventional procedures for evaluation of liquefaction potential and to compare the results obtained by modified detailed method based on Korean earthquake magnitude (M=6.5). Liquefaction potential is assessed by comparing liquefaction strength of soil and cyclic shear stress generated in the soil layers during earthquakes. The cyclic shear stress is computed from the earthquake response analysis, and liquefaction strength of soil is evaluated by using results from cyclic triaxial tests. The cyclic triaxial tests are performed on many different conditions of sample ; relative densities(50%, 60%, and 70%), initial effective confining pressures (70kPa, 100kPa, and 150kPa), and fine contents(10%, 20%, and 30%). From the result of comparing the conventional procedure with the modified detailed method, it is found that the modified detailed method tends to evaluate larger safety factor against liquefaction in the weak sand site$(FS \leq1.5)$. Therefore in this case, it is suggested that liquefaction potential should be evaluated by using the modified detailed method based on cyclic triaxial tests. It is also found that in modified detailed method based on earthquake magnitude 6.5, critical depth where liquefaction can be generated is around 15m from the ground surface.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.484-492
• /
• 2002

The selection of the maxillary anterior artificial teeth is made primarily for esthetics and they must be in harmony with the surrounding oral environment. However the selection of artificial teeth is based on the large degree of subjective judgement or the dentists, therefore, this is one of the most unscientific processes. This study was performed to determine clinically whether there is correlation among the width of the maxillary central incisor(WMCI), the intercanine distance (ICD) the facial width(FW), and the interalar nasal width(IAW) in Korean adults, and to provide the selection standards for the maxillary anterior artificial teeth. The casts were obtained from 91 undergraduate dental students(49 males and 42 females) with Angle's class I occlusion presenting well-arranged intact anterior teeth. The WMCI and ICD were measured on the casts with a vernier calipers($Miltex^{(R)}$, Germany). The photographic procedures under standardized conditions were performed to record each subject's frontal face using digital camera($Olympus^{(R)}$, C-2500L, Japan). The FW and IAW were measured with image analyzer($Image-Pro^{(R)}$ PLUS. media cybermetrics. USA). The results were obtained as follows : 1. The mean WMCI was $8.11{\pm}0.67mm$, ICD was $37.88{\pm}2.15mm$, FW was $141.29{\pm}5.84mm$. and IAW was $37.85{\pm}2.29 mm$. 2. The ratios of FW/WMCI, FW/ICD, IAW/ICD were 17.4, 3.7, 1.0 respectively. 3. All measurements(WMCI, ICD, FW, and IAW) of male group were longer than those of female group significantly in Student's t-test(p<0.01). 4. There was significant correlation between WMCI, ICD, FW, and IAW in Pearson's correlation analysis(p<0.01). 5, The relationship between IAW and ICD shows the strongest correlation among six combinations in linear regression analysis($R^2$=0.753, Y=7.046+0.815X). The FW and IAW could be very reliable guides for the selection of the maxillary anterior artificial teeth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.417-424
• /
• 2010

The purpose of this study was to detect significant SNPs for carcass quality traits using DNA chips of high SNP density in Hanwoo populations. Carcass data of two hundred and eighty nine steers sired by 30 Korean proven sires were collected from two regions; the Hanwoo Improvement Center of National Agricultural Cooperative Federation in Seosan, Chungnam province and the commercial farms in Gyeongbuk province. The steers in Seosan were born between spring and fall of 2006 and those in Gyeonbuk between falls of 2004 and 2005. The former steers were slaughtered at approximately 24 months, while the latter steers were fed six months longer before slaughter. Among the 55,074 SNPs in the Illumina bovine 50K chip, a total of 32,756 available SNPs were selected for whole genome association study. After adjusting for the effects of sire, region and slaughter age, phenotypes were regressed on each SNP using a simple linear regression model. For the significance threshold, 0.1% point-wise p value from F distribution was used for each SNP test. Among the significant SNPs for a trait, the best set of SNP markers were selected using a stepwise regression procedure, and inclusion and exclusion of each SNP out of the model was determined at the p<0.001 level. A total of 118 SNPs were detected; 15, 20, 22, 28, 20, and 13 SNPs for final weight before slaughter, carcass weight, backfat thickness, weight index, longissimus dorsi muscle area, and marbling score, respectively. Among the significant SNPs, the best set of 44 SNPs was determined by stepwise regression procedures with 7, 9, 6, 9, 7, and 6 SNPs for the respective traits. Each set of SNPs per trait explained 20-40% of phenotypic variance. The number of detected SNPs per trait was not great in whole genome association tests, suggesting additional phenotype and genotype data are required to get more power to detect the trait-related SNPs with high accuracy for estimation of the SNP effect. These SNP markers could be applied to commercial Hanwoo populations via marker-assisted selection to verify the SNP effects and to improve genetic potentials in successive generations of the Hanwoo populations.

• Korea Journal of Hospital Management
• /
• v.14 no.4
• /
• pp.149-162
• /
• 2009

The purpose of this study is to design strategic hospital service based on each hospital's features. For this study, an assessment was conducted by 398 in-patents of one university hospital located in Seoul. The self-questionnaires, which were investigated from Oct. 15th to 29th in 2008, compared central reception desk with ward reception desk in satisfaction and re-use rate of patients. The major results of this study are as follow. First, according to each reception desk user, they have different satisfaction of it. As for the staff kindness, admission procedure, discharge procedure and manner of staff, those made patients be gratified as well. Second, when it comes to the intention of re-use, there were no significant features between them. Only convenience in admission and discharge procedure, however, was an attractive factor for the recommendation. Third, this study found out the reasons for higher re-use rate of central reception desk users. Regarding service, they were contented with the time for test and treatment. As for the hospital service, they would like to re-use this hospital because of convenient steps of paying interim fee and getting certificates. Forth, this study found out the reasons for higher re-use rate of ward reception desk users. As a point of hospital service view, they responded that respected privacy, hospital facility and general service were good for staying. As for the manner of staff, they mentioned nurses and staff in charge and whole staff members were kind. When it comes to the procedures of patient management, steps of discharge and paying interim fee were convenience. In conclusion, the results of this study suggest that providing a ward reception desk service can boost the satisfaction and re-use rate of in-patients. Furthermore, this strategic management method would be good for not only cutting the moving line but also efficient in-patient care system. These results can be used for the strategic hospital marketing field, as well. Even though this study has a limitation of the targeted populations which were only in a ward reception desk running hospital, it can say that having competitiveness in satisfaction of hospital service is good for promoting and differencing each hospital. Consequently, whole general management system would be adjusted first for differencing each hospital; however, this sort of additional factor should be concerned as well. I expect that this study would give meaningful data for designing strategic and differencing marketing method to lots of hospitals.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.40-44
• /
• 2003

Soil-borne infectious disease including Pythium aphanidermatum and Rhizoctonia solani causes severe damage to plants, such as cucumber. This soil-borne infectious disease was not controlled effectively by chemical pesticide. Since these diseases spread through the soil, chemical agents are usually ineffective. Instead, biological control, including antagonistic microbe can be used as a preferred control method. An efficient method was developed to select an antagonistic strain to be used as a biological control agent strain. In this new method, surface tension reduction potential of an isolate was included in the ‘decision factor’ in addition to the other factors, such as growth rate, and pathogen inhibition rate. Considering these 3 decision factors by a statistical method, an isolate from soil was selected and was identified as Bacillus sp. GB16. In the pot test, this strain showed the best performance among the isolated strains. The lowest disease incidence rate and fastest seed growth was observed when Bacillus sp. GB16 was used. Therefore this strain was considered as plant growth promoting rhizobacteria (PGPR). The action of surface tension reducing component was deduced as the enhancement of wetting, spreading, and residing of antagonistic strain in the rhizosphere. This result showed that new selection method was significantly effective in selecting the best antagonistic strain for biological control of soil-borne infectious plant pathogen. The antifungal substances against P. aphanidermatum and R. solani were partially purified from the culture filtrates of Bacillus sp. GB16. In this study, lipopeptide possessing antifungal activity was isolated from Bacillus sp. GB16 cultures by various purification procedures and was identified as a surfactin-like lipopeptide based on the Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), high performance liquid chromatography mass spectroscopy (HPLC-MS), and quadrupole time-of-flight (Q-TOF) ESI-MS/MS data. The lipopeptide, named GB16-BS, completely inhibited the growth of Pythium aphanidermatum, Rhizoctonia solani, Penicillium sp., and Botrytis cineria at concentrations of 10 and 50 mg/L, respectively. A novel method to prevent the foaming and to provide oxygen was developed. During the production of surface active agent, such as lipopeptide (surfactin), large amount of foam was produced by aeration. This resulted in the carryover of cells to the outside of the fermentor, which leads to the significant loss of cells. Instead of using cell-toxic antifoaming agents, low amount of hydrogen peroxide was added. Catalase produced by cells converted hydrogen peroxide into oxygen and water. Also addition of corn oil as an oxygen vector as well as antifoaming agent was attempted. In addition, Ca-stearate, a metal soap, was added to enhance the antifoam activity of com oil. These methods could prevent the foaming significantly and maintained high dissolved oxygen in spite of lower aeration and agitation. Using these methods, high cell density, could be achieved with increased lipopeptide productivity. In conclusion to produce an effective biological control agent for soil-borne infectious disease, following strategies were attempted i) effective screening of antagonist by including surface tension as an important decision factor ii) identification of antifungal compound produced from the isolated strain iii) novel oxygenation by $H_2O_2-catalase$ with vegetable oil for antifungal lipopeptide production.