• 한국해양공학회지
• /
• 제21권2호
• /
• pp.60-66
• /
• 2007

The first Korean cold room facility for ice mechanics experiments was assembled in 2004. Since then, the $4m{\times}6m$ cold room facility has been used, extensively under various environmental and loading conditions. After reviewing published references on cold room testing methods and also by trial and error, the standard procedures for testing and preparing laboratory ice material were established for the measurement of basic ice properties. In this paper, laboratory experimental techniques with the cold room facility and standard procedures established for ice material properties are introduced. Test specimens include laboratory-grown fresh water ice and frozen soils. Tests are carried out for unconfined compressive strength. Preparation and dimension of the specimen are the most important issues arising in cold room tests. The details of specimen preparation, testing procedure and strength test results are also discussed.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.859-870
• /
• 2011

The purpose of this paper is to develop reliability analysis procedures for repairable systems with interval failure time data and apply the procedures for assessing the storage reliability of a subsystem of a certain type of guided missile. In the procedures, the interval failure time data are converted to pseudo failure times using the uniform random generation method, mid-point method or equispaced intervals method. Then, such analytic trend tests as Laplace, Lewis-Robinson, Pair-wise Comparison Nonparametric tests are used to determine whether the failure process follows a renewal or non-renewal process. Monte Carlo simulation experiments are conducted to compare the three conversion methods in terms of the statistical performance for each trend test when the underlying process is homogeneous Poisson, renewal, or non-homogeneous Poisson. The simulation results show that the uniform random generation method is best among the three. These results are applied to actual field data collected for a subsystem of a certain type of guided missile to identify its failure process and to estimate its mean time to failure and annual mean repair cost.

• 대한간호학회지
• /
• 제40권3호
• /
• pp.326-335
• /
• 2010

Purpose: The purpose of this descriptive study was to determine the perception of physicians and nurses on family presence during invasive procedures. Methods: The study population consisted of 100 physicians and 100 nurses from five hospitals which have more than 500 beds in B city. Data collection was done from August 20 to September 19, 2007. The Family Presence During Resuscitation (FPDR) Inventory developed by Fulbrook, Albarran and Latour (2005) was used as the study instrument. The collected data was analyzed by t-test, ANOVA and Duncan's multiple range test using SPSS/WIN 14.0 version. Results: Nurses had more positive attitudes to allowing family members to be present during invasive procedures than physicians did. However, compared to physicians, nurses had more concern about problems of confidentiality, arguing with medical team, and increased rate of legal action if family members were present during invasive procedure. Conclusion: The results of this study indicate that educational programs and policy for family presence be required within the hospital to enhance the perception of physicians and nurses to the family presence.

• 부모자녀건강학회지
• /
• 제9권2호
• /
• pp.150-160
• /
• 2006

Purpose: This study was to examine how an invasive procedures education program affected the anxiety and supportive behavior of mothers with hospitalized children, and to help provide an efficient to improve their maternal role performance by boosting their supportive behavior. Method: To evaluate their anxiety, Spilberger(1972)'s Anxiety Inventory that was translated by Kim Jeong-taek, et al.(1978) was employed, and Weon Dae-yeoung(1999)'s modified version of Melnyx(1994)'s Index of Parent Support During Instructive Procedure was utilized to assess their supportive behavior. The collected data were analyzed with SPSS program. Statistical data on real number and percentage were acquired, and $x^2$-test and t-test were conducted. Result: There was a more favorable change in the anxiety(trait anxiety and state anxiety) of the experimental group that participated in an invasive procedures education program(a mean of -0.14) than in that of the control group that didn't(a mean of 0.16). The experimental group(an average of 4..65) outstripped the control group(a mean of 3.42) in that regard. Conclusions: The invasive procedures education program that catered to the mothers with hospitalized children turned out to be effective in easing their anxiety and enhancing their supportive behavior.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1219-1226
• /
• 2006

The ASTM test standard recommends the use of the compact tension specimen for creep crack growth rates measurement. In the creep crack growth rate test, the displacement rate due to creep is obtained by subtracting the contribution of elastic and plastic components from the total load line displacement rate based on displacement partitioning method fur determining $C^*-integral$, which involves Ramberg-Osgood (R-O) fitting procedures. This paper investigates the effect of the R-O fitting procedures on plastic displacement rate estimates in creep crack growth testing, via detailed two-dimensional and three-dimensional finite element analyses of the standard compact tension specimen. Four different R-O fitting procedures are considered; (i) fitting the entire true stress-strain data up to the ultimate tensile strength, (ii) fitting the true stress-strain data from 0.1% strain to 0.8 of the true ultimate strain, (iii) fitting the true stress-strain data only up to 5% strain, and (iv) fitting the engineering stress-strain data. It is found that the last two procedures provide reasonably accurate plastic displacement rates and thus should be recommended in creep crack growth testing. Moreover, several advantages of fitting the engineering stress-strain data over fitting the true stress-strain data only up to 5% strain are discussed.

• 한국항공운항학회지
• /
• 제24권4호
• /
• pp.81-86
• /
• 2016

Unmanned aerial vehicles(UAVs) are increasingly used in civilian areas as well as in military areas due to the technological advancement of UAVs. In response to the increasing demand in UAVs, many studies are under way to integrate the airspace between manned aircraft and UAV. The development of flight test can secure the performance and flight characteristics of the designed aircraft. And the capability of research and development can be expanded through the accumulation of technical data. It is also essential to verify the correct performance and characteristics of development aircraft themselves. In this paper, we propose development flight test procedures and items for civilian UAVs.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 춘계 총회 및 학술발표회
• /
• pp.1-11
• /
• 1993

Cartridge filters are widely used in liquid-solid separation processes. To select a proper filter system for the requirements of a given application, a knowledge of filter efficiency and dirt capacity is required. The filter manufacturer needs to provide data which are based on test procedures simulating real parameters on a laboratory scale. There does not exist at present a standard for liquid filter testing (with the exception of the Multipass Test to ISO4752 for hydraulic filters). Users have to work with data based on different test procedures. This paper will discuss principles of filter testing, efficiency andd dirt capacity results as a function of test parameters, and data interpretion to provide a guideline for the end user.

• 한국항공운항학회지
• /
• 제20권2호
• /
• pp.7-12
• /
• 2012

A landing gear absorbs the impact energy during the touchdown and it generally consists of an oleo-pneumatic shock absorber and structural components. It should be designed not only to satisfy the static and fatigue strength requirements but to have the sufficient shock absorbing efficiency. The design loads and shock absorbing performance are to be validated by tests, which is required by MIL Spec and FAR, etc. This paper presents the development procedures from the design requirements to the qualification tests and technical points to be considered, with examples of the helicopter landing gear development.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.887-890
• /
• 2005

The earthquake test Procedures specified in three international codes were reviewed and compared for the network equipments. As technical level on the electronics and networking is growing in Korea, many related equipments are required to export to abroad. The network equipments are now essential tools for communication among individuals as well as societies, especially at the hazard situation such as earthquake strike. The Korean network companies are trying to improve the earthquake resistance performance for their products to expand domestic and international markets. In this paper it is reviewed that most codes related on the earthquake tests can be performed with the facilities provided in Korea for the network equipments. However new facility is required to prepare for more performance and higher regulating codes expected.

• 한국항공우주학회지
• /
• 제41권1호
• /
• pp.10-16
• /
• 2013

본 논문에서는 풍동 실험을 통해 취득한 소음측정 결과에서 실제 비행에 기체에서 발생되는 소음을 예측하는 과정에 대하여 다루었으며 정지된 소음원을 비행하는 것과 같은 상태로 시뮬레이션 할 수 있는 방법에 대하여 소개하고 실험을 통하여 검증하였다. 또한 국제민간항공기구(이하 ICAO)에서 규정한 절차에 따라 틸트로터 항공기 및 무인항공기의 환경소음을 평가할 수 있는 방안을 제시하였다. 제시한 평가 방안을 검증하기 위해서 풍동실험과 비행시험에 대한 소음실험 시뮬레이션 프로그램을 구성하였으며 7kg급 무인항공기를 통한 풍동 실험 및 비행 실험을 수행하였으며 풍동 실험 결과로부터 비행 상태의 소음예측이 가능하다는 것을 확인 할 수 있었다.