• 제목/요약/키워드: test procedures

검색결과 1,849건 처리시간 0.026초

Prediction of the Chemical Composition and Fermentation Parameters of Fresh Coarse Italian Ryegrass Haylage using Near Infrared Spectroscopy

  • Kim, Ji Hye;Park, Hyung Soo;Choi, Ki Choon;Lee, Sang Hoon;Lee, Ki-Won
    • 한국초지조사료학회지
    • /
    • 제37권4호
    • /
    • pp.350-357
    • /
    • 2017
  • Near infrared spectroscopy (NIRS) is a rapid and accurate method for analyzing the quality of cereals, and dried animal forage. However, one limitation of this method is its inability to measure fermentation parameters in dried and ground samples because they are volatile, and therefore, respectively lost during the drying process. In order to overcome this limitation, in this study, fresh coarse haylage was used to test the potential of NIRS to accurately determine chemical composition and fermentation parameters. Fresh coarse Italian ryegrass haylage samples were scanned at 1 nm intervals over a wavelength range of 680 to 2500 nm, and optical data were recorded as log 1/reflectance. Spectral data, together with first- and second-order derivatives, were analyzed using partial least squares (PLS) multivariate regressions; scatter correction procedures (standard normal variate and detrend) were used in order to reduce the effect of extraneous noise. Optimum calibrations were selected based on their low standard error of cross validation (SECV) values. Further, ratio of performance deviation, obtained by dividing the standard deviation of reference values by SECV values, was used to evaluate the reliability of predictive models. Our results showed that the NIRS method can predict chemical constituents accurately (correlation coefficient of cross validation, $R_{cv}^2$, ranged from 0.76 to 0.97); the exception to this result was crude ash ($R_{cv}^2=0.49$ and RPD = 2.09). Comparison of mathematical treatments for raw spectra showed that second-order derivatives yielded better predictions than first-order derivatives. The best mathematical treatment for DM, ADF, and NDF, respectively was 2, 16, 16, whereas the best mathematical treatment for CP and crude ash, respectively was 2, 8, 8. The calibration models for fermentation parameters had low predictive accuracy for acetic, propionic, and butyric acids (RPD < 2.5). However, pH, and lactic and total acids were predicted with considerable accuracy ($R_{cv}^2$ 0.73 to 0.78; RPD values exceeded 2.5), and the best mathematical treatment for them was 1, 8, 8. Our findings show that, when fresh haylage is used, NIRS-based calibrations are reliable for the prediction of haylage characteristics, and therefore useful for the assessment of the forage quality.

유두 미세 갑상선암의 진단 및 치료에 대한 고찰 (Diagnosis and Treatment of Papillary Thyroid Microcarcinoma(PMC))

  • 윤경석;오성수;박성길;정을삼
    • 대한두경부종양학회지
    • /
    • 제14권2호
    • /
    • pp.228-235
    • /
    • 1998
  • Objectives: Papillary microcarcinoma of the thyroid was evaluated as to the effectiveness of diagnostic modalities, lymphatic spread pattern, and therapeutic decision according to tumor size. Material and Methods: We retrospectively analyzed a clinicopathologic findings of 72 papillary microcarcinoma patients who were treated at the over 11 years between 1985 and 1995. The authors divided papillary microcarcinoma of the thyroid into two subgroups according to tumor size: $0{\leqq}5mm$ and $5<0{\leqq}10mm$. An analysis including age and gender distribution, diagnostic tools(thyroid sonogram, thyroid scan, thyroid function test, fine needle aspiration cytology, frozen section), pathological examination of lymphnode, and surgical procedures was carried out in each subgroups. Results: The carcinoma of smaller than 5mm were found in 32 patients, and of 6 -10mm were in 40 patients. The average age of patients was 45years and all of them were female. Cold nodules on thyroid scan were noticed in 53 patientss and normal findings were in 15 patients. Suspicious malignant lesions(fine calcification, solid mass, irregular margin) on thyroid sonography were detected in 23 patients and the sonography was more useful in detecting $0{\leqq}5mm$ small sized lesions than other diagnostic methods. FNAC were performed in 17 patients, and 7 patients were diagnosed as having thyroid papillary cancer. But diagnotic rate in $0{\leqq}5mm$ small sized lesions was very low(one of eights).Frozen section were performed in all patients, among these 15 patients were diagnosed as being benign diseases and false negative rates were higher in $0{\leqq}5mm$ small sized lesions than in $5<0{\leqq}10mm$ sized lesions(p-value<0.006). Only thyroidectomies were performed in 24 patients and thyroidectomy with node dissections in 48 patients. The lymphnode metastatic rates were much higher in multifocal lesions(61.5%) than in single lesion. The incidence of cervical lymphnode metastasis was 19.4% in $0{\leqq}5mm$ sized lesions and 47.9% in $5<0{\leqq}10mm$ sized lesions. Postoperative management were performed with TSH suppression therapy(T4, synthroid) in all patients and RI therapy in 29 patients. Conclusion: On the basis of our study, improved preoperative diagnostic tools for papillary microcarcinoma of the thyroid was helpful in the choice of surgical treatment. As a result of techninological progress(ultrasonography, FNAC), the pencentage of the discovery of papillary microcarcinoma has been increased. The thyroid ultrasonography was useful in detecting small sized lesions($0{\leqq}5mm$), but FNAC may not be beneficial in detecting small sized lesions($0{\leqq}5mm$). In the surgical procedure, thyroid lobectomy alone should be avoided because of the high rate of bilaterality and multifocality.

  • PDF

고가교 경량화에 따른 성능개선 (Performance Improvement of Overpass Bridge by Weight Reduction)

  • 김성배;남상혁;김장호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.51-60
    • /
    • 2011
  • 본 연구에서는 환경적인 요인으로 인한 성능저하현상으로 내구성 저하가 예상되는 건대-구의간 고가교의 현재 상태를 분석하고 내구성 저하로 인한 내구연한의 감소를 막기 위하여 고가교 구조물의 경량화를 통한 성능개선을 수행하고자 한다. 경량화 작업은 콘크리트 방음벽을 경량재 방음벽으로, 도상을 자갈도상에서 콘크리트 도상으로, 마지막으로 트라프를 경량화 함으로써 고가교 전체의 경량화를 유도한다. 이러한 고가교 경량화에 따른 정적 및 동적 거동 변화와 성능개선 효과를 분석하고, PSC I 형교 구간의 내하율 증진에 의한 구조안전성을 확인한다. 경량화 결과 구조물의 처짐이 2.6mm가 감소하고 1.07MPa의 인장응력이 감소된 것으로 평가되어 대상 구조물의 구조성능이 효과적으로 개선되었음을 알 수 있다. 고유진동수도 경량화에 따라 약 30% 증가하여 진동이 감소하고 동적거동이 향상되었다. 또한, 해석 및 계측 결과를 근거로 하여 대상교량의 내하력을 평가한 결과, 경량화에 따라 내하율이 1.82에서 1.93으로 증가하여 경량화에 따른 성능개선 효과가 우수한 것으로 판명되었다.

고등학교 남학생에 대한 가정과 교육의 필요도에 관한 조사연구 (A Study on the Need of Home Economics Education on High School Male Students.)

  • 임애용;윤인경
    • 한국가정과교육학회지
    • /
    • 제6권1호
    • /
    • pp.73-92
    • /
    • 1994
  • The purpose of this study is to investigate the need of home economics education on high School male students for purpose, the questions raised in this study are as follows. 1. Does home economics education on high school male students needs\ulcorner and are whether not or home economics education on high school male students need different according to sex, age, edu-cation, income, occupation\ulcorner 2. If home economics education on high school male students need or not. What is the reason of that\ulcorner and are the reason of that different according to sex, age, education, income, occupation\ulcorner 3. If home economics education on high school male students need, what is the contents of home economics education and are that different according to sex, age, education, income, occupation\ulcorner The subjects of the study consisted of 183 men and women in Ch’ong ju City(over 21 years old) The data were analiged by statistical procedures such as frequency, X(sup)2, oneway ANOVA, two-way ANOVA, Duncan’s Multiple Range Test. The major results of the study were summarized as follow: 1. The response rate on home economics education on high school male students was absolutely high(91.8%). of demographic variables, the only sex appeared the significant differences. the men groups responsed higher not to need than the women groups. 2. As the reasons of home economics educations on high School male students needing the respons of the highest response rate were that ‘as family community, family members understant, cooperated, and are responsible with each other or one anther’and that ‘as society becomes in-dustrial gradually, family members have to have the accurate perception, or attitudies on home life’of demographic variables, sex, income, and occupation appeard the significant differences. In the contrast of that, as the reaspon of home economics education on high school male stu-dents not needing, the reasons of the highest. response rate were that ‘as sex, the role is different’and that ‘home economics education needs not essentially to learn through the school education’. and there were not differences according to demographic variables. 3. As home economics education contents for high school mal students, the most need content part was child part. the second content part was family development and family relationships part. There was the significant differences according to all the demographic variables. Particulary, the lower the lever of education, in come and occupation were, the less the degree of need on all content part was.

  • PDF

Partial pulpotomy를 이용한 미성숙 영구치의 치수 치료 : 증례 보고 (THE PULP TREATMENT OF IMMATURE PERMANENT TEETH USING PARTIAL PULPOTOMY)

  • 노승철;김용수;김정욱;장기택;한세현
    • 대한소아치과학회지
    • /
    • 제26권4호
    • /
    • pp.616-622
    • /
    • 1999
  • 치수치료의 주요한 목적은 구강조직의 본래의 건강을 유지하는 것이며, 치수치료 시 가장 중요하고 어려운 점은 치수조직의 건강상태 또는 염증의 정도를 결정함으로써 최선의 치료방법을 결정하는 것이다. 미성숙 영구치는 풍부한 혈류 공급으로 다양한 손상에 성공적으로 반응하게끔 치수의 능력을 향상시킴으로써 많은 치수치료 술식을 위한 좋은 조건을 가지고 있다. 기저재(base) 또는 이장재(liner), 간접 치수복조술, 직접 치수복조술, 그리고 치경부 치수절단술을 포함한 여러 종류의 보존적인 치수치료가 미성숙 영구치를 위해 추천되어 왔다. 근래에는 외상으로 인하여 치수노출된 영구절치를 치료하는데 있어 주로 제시된 부분 치수절단술(partial pulpotomy)이 우식으로 인해 치수노출된 영구대구치를 치료하는 또 다른 술식으로 제안되고 있다. 부분 치수절단술 후 치아가 다음의 criteria를 만족시킬 때 치유가 되었다고 결론지었다. 1. 임상적 무증상 2. dentin bridge 형성의 방사선학적 증거 3. 방사선상에 치수내 또는 치근단 병소가 없다는 증거 4. 지속적인 치근 발육과 미성숙 치아의 치근첨 형성 5. 성숙된 치아에서 정상적인 상아질의 축적 6. 전기치수검사에서 양성 반응 이에 저자는 미성숙 영구치에서 우식 또는 외상으로 인한 치수노출시 부분 치수절단술을 행하여 양호한 결과를 얻었기에 이를 보고하는 바이다.

  • PDF

남녀 대학생의 척추만곡에 관한 연구 (A Study of Spinal Curvature in Female and Male University Students)

  • 이병규;남기석;이충휘
    • 한국전문물리치료학회지
    • /
    • 제5권3호
    • /
    • pp.72-87
    • /
    • 1998
  • This study examined the rates of spinal abnormal curvature and the correlation of the Body Mass Index (BMI), Low Back Pain (LBP) and spinal curvature by measuring scoliosis, kyphosis, and lordosis in university students. The study population included 67 male, 92 female university students, making a total of 159, in Wonju City. Spinal curvature was measured by an electrogoniometer in a computerized skeletal analysis system. Lateral curvature of spine of more than 10 degrees was considered as nonspostural scoliosis. The correlation of BMI, LBP and the spinal curvature was analysed by Pearson's correlation coefficient and t-test. The following results were obtained: 1. The overall incidence and rate of scoliosis in cases with a greater than 10 degree curve in males was an incidence of 8 and a rate of 11%. In females the incidence was 36 and the rate 39.2%. 2. The overall incidence and rate of kyphosis of less than 20 degrees in males was a rate of 9 and an incidence of 11.9%. In females, the rate was 5 and the incidence 5.4%. In kyphosis cases of more than 40 degrees, the male rate was 5 and the incidence 7.7%. For female the rate was 13 and the incidence 14.2%. 3. The overall incidence and rate of lordosis with curves of less than 20 degrees was a rate of 6 for males and an incidence of 9.0%. For females, the rate was 5 and the incidence 5.4%. In cases of more than 50 degrees lordosis, the female rate was 2 and the incidence 2.2%. There were no males in this category. 4. There was a negative correlation between kyphosis and BMI. The greater the kyphotic curve, the less the BMI in males (p<0.05). There was no significant BMI difference by gender in either scoliosis or lordosis. There was, however, a significantly decreased sacral angle in the female group with LBP. The results of this study cannot be generalized to the general population because the subjects were all from one university. The measurements were quite reliable because the angles determined by the Metrocom System were highly correlated with radiologic findings. This study shows the need for a regular screening system for spinal curvatures in university health examination procedures.

  • PDF

상아질 표면상태에 따른 광중합형 글래스아이오노머 시멘트의 전단결합강도에 관한 연구 (A STUDY ON THE SHEAR BOND STRENGTH OF LIGHT CURED GLASS IONOMER CEMENTS TO CONTAMINATED DENTIN)

  • 김경화;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.609-621
    • /
    • 1997
  • The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

  • PDF

광전자방출(OSEE)법을 이용한 세정성 평가 연구 (A Study on the Evaluation of Cleaning Ability Using Optically Stimulated Electron Emission Method)

  • 민혜진;신진호;배재흠
    • 청정기술
    • /
    • 제14권2호
    • /
    • pp.95-102
    • /
    • 2008
  • 친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 적용하여야 하며 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 따라서 본 연구에서는 여러 세정성 평가 방법들 중 광전자방출법(optically stimulated electron emission)(OSEE)을 활용한 세정성 평가에 관한 연구를 하였다. 실험에 사용된 오염물은 플럭스, 솔더, 그리스, 절삭유, 그리고 그리스 35%와 절삭유 65%을 혼합하여 만든 혼합 오염물로서 세정제에 의한 이들의 세정성을 평가하였다. 본 연구실에서 개발하였거나 조제한 세정제를 이용하여 세정 후 OSEE법 측정 결과와 중량법 및 접촉각측정법에 의한 세정성 평가방법을 비교 분석하였다. 본 연구 결과로 플럭스와 혼합오염물을 세정한 경우의 OSEE 세정효율은 중량법과 거의 유사한 결과를 나타내었지만, 솔더와 그리스 세정의 경우는 UV를 반사 또는 흡수하여 중량법과 비교할 수 없었다. 그리고 절삭유 세정의 경우 실질적으로 눈에 보일 정도로 피세정물 표면에 오염물이 남아 있음에도 불구하고 중량법 측정 시 100%의 세정효율을 보임으로써 중량법 측정의 한계를 보였지만 OSEE법으로는 미소잔류 절삭유의 존재를 측정할 수 있었다. 또한 OSEE법과 접촉각측정법의 세정성을 비교측정한 결과로 플럭스, 혼합 오염물 그리고 절삭유의 세정성 평가는 OSEE법과 접촉각측정법이 유사한 세정효율을 보여주었다. 그리고 솔더와 그리스 세정은 접촉각측정법이 OSEE법보다 더욱 정밀하게 세정성을 평가할 수 있는 것으로 판단되었다.

  • PDF

$MIEX^{(R)}$+응집공정을 이용한 한외여과 공정의 최적화 : 다양한 전처리 공정의 적용에 따른 막 오염 현상 규명 (Optimization of Ultrafiltration Process using $MIEX^{(R)}$+Coagulation Process)

  • 손희종;황영도;노재순;정철우;강임석
    • 대한환경공학회지
    • /
    • 제27권7호
    • /
    • pp.753-761
    • /
    • 2005
  • 전처리 공정에 따른 투과 flux 변화를 살펴보면 $MIEX^{(R)}$+UF 공정의 경우 응집+UF 공정에 비하여 높은 유기물 제거율을 나타내었으나 투과 flux 감소는 크게 나타났다. 따라서, 막 오염을 자세하게 규명하기 위하여 sequential filtration 실험결과 막 오염물질은 고분자 유기물질로 나타났으며, DOC 0.5 mg/L 이하의 유기물질이 막 오염 유발물질로 작용하고 있었다. 10 kDa 이하의 저분자 유기물질들은 $MIEX^{(R)}$ 처리에 의해 제거가 용이하여 막 표면에서 유기물 부하를 감소시켜 이로 인해 응집+UF공정에 비하여 투과 flux 감소율이 낮게 나타났다. $MIEX^{(R)}$+UF공정은 입자상 물질의 존재 유무에 관계없이 flux 감소율은 거의 유사한 경향을 보였으나 응집+UF공정은 용존성 유기물질만이 존재하는 시수에 비하여 입자상 물질이 존재하는 경우에 투과 flux 감소가 더 낮게 나타났다.

상권방문 추진동기와 몰입, 만족, 재방문 의도 (Visit Push Motivation for a Trading Area and Flow, Satisfaction, and Revisit Intention)

  • 이수덕;이용기
    • 유통과학연구
    • /
    • 제16권9호
    • /
    • pp.65-77
    • /
    • 2018
  • Purpose - A trading area is very closely related to consumer life. A trading area is a cultural and social space that consumes culture and promotes human relationships as well as an economic space where consumers live their daily lives. In this context, a trading area research should be conducted objectively and empirically because it deals with the activities of consumer's life. The purpose of this study is to identify the intrinsic psychological motivation(push motivation) caused when consumers visit a trading area and to demonstrate how the push motivation for a trading area influence on consumer's flow, satisfaction, revisit intention. Research design, data, and methodology - In order to develop research hypotheses for this study, the development procedures for push motivation scale are as follows; (1) generating initial pool of items based on previous studies, (2) expert judgement to evaluate content and face validity, and (3) assessing convergent and discriminant validity using confirmatory factor analysis. In order to achieve these purposes, online surveys were conducted on frequent or familiar visitors to the trading areas around the Gangnam, Kunkuk University and Hongik University Station. Among the 1,343 questionnaires collected, 1,157 cases were analyzed by using SPSS 22.0 and SmartPLS 3.0 statistical package program, except for 186 responses in which responses were judged to be unfaithful. Results - The push motivation was classified into five sub-dimensions of excitement/stimulus, rest/relaxation, exit/refreshing, knowledge/learning and human relationship promotion as multidimensional and complex factors composed of individual and social-related dimensions. The excitement/stimulus and human relationship promotion of push motivation have positive effects on satisfaction. However, all dimensions of the push motivation have positive effects on flow. And flow has a positive effect on satisfaction and revisit intention. Meanwhile, the mediation test using boostrapping shows that flow plays a full mediating role in the relationship between rest/relaxation, exit/refreshing, knowledge/learning and satisfaction, but a partial mediating rol e between excitement/stimulus, human relationship promotion and satisfaction. Finally, satisfaction plays a partial mediating role between flow and revisit intention. Conclusions - This study shows that the push motivation is multidimensional and compositive depending on the situation of a consumer. In addition, it is found that the human relationship promotion(a social-related motivation) has a much more important effect on flow and satisfaction than other push motivations of individual dimensions. It also shows that satisfaction increases when consumers are being flowed at their visit and degree of revisit intention also grows as satisfaction increases. As implications of this study, a marketer should try to understand consumer's visit motivation at first and then develop factors that increase their flow, satisfaction, revisit intention. It also requires a marketer to approach subjects on a trading area more objectively and empirically based on the psychology and behavior of consumers, in order to establish a proper and efficient strategy on development of a trading area.