• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.427-431
• /
• 1984

This experiment was conducted to study the effects of Korean ginseng and tocopherol on serum testosterone level, protein metabolism and swimming endurance in rats. Powdered ginseng (2.5 g/kg) and ${\alpha}-tocopherol$ (250 mg/kg) were added directly into the basal diet of rats feeding for 6 weeks. The serum testosterone level of ginseng-treated rats had no difference from that of control rats, but the level was slightly increased in tocopherol-treated rats. In the case of ginseng-treated rats, there were no significant difference in the contents of albumin, ${\alpha}_1-globulin$, ${\alpha}_2-globulin$, ${\gamma}-globulin$ and A/G ratio compared with those of the control rats, however, the levels of total protein and ${\beta}-globulin$ were increased significantly(p<0.005). Total protein value of tocopherol-treated rats was higher than that of the control rats(p<0.005). In contrast, albumin content was slightly decreased. The contents of ${\alpha}_1-globulin$, ${\alpha}_2-globulin$, ${\beta}-globuiln$ and ${\gamma}-globulin$ were higher in the rats fed tocopherol diet that those obtained from the control rats. Accordingly A/G value was markedly decreased (p<0.001). In swimming endurance test, both Korean ginseng and ${\alpha}-tocopherol$ did not appear to have any effect on rats' stamina.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.758-763
• /
• 2014

Soil microbial fuel cells (SMFC) have gained a great attention as an eco-friendly technology that can simultaneously generate electricity and treat organic pollutants from the contaminated soil. We evaluated the effect of electrode spacing and size on the performance of SMFC treating soil contaminated with organic pollutants. Maximum power density decreased with increase in electrode distance or decrease in electrode size, likely due to higher internal resistance. The maximum voltage and power density decreased from 326 mV and $19.5mW/m^2$ with 4 cm of electrode distance to 222 mV and $5.9mW/m^2$ with 9 cm of electrode distance. In case of electrode size test, the maximum voltage and power density generated was 291 mV, $0.34mW/m^3$ when both of anode and cathode area were $64cm^2$ with 4 cm of electrode distance. The maximum voltage decreased by 19~29% when the anode area decreased to $16cm^2$ while only 3~12% of voltage decreased with cathode area decrease. The maximum power density decreased by 49~68% with decreasing anode size, and by 29~47% with decreasing cathode size. These results showed that the anode area had more significant effects than the cathode area on the power generation of SMFC which has a high internal resistance due to a coexistence of soil and wastewater in the reactor.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.23-28
• /
• 2015

This study was performed to investigate the adequate standard pot and number of plants per tree of raising seeding pot on the foxtail millet transplanting culture in the southern province. Due to the various application of wellbeing-health food recently, for upbringing of the foxtail millet, millet and sorghum in minor cereals, R & D and policy support is being promoted actively. The foxtail millet growing season is so short from 90 to 130 days, and it is large variations for a growth temperature. The main results are as follows. When it comes to foxtail millet transplantation, seedling quality of 406 holes, 200 holes and 162 holes of raising seeding pot type were not all significant, and field rooting percentage is accounted for all 94 to 95%. Yield of a foxtail millet was exposed in 406holes 305 kg/10a>162holes 303 kg> 200holes 302 kg order, and it was no significance between test processing. When it's the raising seeding transplanting culture, in case of pot culture, 406holes pot culture were reduced the bed soil cost 63%, pot 50%, working hours 18% for 200holes pot. Transplanting seedling quality per a foxtail millet transplanting culture method, dry weight was high inclination as transplanting number of plant is less, and field rooting percentage displayed more than all 95%. Yield appeared to 2 plants seedling transplanting 315kg/10a> 3 plants seedling transplanting 304kg>1 plant seedling transplanting 256kg order. The projected cost per the pot-sort on the raising seeding transplanting culture of foxtail millet, the seedling transplanting culture of 406holes was reduced 40% percentages compared to 200holes as 76,230won/10a. As a result, 406holes pot and 2plants seedling transplanting culture, labor-saving culture was possible.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.6 no.1
• /
• pp.38-44
• /
• 2007

Purpose: To evaluate status of reconstructed ACL and changes around graft through second-look arthroscopy after arthroscopic reconstruction of the ACL with autograft tendons. Material and Methods: Between Jun. 2003 and Feb. 2007, the second look arthroscopy was performed on 22 cases. Second-look arthroscopy was conducted on average 15.1 $(7\sim31)$ months after reconstruction. 15 cases received hamstring tendon autograft, 7 cases received bone-patellar tendonbone autograft. We measured graft tension using displacement by probing, synovial coverage by visual analysis at second-look arthroscopy The assay in Lysholm score, Lachmann test and KT-2000 arthrometer were evaluated status of reconstructed ACL. Results: The hamstring tendon group showed normal tension in 11 cases and lax tension in 4 cases. The patellar tendon group showed normal tension in 3 cases, lax tension in 2 cases and partial tear in 2 cases. In the hamstring tendon group, synovial coverage was good in 11 cases, half in 3 cases and pale in 1 case, and the bone-patellar tendon-bone group was good in 4 cases and half in 3 cases. The patellar tendon group was superior to the hamstring tendon group in Lysholm score (p<0.05), but insignificance difference in KT-2000 arthrometer results statistically. Conclusion: The hamstring tendon group was superior to the bone-patellar tendon-bone group in second-look arthroscopy after ACL reconstruction with autograft tendons results, but long term follow up will be necessary to further evaluated.

• Journal of the Korean Society of Radiology
• /
• v.5 no.1
• /
• pp.37-49
• /
• 2011

To examine the possible changes in the SNRs, CNRs, and ADC values for lumbar spines with metastasis based on the DW images before and after contrast agent injection taken from metastatic spinal cancer patients using a 1.5 T MR machine. The quantitative analysis revealed that in case of spinal cancer subjects, both SNRs and CNRs at all of those assessed locations significantly increased on the DWI after contrast agent injection compared to before, while on the ADC map images, SNRs significantly decreased. On the other hand, significantly decreased ADC values at all the assessed locations were found on the ADC map images. With reference to the normal group, significantly increased SNRs were found at all of the assessed locations on the DWI image after injection compared to before, while significantly decreased SNRs were found on the ADC map images. Also, significantly decreased ADC values at all the assessed locations were found on the ADC map images. For the qualitative analysis, after contrast agent injection, significantly increased signal intensities were found at the locations with spinal cancer on the DWI. In contrast, significantly decreased signal intensities were found on the ADC map images. The implication from the results showing that SNR and CNR significantly increased while ADC value significantly decreased at, above, and below the location of metastatic spinal cancer on DWI after contrast agent injection is that DWI obtained after contrast agent injection can be made available for wider application to vertebral disorders.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.97-115
• /
• 2008

Introduction The e-government is concerned with using Internet and Web technologies to exchange information and services with citizens, businesses and other related organizations, and it centers on three functions, namely informational, interactive, and transactional [UN, 2001]. Many developed countries like the U.S. have been actively involved in e-government projects, since they enable both more effective public services for citizens and more efficient internal operations. Korea is among these leading countries that are planning to leverage computer and communication technologies to provide for integration of work processes and information as well as convenient access to information and services. For this reason, evaluating e-government projects is becoming a crucial issue for both researchers and policy-makers. However, most research to date has primarily focused on a model of success of an e-government system designed for citizens, overlooking internal systems specifically created for employees working in a public organization. This paper is intended to propose a model to measure the success of a Web-based information system designed for use by internal users at Chungwadae, the executive branch of Korea's central government. The paper is also aimed at applying the model to the assessment of the present system being used at Chungwadae in comparison with the preceding system. Evaluating an e-Government System The most widely cited model of information systems success today is that of DeLone and McLean[1992, 2003, 2004]. The original model states that the success of an information system can be measured using six dimensions, including system quality, information quality, use, user satisfaction, individual impact, and organizational impact. Although the ultimate success of an information system may be reflected in the impact that the system has upon individuals as well as an organization, aspects of using the system such as system use and user satisfaction can play an important role in determining the system success, because the system would be a sheer failure if users don't like and use the system. As a response to criticisms given by numerous researchers, the authors adapted their model to fit the emerging Web-based environment. The revised model[DeLone and McLean, 2003] they offered included an additional quality dimension, namely service quality, and combined individual and organizational impacts into net benefits which can also influence user satisfaction. The e-government system success model can be built around this updated model. Our model incorporates information quality, system quality, and service quality as in the DeLone and McLean model. However, the 'system use' dimension has been replaced by perceived usefulness, as suggested by Seddon[1998]. In addition, because the e-government systems that this paper focuses on are internal public systems used in government agencies, the 'net benefits' dimension has been replaced by perceived work efficiency. Based on the proposed model, a total of nine hypotheses have been formulated which we tested using an empirical analysis. Methods A questionnaire form has been created with items that are designed to examine the relationships among the variables in the model. The questionnaire has been handed over, in person, to 65 members of Chungwadae staff who are now actively using the E-Support System, the present information system created to support internal work at Chungwadae. We made arrangements to meet with each individual who agreed to participate in our survey, and helped to fill out the survey form with explanations. Of the 65 copies that were delivered, only 33 were returned, and 30 responses of these have been adopted for our analysis, since three were not valid. The extremely small sample size was due to the limited number of staff members who had adequate experience required of this study. Results We gathered data from the questionnaire survey and analyzed them using a regression analysis to test the hypotheses. As shown in the table below, the results indicated that all three dimensions of an information system’s quality are positively related to user satisfaction. However, information quality and system quality were found to be positively related to perceived usefulness, while service quality was not. In addition, perceived usefulness is not positively related to user satisfaction, implying that a user may find a system useful, but may not be satisfied with it. Finally, user satisfaction and perceived usefulness both are positively related to perceived work efficiency. This suggests that workers' positive experience with the system is important to guarantee favorable work efficiency. Conclusions We conclude that the proposed model proved useful in measuring the success of an internal information system used by a government agency. To demonstrate the applicability and usefulness of the model in the paper, we applied the model to the assessment of the present internal system used at Chungwadae in comparison with the preceding system. The results showed that the present system outperforms the preceding one in a statistically significant way. Future research will have to focus on applying the model to Korea's governmental agencies other than Chungwadae and examine whether it proves applicable in different types of governmental organizations.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.53-77
• /
• 2008

In recent years, although numbers of corporations are bringing in PMO, they seem to be indifferent to PMO performance measurement. This demonstrates that there are also other reasons beside performance measurement of information systems (IS) project being ambiguous by introducing PMO; the lack of acknowledging the concrete function of PMO, and the scarcity of empirical study about the effect of PMO on the project members and project performance. In this sense, this study is aimed at proposing a new research model in which project success factors (i.e., standardization, management advocacy, and staff expertise) affect PMO capability (i.e., knowledge management, resources management, and problem solving competency) positively, leading to project performance (i.e., task outcomes, psychological outcomes, and organizational outcomes) eventually. To empirically test the research model, data are surveyed from PMO department and IS department. To prove the validity of the proposed research model, PLS analysis is applied with valid 132 questionnaires. By employing PLS technique, the measurement reliability and validity of research variables are tested and the path analysis is conducted to do the hypothesis testing. The path analysis results can be organized into 7 ways in large scale. First, standardization of project success factors has a positive association with knowledge management, resources management, and problem solving competency of PMO capabilities. The findings of this result indicate that the multiple or single project management should satisfy standardization in order to operate an effective PMO. Second, management advocacy of project success factors has a positive association with knowledge management, resources management, and problem solving competency. Management advocacy refers to the willingness of management to provide the required resources and authority for project success. There is agreement among researchers regarding the importance of management advocacy for favorable PMO capability. Third, staff expertise of project success factors has a positive association with knowledge management, resources management, and problem solving competency. The findings of this result indicate that the formation of an exceptional consultant or members with a proficient knowledge for staff expertise of project member is the key factor to elevate the PMO capability. Past research suggests that experience and knowledge and the resultant familiarity with the problem faced can be an important determinant of PMO capability. A capable project with appropriate staff expertise means that it enjoys a diversity of abilities and experiences. Fourth, knowledge management competency of PMO capabilities has a positive impact on psychological outcomes but has no direct effect on task outcomes and organizational outcomes. In domestic case of S. Korea, PMO was finally introduced to many other corporations in 2005 though it started bringing in 2000. Therefore, it had neither a significant impact on the task outcomes nor organizational outcomes by lacking the contents and the infrastructure of the knowledge management because the knowledge consolidation and management period of PMO is comparatively shorter by terms than other foreign nations. Fifth, resources management competency of PMO capabilities has a positive association with task outcomes, psychological outcomes, and organizational outcomes. In addition, problem solving competency of PMO capabilities has a positive association with task outcomes, psychological outcomes, and organizational outcomes. Therefore, the findings of this results stress that PMO capabilities has a positive impact on project performance. Sixth, according to the path analysis of the hypothesis, which suggested in this research, problem solving competency is the PMO capability which is the key success factor for task, psychological, and organizational outcomes as an integrated performance model. Further, the analysis reveals that problem solving competency is an important factor for integrated performance model. The finding is in line with past IS research, which affirms that the work of IS projects is essentially a problem solving endeavor. Seventh, in the path analysis of the hypothesis in this research, the path of the management advocacy $\rightarrow$ problem solving competency $\rightarrow$ organizational outcomes appears to be the most important and strongest path. In brief, the finding of this study suggests that project success factors influence PMO capability positively, and project performance as well. From the results, it can be concluded that PMO helped great improve the project success rate and project performance. This study advances research on PMO capability in three important aspects. First, the findings of our study have implications for IS theory and future research. Our study contributes to IS theory by synthesizing concepts from PMO research and project management research with those in IS research. We proposed and tested PMO capability of IS projects and the findings of our investigation provided some preliminary answers to some of the questions raised. Secondly, this thesis does not only help depicting the concept of IT governance but also approaches empirically. It makes a gradual approach to the main content, step by step, in contrary of simple standard, scholastic way of thinking. Finally, we argued that this task-oriented(technical) view is not sufficient to adequately conceptualize IS project performance. Hence, we applied that the research on organization teams, which provides a flip viewpoint to that of project management research in that it gives more weight for psychological outcomes of organizational work groups, can be very helpful in reconceptualizing the IS project performance construct. The limitations of this study are also discussed to provide research directions for future research.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.90-93
• /
• 2011

Purpose: A Pixelated BSGI gamma camera has features to enhance resolution and sensitivity and minimize the distance between detector and organs by narrow FOV. Therefore, it is known as useful device to examine small organs such as thyroid, parathyroid and gall bladder. In general, when we would like to enlarge the size of images and obtain high resolution images by gamma camera in nuclear medicine study, we use pinhole collimator. The purpose of this study is to evaluate the usefulness of Pixelated BSGI gamma camera and to compare to it using pinhole collimator in thyroid scan which is a study of typical small organs. Materials and methods: (1) The evaluation of sensitivity and spatial resolution: We measured sensitivity and spatial resolution of Pixelated BSGI with LEHR collimator and Infinia gamma camera with pinhole collimator. The sensitivity was measured by point source sensitivity test recommended by IAEA. We acquired images considering dead time in BSGI gamma camera for 100 seconds and used $^{99m}TcO4-\;400{\mu}Ci$ line source. (2) The evaluation of thyroid phantom: The thyroid phantom was filled with $^{99m}TcO4-$. After set 300 sec or 100 kcts stop conditions, we acquired images from both pixelated BSGI gamma camera and Infinia gamma camera with LEHR collimator. And we performed all thyroid studies in the same way as current AMC's procedure. Results: (1) the result of sensitivity: As a result, the sensitivity and spatial resolution of pixelated BSGI gamma camera were better than Infinia's. The sensitivities of pixelated BSGI and Infinia gamma camera were $290cps/{\mu}Ci$ and $350cps/{\mu}Ci$ respectively. So, the sensitivity of pixelated BSGI was 1.2 times higher than Infinia's (2) the result of thyroid phantom: Consequently, we confirmed that images of Pixelated BSGI gamma camera were more distinguishable between hot and cold spot compared with Infinia gamma camera. Conclusion: A pixelated BSGI gamma camera is able to shorten the acquisition time. Furthermore, the patients are exposed to radiation less than before by reducing amount of radiopharmaceutical doses. Shortening scan time makes images better by minimizing patient's breath and motion. And also, the distance between organ and detector is minimized because detector of pixelated BSGI gamma camera is small and possible to rotate. When patient cannot move at all, it is useful since device is feasible to move itself. However, although a pixelated BSGI gamma camera has these advantages, the effect of dead time occurs over 2000 cts/s since it was produced only for breast scan. So, there were low concentrations in organ. Therefore, we should consider that it needs to take tests to adjust acquisition time and amount of radiopharmaceutical doses in thyroid scan case with a pixelated BSGI gamma camera.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.317-322
• /
• 2005

This study was conducted to improve the efficiency of embryo recovery and to establish the protocols of superovulation in Holstein cows. Sixteen Holstein cows were used the test the efficacy of three superovulation regimens using Folltropin. In the case of regimen 1, CIDR plus with E2 capsule was inserted in cows at the random stage of estrous cycle and the total of 400 mg Folltropin V was adminstered twice a day for 4 days(Folltropin V group). In regimen 2, CIDR was inserted and 3.0 mg estradiol benzoate was administered i.m. next day and the total of 400 mg Folltropin was adminstered twice a day for 4 days(Folltropin V+EB group). For regimen 3, CIDR insertion was same as in the regimen 2 and the total of 400 mg Folltropin diluted with $10\%$ PEG 8,000 was administered once(Folttropin V+PEG 8,000 group). In all the regimens, CIDR were removed on 12th day and 45 mg dinoprost was administered i.m. simultaneously. The heat detected donors were administered 200 ug LH-RH and inseminated twice with 2 straws of frozen semen 12 hours apart. Embryo were collected using Foley catherter in each uterine homs on 6${\~}$8 days after inseminations. The evaluation of collected embryos were according to the IETS manual. The CL responses according to the superovulation treatments were 5.8, 20.6, 24.0 in the Folltropin V, Folltropin+EB and Folltropin V+PE 8,000 groups, respectively and there were significant different among the treatments(p<0.01). Transferable embyos collected were 3.6$\pm$2.4, 3.3$\pm$l.8 and 2.8$\pm$2.3, in the Folltropin V, Folltropin+EB and Folltropin V+PE 8,000 groups, respectively. Degenerated and unfertilized embryos in regimen 2 and 3 than regimen 1. These results indicates that superovulation treatments with both multiple injections and a single injection using PEG of Folltropin combined with CIDR insertion at the random stage of estrus cycle can be used to produce Holstein embryos.