• Architectural research
• /
• v.20 no.3
• /
• pp.83-92
• /
• 2018

Recently, there has been inter-Korean exchanges are active, in company with an assertive international activity with North Korea and inter-Korean Summits. Thus, there is a growing possibility of Korean reunification. However, when the unification situation occurs, population inflow by North Korean residents will be expected, and it will be necessary to prepare a housing supply strategy. In addition, even if North Koreans are prevented from entering, a plan is necessary to ensure structural safety since most buildings in North Korea are aging and a recent natural disaster occurs frequently. In this research, we will try to present a temporary housing supply strategy and a short-term structural reinforcement plan based on analysis of the standard housing conditions in North Korea. In this research, we represent the analysis result of the existing construction level, supply status and structural performance of North Korea. When we consider the reinforcement period and social costs, a short-term reinforcement plan is recommended rather than the full reinforcement of the aged housing in North Korea. Furthermore, we examine the ways to secure the residential safety of North Koreans through a case study of domestic and overseas temporary residential facilities, until the permanent residential facilities were supplied. According to the analysis, the tent houses were used as a form of relief housing in overseas frequently. However, the tent house is difficult to apply for domestic country with clear seasons due to insulation and heating problems. Therefore, it is appropriate to develop a residential supply strategy as focusing on the temporary housing facilities in assembled or container from, in preparation for the future population inflow.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.44-53
• /
• 2004

This paper aims at presenting high quality at low resolution apply by a new antialiasing method for voxelized implicit surfaces. Implicit surfaces create a unique type of 3D-modeling. Some use of implicit surfaces are scientific and medical visualization, animation, medical simulation and interactive modeling. One of previous antialiasing methods for implicit surfaces presented by raytracing or texture mapping is making use of a stochastic sampling. But this method requires more calculation time and costs which is caused by complicated and difficult implicit functions. In the meanwhile, voxelized implicit surfaces generally use high resolution for good quality images but it costs to generate. In order to this problem, this paper suggests a shifted double Z-buffer which is very simple, more efficient and easy. Tn addition, there are applied box-filter and tent-filter to the double Z-buffer antialiasing method for better images. For results this method generate high quality image and it is easy to apply to various filters and is able to extend to multi Z-buffer.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.509-526
• /
• 2016

Purpose: We would like to find the alternative method for the weathering test on rubber coated fabrics and adhesive-coated fabrics for the military products, KS M 0706 (Sunshine carbon arc) to KS M ISO 4892-2 (Xenon arc). Methods: We measured the tensile strength of adhesive-coated fabrics and adhesive products treated with sunshine carbon arc and xenon arc during 100, 150 and 200 hours, respectively. All of the results were treated with statistical test, ANOVA method. We also validate the surface modifications caused by treatment method and time by using FT-IR ATR and, SEM. Results: In case of the thick adhesive-coated fabrics (app. 1 mm), there was no distinctive difference on tensile strength by treatment method and time. In case of the thin mask hood (app. 0.22 mm) and TENT (app. 0.5 mm), there was distinctive difference on tensile strength. Especially, carbon arc showed a huge lowering properties. We could validate the curing from light and moisture, and the functional group change from cross-linking and oxidation using FT-IR ATR. In case of IBS, there was a surface cracks on SEM images. In case of mask hood, there was no distinctive differences, except for a particle falling from decreased affinity between rubber and particles caused by carbon arc. Conclusion: We concluded that there was no problems for changing xenon arc weathering test with same treatment time on IBS, KM7, K21 and adhesive products. In case of TENT and mask hood, there was a difference in tensile strength in accordance with the change of the treated time and method.

• 한국기계연구소 소보
• /
• s.9
• /
• pp.169-181
• /
• 1982

This paper presents three methods for ship hull form improvement on the basis of wave pattern analysis. These methods are primarily based on the assumption that a linear relation exists between the small difference of hull sections and the difference of the wave amplitude functions. The improved hull form of ship is made by superposing a thin hull form on that of a parent model. The first method use the simplification of framelines and Michell's Theory to the formula of wave resistance for superposed thin ship. The second method use tent functions and Michell's Theory to that. And the third is experimental method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.94-101
• /
• 2001

In this paper, the combustion improvement effects of alcohol-diesel oil blend fuel were investigated in a visualization engine. As a result of experiment, it was found out that the combustion chamber of deep dish type and re-entrant type at the same operation condition. However, when the con-tent of alcohol exceeded 10% of total fuel delivery, the combustion of alcohol-diesel oil blend fuel was worse than that of diesel oil. The maximum blend quantity of ethanol which is not ignited in the re-entrant type combustion chamber was estimated at approximately 40% of total fuel delivery. So, it is necessary to blend appropriate quantity of a volatility fuel such as alcohol in order to improve combustion.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.270-274
• /
• 2006

This paper proposes a Chaos Pulse Width Modulation(CPWM) technique. For generating the chaotic numbers by chaos phenomenon, chaos area $\lambda$=0.99 in bifurcation tree of the proposed double tent mapping is used. A micro-controller is used for the generation of chaos numbers and triangular carrier with chaotic frequency is obtained through the process of frequency modulation according to the generated chaos numbers. The experiments are executed with the 1.5kw induction motor coupled with a 2.5A load. The experimental results show that the voltage / current spectra are spread to a chaotic range, and the switching noise of motor is reduced by the proposed method compared to the fixed frequency PWM method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.647-650
• /
• 2005

Gas hydrates draw great at tent ion recently as a new clean energy resources substituting conventional oil and gas hydrate its presumed huge amount of volume reaching 10 trillion tons of gas and environmentally friendly characteristics. Gas hydrate can contribute to the rapidly increasing consumption of natural gas in Korea and achieve the self support target by 2010 which is $30\%$ of total natural gas demand. This paper shows the importance and benefit of Gas hydrate comparing with new & renewable energy in Korea

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.7-12
• /
• 1998

The waste sludge is by-produced about 20-30% of total production and arised to the severe problems of this mine's surrounding environmnet. This study was invested the composition of component, particle of size of the waste sludge by Chemical Analysis, X, R, D, Particle Size Analyzer and the physical properties (air content, slump, strength, etc) of concrete when the waste sludge is added into concrete. so, It's recomended the proper content of the waste sludge to be added into concrete. and then, is verified to be applied at batch plant in field. Above the results, the recomeded content of the waste sludge is about 2-4% (about 4-8% in cement) in aggregates and when it's added the recomended content, they are detected to be more or less changed the physical properties of concrete, ( equally strength and durability, little less air con tent, little increased shinkage, etc). but the application of the recomended content don't arise the problem of the basic quality control of concrete and physical properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1126-1132
• /
• 2002

In this paper, we propose a new scheme of motion tracking based on fuzzy inference (Fl) and wavelet transform (WT) from image sequences. First, we present a WT to segment a feature extraction of dynamic image . The coefficient matrix for 2-level DWT tent to be clustered around the location of Important features in the images, such as edge discontinuities, peaks, and corners. But these features are time varying owing to the environment conditions. Second, to reduce the spatio-temperal error, We develop a fuzzy inference algorithm. Some experiments are performed 0 testify the validity and applicability of the proposed system As a result, proposed method is relatively simple compared with the traditional space domain method. It is also well suited for motion tracking under the conditions of variation of illumination.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.112-115
• /
• 2004

The government is in progress the traditional retail market redevelopment and remodeling due to atrophy of the traditional retail market in accordant to opening of the circulation market and changing of the consuming patterns. However, it seemed that primitive project was limited to the environment improvement scope. As the shopping environment which is comfortable to the consumers is provided and the design which considers a traditional retail market specific quality is applied from business plan early. It will be useful for the management normalization of traditional retail market actually. The spatial factors were analyzed as follows. 1. The circulation of consumer should be secured to make boundary line of the pass way. 2. The display booth should be standardized for the security of sight. 3. The signage panel should be consolidated in according to the plan. 4. The street vendor's handcart and tent should be arranged for circulations and the vision line.