• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.39-43
• /
• 2002

A new model for heat transfer and thermal deformation analysis according to strip mm in coiling process has been proposed. Finite difference analyses for heat transfer of cold rolled coil have been carried out under various coiling tensions and strip crown using the equivalent thermal conductivity for the radial direction of cold rolled coil which is a function of strip thickness, surface characteristics and compressive pressure. The compressive pressure is calculated from a equation expressed as a function of hoop stress and coil tension considering strip mm obtained by experiment. Finite element method for thermal deformation of cold rolled coil has been performed to investigate the effects of the strip crown, the coil tension and temperature. From these analyses, it is found that the axial inhomogeneity of thermal deformation is increased as the strip crown, compressive pressure, and temperature drop in cold coiled strip increase.

• 대한치과교정학회지
• /
• 제22권2호
• /
• pp.297-308
• /
• 1992

The effect of orthodontic force on the collagenase and phosphatase activities of the adjacent alveolar bone was evaluated. Maxillary canines of male cats were treated orthodontically with closed coil spring so as to exert about 80g force. Sixteen cats were equally divided into one control group and seven experimental groups (12 hrs, 24 hrs, 36 hrs, 2 days, 3 days, 5 days and 7 days after orthodontic treatment). After sacrificing all animals on experimental intervals, collagenase, acid phosphatase (ACP) and alkaline phosphatase (ALP) activities were determined in the pressure and tension sides of alveolar bones. ACP activities increased in both the pressure and tension sides, but significantly increased in the pressure side continuously. ALP activities increased in the tension side at early stage (1-2 days after treatment), but changed small amount in the pressure side. Collagenase activities increased in the pressure side, especially at late stage (5-7 days after treatment). These results suggest that (1) orthodontic fore force increases the ACP, ALP and collagenase activities generally and (2) activities of ACP and collagenase increase in the pressure side, but that of ALP in the tension side and (3) activities of ACP and ALP increase at early stage, but that of collagenase at late stage after orthodontic treatment. Therefore it is shown that there are time differences in the formation and destruction of organic and inorganic components in the bone metabolism of alveolus with application of the orthodontic forces.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.701-706
• /
• 2005

Pipes, tubes. and tubular sections with external transverse high fins have been used extensively for heating cooling, and degumidifying air and other gases. This work was performed to investigate an air side heat transfer charactieristics of minichannel with tension wound transverse fin. This estimate was confirmed conversion heat capacity the air side surface area enlargement and heat transfer charactieristics performed available inlet tube side hot water mass flux or outlet tube side air frontal air velocity. The most suitable tension wound transverse finned minichannel was measured extremely low in air side pressure drop and fin effectiveness $3.3\~4.4$. The pressure drop $0.9\~2.8Pa$ was ranged frontal air velocity $0.5\~1.2m/s$. It is also appeared that heat transfer in air side could be better conversion heat area which has been increased $330\%$ of heat capacity compared with the bare tube.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.66-72
• /
• 2012

Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper gives a description of an experimental study of the ultrasonic welding of metals. A horn suitable for 40,000Hz was attached to the ultrasonic metal welder in order to weld Cu sheet. The Cu sheet welding was done with different amplitude, pressure and welding time, and its maximum tension was measured. Maximum tension of 177.99N was obtained when the pressure was 2.5bar, amplitude was 80%, and welding time was 0.34sec. Therefore, excessive welding condition negatively influences maximum tension measurement result.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.105-114
• /
• 1998

Using finite elements, a simulation is prformed for the pipe systems to investigate free vibrational characteristics, that is natural frequencies, considering the intial tension due to the velocity and the pressure of the inside fluid flow. To confirm the program developed in this study, the results are compared with the results of commercial software ANSYS. When the initial tension is neglected in curved pipes, the natural frequencies are reduced as flow velocity increases, and the rapid decreases of the natural frequencies took place. However, when the initial tension is taken into account, the natural frequencies are not changed with the change of the flow velocity. In free vibrational simulation of pipe systems, it is necessary to calculate the initial state force due to the velocity and the pressure of the fluid flow from the equilibrium first, then the force should be included in the equation of motion of the systems to get more accurate natural frequencies.

• 공업화학
• /
• 제7권1호
• /
• pp.101-108
• /
• 1996

본 연구에서는 수용액 내에서 생분해도가 우수하고 인체에 mild한 비이온성 계면활성제 GL12와 범용 음이온성 계면활성제인 linear laurylbenzene sulfonate(LAS) 또는 sodium polyoxyethylene(3) glycol lauryl ether sulfate(SLES) 각각 용액의 dynamic surface tension과 이들 계면활성제 혼합용액의 dynamic surface tension이 혼합비에 따라 어떻게 변화되는지 maximum bubble pressure method를 이용하여 조사하였다. 또한 salting-cut 효과가 있는 NaCl, CsCl과 salting-in 효과가 있는 요소를 계면활성제 용액에 첨가하여 이들 염들이 용액의 dynamic surface tension에 미치는 영향에 대하여도 연구하였다. 비이온성 계면활성제인 GL12의 dynamic surface tension은 염의 존재에 영향을 크게 받지 않았으나 음이온성인 SLES와 LAS는 크게 영향을 받았다. 또한 GL12/SLES와 GL12/LAS 혼합계에서도 GL12의 함량이 많을수륵 용액의 dynamic surface tension에 대한 염의 영향이 감소하였으나 LAS 또는 SLES의 함량이 증가할수록 염의 영향은 증가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.139-145
• /
• 1998

Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3805-3809
• /
• 2012

Results for molecular dynamics simulation method of small liquid drops of argon (N = 1200-14400 molecules) at 94.4 K through a Lennard-Jones intermolecular potential are presented in this paper as a preliminary study of drop systems. We have calculated the density profiles ${\rho}(r)$, and from which the liquid and gas densities ${\rho}_l$ and ${\rho}_g$, the position of the Gibbs' dividing surface $R_o$, the thickness of the interface d, and the radius of equimolar surface $R_e$ can be obtained. Next we have calculated the normal and transverse pressure tensor ${\rho}_N(r)$ and ${\rho}_T(r)$ using Irving-Kirkwood method, and from which the liquid and gas pressures ${\rho}_l$ and ${\rho}_g$, the surface tension ${\gamma}_s$, the surface of tension $R_s$, and Tolman's length ${\delta}$ can be obtained. The variation of these properties with N is applied for the validity of Laplace's equation for the pressure change and Tolman's equation for the effect of curvature on surface tension through two routes, thermodynamic and mechanical.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3039-3042
• /
• 2012

Pressure tensors at the planar surface of liquid-vapor argon are evaluated from the virial theorem, Irving-Kirkwood, and Harasima versions using a test-area molecular dynamics simulation method through a Lennard-Jones intermolecular potential at two temperatures. We found that the normal and transverse components of the pressure tensor, $p_N(z)$ and $p_T(z)$, obtained from the virial theorem and Harasima version are essentially the same. The normal component of the pressure tensor from Irving-Kirkwood version, $p_N^{IK}(z)$, is shown to be a nearly constant at the lower temperature, independent of z, as agreed in a previous study, but not for $p_N^H$(z), while the transverse components, $p_T^{IK}(z)$ and $p_T^H(z)$, are almost the same. The values of surface tension for both versions computed from $p_N(z)-p_T(z)$ are also the same and are fully consistent with the experimental data.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.135-148
• /
• 1997

옹벽에 작용하는 토압을 구하기 위하여 Coulomb이론이 실무에 대부분 사용되고 있지만, 전수평토압의 작용위치를 구할 수 없으므로 토압분포를 삼각형 분포라고 가정하고 있다. 그러나, 수 많은 실내 및 현장실험을 통하여 토압분포가 그렇지 않다는 것으로 규명되었다. 이러한 문제를 극복하기 위한 이론적인 접근이 Handy(1985), Kingsley(1989), Kellogg(1993), 정성교(1993, 1996a) 등에 의하여 비 점성토로 뒤채움된 옹벽에 대하여 수행되었다. 점성토로 뒤채움된 옹벽에 대한 기존의 이론적 접근은 단지 Rankine또는 Coulomb 이론에 근거하여 주로 수행되었지만, 그 이론들은 제각기 다른 결과를 보여주었다. 여기서는 점성토로 뒤채움된 중력식옹벽에 작용하는 수평토압을 위한 이론적 접근이 비배수 조건하에서 수행되었다. 이 접근은 Coulomb의 가정에 바탕을 두고 아칭개념을도입하였으며, 인장균열을 무시한 경우와 고려한 경우에 대하여 각각 이론식이 유도되었다. 그리고, 몇가지 조건에 대한 비교결과에서 인장균열을 고려한 토압이론식의 적용이 합리적일 것으로 사료되었다.