• Korean Journal of Community Nutrition
• /
• v.26 no.4
• /
• pp.249-258
• /
• 2021

Objectives: This study aimed to compare the factors of dietary and health behavior according to the employment in women in early adulthood and to analyze their relationship. Methods: In this study, adult women aged 20~29 who participated in the Korea National Health and Nutrition Examination Survey (KNHANES) 2016~2019 were classified into two groups depending on their permanent worker status, namely tenured employees (n = 254) and temporary employees (n = 377). Dietary habits (prevalence of skipping meals, food nutrition label use, etc.), nutrient intake, and metabolic syndrome factors were analyzed. Results: The tenured employees' group showed a significantly lower proportion of subjects who skipped breakfast (P = 0.0254) and significantly higher daily energy intake (P = 0.0264) than the temporary employees' group. However, there were no significant differences in the intake of energy nutrients and most of the micronutrients per 1,000 kcal of energy intake between the two groups. The proportion of subjects who consumed energy nutrients under 75% of the estimated energy requirement (EER) was 38.11% in the tenured employees' group, which was significantly lower than the 48.30% in the temporary employees' group (P = 0.0159). In economically active women aged 19~29 years, the odds ratio of low HDL-cholesterolemia prevalence was 1.80 times higher (95% CI, 1.06-3.06) in the temporary employees' group compared to that in the tenured employees' group after adjustment for confounding factors (P = 0.0295). Conclusions: In conclusion, among Korean adult women in their twenties, temporary employees showed inappropriate eating habits such as skipping breakfast, and had abnormal blood lipid levels.

• The Korean Journal of Health Service Management
• /
• v.10 no.3
• /
• pp.235-244
• /
• 2016

Objectives : Using several waves of the Panel Study of Worker's Compensation Insurance(PSWCI), this study analyzed the effect of female workers on the health and lifestyles of korean workers in the sample year of 2014 (The first survey was completed in August-October 2013;, the second survey was completed in August-October 2014.) Methods : The research subjects were 24,672 women among workers who responded to the 2014 PSWCI panel report. Statistical analyses were performed with SAS version 9.4 (SAS Institute Inc., Cary, NC, USA). Results : According to the results of the analysis, women showed differences in female temporary workers, working conditions, classification of occupation, working period, and health conditions based on work-time conditions. The results show that female workers with disabilities have a direct positive effect on life satisfaction as we anticipated in the hypothesis. Conclusions : Female workers should focus on factors identified in this study when developing employment interventions to improve a health promoting lifestyle for their work environment.

• Journal of Labour Economics
• /
• v.24 no.2
• /
• pp.95-123
• /
• 2001

One of the most pronounced phenomenon among the changes in the 1990s' Korean labor market is the growth of the share of temporary and daily workers. Yet, it is still not clear exactly how the phenomenon should be interpreted. In order to look into the phenomenon, the paper introduces various definitions of employment status based upon multi-dimensional classification criteria and estimates their sizes using the EAPS Supplemental Survey of August 2000 by the National Statistical Office of Korea. According to the data set, the share of temporary employment by the OECD standards is 17.6% which is higher than most European countries but not far away from them unlike some popular claims. Further, it is shown that the high proportion of temporary and daily workers among the employees, currently above 50%, is possibly due not only to the increased employment instability but also to the widened differentiation among workers in terms of fringe benefits such as the retirement pay and social insurances.

• Economic Analysis
• /
• v.25 no.3
• /
• pp.1-29
• /
• 2019

This paper examines the impact of a dual labor market structure on labor productivity using unbalanced panel data from 29 OECD member countries between 1990 and 2015. By applying a variety of regression models on the panel data (e.g., a pooled regression, a fixed effects model and a GMM), we explore how changes in worker-type composition among temporary, permanent and self-employed workers contribute to productivity growth. While it appears that our results differ slightly, depending on the econometric models, overall an increase in the share of permanent workers leads to a relatively higher increase in productivity growth. On the other hand, it is also seen that the effects of the share of temporary workers on labor productivity are considerably lower than that of permanent and self-employed workers. To sum it up, our findings indicate that an increase in temporary workers could have an adverse effect on labor productivity.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1113-1116
• /
• 2009

The attempt to use a 3D model each field such as design, structure, construction, facilities, and estimation in the construction project has recently increased more and more while BIM (Building Information Modeling) that manages the process of generating and managing building data has risen during life cycle of a construction project. While the 2D Drawing based work of each field is achieved in the already existing construction project, the BIM based construction project aims at accomplishing 3D model based work of each field efficiently. Accordingly, the solution that fits 3D model based work of each field and supports plans in order to efficiently accomplish the relevant work is demanded. The estimation, one of the fields of the construction project, has applied BIM to calculate quantity and cost of the building materials used to construction works after taking off building quantity information from the 3D model by a item for a Quantity Take-off grouping the materials relevant to a 3D object. A 3D based estimation program has been commonly used in abroad advanced countries using BIM. The program can only calculate quantity related to one 3D object. In other words, it doesn't support the take-off process considering quantity of a contiguous object. In case of temporary materials used in the frame construction, there are instances where quantity is different by the contiguous object. For example, the formwork of the temporary materials quantity is changed by dimensions of the contiguous object because formwork of temporary materials goes through the quantity take-off process that deduces quantity of the connected object when different objects are connected. A worker can compulsorily adjust quantity so as to recognize the different object connected to the contiguous object and deduces quantity, but it mainly causes the confusion of work because it must complexly consider quantity of other materials related to the object besides. Therefore, this study is to propose the solution that automates the formwork 3D modeling to efficiently accomplish the quantity take-off of formwork by preventing the confusion of the work which is caused by the quantity deduction process between the contiguous object and the connected object.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.557-564
• /
• 2013

Unsafe and dangerous factors or environments on building construction sites often cause safety accidents. Sometimes, accidents happen despite the existence of warning and caution signs. Such warning signs are likely to be hidden by stacked materials or temporary facilities on site. If workers cannot see the signs when moving or working, they could be injured, sometimes fatally. Many studies have focused on each worker's position, and various systems have been developed using GPS signals and sensors. This paper suggests a method for identifying the problem of worker inability to see the unsafe factors, to manage the problem in the construction planning phase by considering things from the worker's perspective. The method uses CAD software to investigate the relation between the height of stacked materials and the visible ratio of the unsafe factor. The results of a sample project show that the changes in the height and location of stacked materials make the site safer.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.849-860
• /
• 2005

This Paper analyzed activities of the average time use survey in 1999 and 2004 by Korea National Statistical Office. The survey of National Statistical Office considered general analysis for activities like that personal care(eating), employment and study, leisure, travel by purpose. Change of time of living causes a lot of effects on society whole economy, culture etc., and is used basic data in policy proposal of the country and enterprise's marketing operation establishment. Analysis for average time could look at change in a role of gender, holiday of saturday's enforcement and increasing of temporary post. Using this analysis we can do more developed and analytical sociological study.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.10-17
• /
• 1996

With the ever-increasing important of high-speed information in society as we move towards the 21 st century. Interior design and it's working condition has been changed a great deal included a sort of each special character and make a difference against the others. It used to be find a great poles asunder of worker's safety and project quality according to the environmental dimension of interior construction field as if they should be a pleasantness or poor condition. This research aimed to improvement of environmental construction field of interior with construction engineers and particular interior labors in 4 phases as : ⅠThe preparatory phase : -Secure a Budget, Environmental safety supervisor -Fix of Design quality, Construction period. -Choice of Construction method, Sub constructing Ⅱ. Starting work phase ; -Capacity , Safety of temporary power line. -Carriage, Stock of Material -Safety of Electronic tools, -Personal protector. Ⅲ. Working period ; -Ventilation, I illumination of working place. -Measurement of environmental working condition Ⅳ.Finish working phase ; -Analysis of measurement data. -Evaluation and making up for the weak point. -Keeping data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.93-99
• /
• 2020

In terms of construction work, the construction cost is lower than the importance of the construction, and since it is demolished after the completion of the construction, it is treated as a relatively small proportion compared to other construction types. Construction engineers who actually worked on the site talk about the safety of the construction work as the most important work of the various processes to ensure the quality and safety of the construction work. However, it is also true that safety management is difficult for temporary construction because various types of temporary materials are installed at various sites at the same time as construction progresses, and the main construction is carried out using them. Safety accidents in construction work are not much different even if they are carried out in temporary construction. The importance and safety of construction work cannot be neglected in view of the recent trend of large-scale construction, multi-purpose, excavation of large-scale underground spaces, and construction trends that are changing to skyscrapers. The purpose of this research is to secure the safety of Dongbar among the temporary materials used in construction work by using IT convergence technology, and to propose safety management to prevent safety accidents in the construction work.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.765-778
• /
• 2021

The purpose of this study is to prevent fire accidents in advance by deriving prior knowledge among groups about temporary fire-fighting facilities of workers at construction sites and devising appropriate improvement measures. The findings are as follows.First, in the case of fire extinguishers, statistical attention was paid to the contractor, supervisor, partner worker and fire extinguisher manager between designations. 87% of fire managers and 70% of facility supervisors said fire extinguisher management managers needed to be designated for each type of construction, which requires designation of fire extinguisher management managers, frequently checking and relocating. Second, in the case of simple fire extinguishing facilities, statistical attention was paid to the application of penalties for unauthorized use of fire extinguishing facilities with construction companies, supervisors, and business partners.Third, in the case of emergency alarm measures, statistical attention was paid to the application of emergency alarm sound to temporary broadcasting facilities with construction works, supervisors, and business partners.Fourth, in the case of induction, statistical attention was paid to the application of connection between construction works, supervisors, and partner workers, such as passage guidance, emergency lighting, etc.It was found that 65% of construction workers and 55% of electrical workers had different applications such as aisle guidance and emergency lighting for each type of business partner. In order to resolve blind spots such as evacuation zone guidance due to the structure of the building, it is necessary to easily distinguish the direction of the entrance door from a long distance by applying it in conjunction with passage guidance lights and emergency lighting.