• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1720-1730
• /
• 1995

Finite-difference analysis was conducted to study the natural convection of a stably stratified salt-water solution in an annulus due to lateral heating. The main purpose of this study is to examine in detail the multi-layered flow structure. Calculation was thus made for R $a_{\eta}$=2*10$^{5}$ and 6.5*10$^{5}$ . Formation of layered flow structure, merging process of layers, the corresponding temperature and concentration distributions, Nusselt number variations with time are examined. Numerical results show that in each layer, the temperature profile looks 'S`-shaped and the concentration profile is uniform due to the convective mixing. The formation of the roll and the layer is governed by natural convection due to the temperature gradient and the merging process of the layer by diffusion of the concentration.ation.

• 한국지반환경공학회 논문집
• /
• 제16권6호
• /
• pp.39-43
• /
• 2015

This study extends the Distributed Temperature Sensing (DTS) application to delineate the saturated zones in shallow sediment and evaluate the groundwater flow in both downward and upward directions. Dry, partially and fully saturated zones and water level in the subsurface can be recognized from this study. High resolution seepage velocity in vertical direction was estimated from the temperature data in the fully saturated zone. By a single profile, water level can be detected and seepage velocity in saturated zone can be estimated. Furthermore, thermal gradient analysis serves as a new technique to verify unsaturated and saturated zones in the subsurface. The vertical seepage velocity distribution in the recognized saturated zone is then analyzed with improvement of Bredehoeft and Papaopulos' model. This new approach provides promising potential in real-time monitoring of groundwater movement.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.35-38
• /
• 2004

We developed a Near Real-Time Validation System (NRVS) for the Level-2 Products of AQUA Satellite. AQUA satellite is the second largest project of Earth Observing System (EOS) mission of NASA. This satellite provides the information of water cycle of the entire earth with many different forms. Among its products, we have used five kinds of level-2 geophysical parameters containing rain rate, sea surface wind speed, skin surface temperature, atmospheric temperature profile, and atmospheric humidity profile. To use these products in a scientific purpose, reasonable quantification is indispensable. In this paper we explain the near real-time validation system process and its detail algorithm. Its simulation results are also analyzed in a quantitative way. As reference data set in-situ measured meteorological data which are periodically gathered and provided by the Korea Meteorological Administration (KMA) is processed. Not only site-specific analysis but also time-series analysis of the validation results are explained and detail algorithms are described.

• 대한기계학회논문집
• /
• 제1권4호
• /
• pp.196-202
• /
• 1977

The solidification process in a cylinder with finite thickness in studied by explicit finite difference method. The temperature distribution, the solidification front profile and the dischrged latent heat for the process are obtained. It is found that the solidification front profile is almost linear except in the vicinity of the initation of phase change. This result motivates us to use linear relations between the position of solidification and time for approximate calculations.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.325-331
• /
• 2011

내환경 시험시 시험물체가 요구시험온도가 되게 온도시험조를 가열 또는 냉각하는 계단형 온도시험 프로파일에서 적정 촉진온도 유지시간을 예측하는 집중용량법에 의한 새로운 해석적 방법을 제안하였다. 해석은 주어진 온도시험조건에 대해 시험시간을 줄이고 에너지를 절약하는 촉진시간이 존재함을 보여주고 있다. 이론결과는 작업소재로 강을 사용한 몇 가지 실험결과와 비교적 잘 부합하고 있다. 제안된 적정촉진시간은 동일재료에 대해 시편의 질량/표면적비와 근사적으로 비례한다.

• 한국농림기상학회지
• /
• 제3권4호
• /
• pp.199-205
• /
• 2001

넓은 지역에 걸친 병 예찰모형의 동시 다지점 적용은 지역특이적 식물 병 관리체계 구축을 위한 전제조건이다. 예찰모형의 구동변수로서 군락내부 기온자료 역시 충분한 공간해상도와 공간범위로 준비되어야 한다. 생육중기의 여 군락기온구조에 관한 실측정보를 토대로 만들어진 실용성 있는 광역 군락기온분포 예측 기법을 제시한다. 이앙 후 한 달째부터 출수기까지 벼 군락 내 기온 연직구조의 경시변화를 관측하여 맑은 날, 흐린 날, 비오는 날의 군락외부기온(250 cm)과 군락내부기온(10cm)간 편차의 경시변화양상을 정량화 하였고, 이를 토대로 군락외부 기온값이 주어지면 군락내부 임의높이의 기온을 추정할 수 있는 경험식을 작성하였다. 벼논의 경우 맑은 날 인근 관측노장 대비 전국적으로 0.6~1.2$^{\circ}C$ 낮다는 사실을 근거로 기온 공간내삽시 지표피복 특성이 벼논인 경우의 보정량을 결정하였다. 전라남북도 지역을 대상으로 기상청 정규관측소의 매 시간 관측값을 공간내삽 함으로써 초지로 덮여있는 가상지형상의 기온표면을 1km$\times$1km 해상도로 생성하였고, 위성영상자료의 분석을 통해 이들로부터 벼논에 해당되는 픽셀만 추출하여 기온 하강분을 보정함으로써 군락외부 기온을 준비하였다. 벼논특성을 가진 픽셀에 준비된 군락내부 기온추정식을 각각 적용하여 층위별 기온값을 추정하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.242-251
• /
• 1999

The temperature distribution over the work roll length was estimated by solving a 2-dimensional heat transfer equation based on the rolling conditions and the thermal boundary conditions. In order to solve the governing equation, a finite volume method was employed. In the rolling conditions, the strip temperature, the contact time between roll and strip, the roll speed, the strip thickness, the rolling force and the rolling and idling time were used as input data. In order to verify the accuracy of temperature estimation, roll surface temperatures were measured in the roll shop. The measured temperatures showed a good correlation with the calculated ones.

• 대한원격탐사학회지
• /
• 제25권2호
• /
• pp.155-163
• /
• 2009

여름철 우리나라 서해 연안을 관측한 SAR영상에서 다수의 내부파가 관측되고 있으며 이들은 동지나해에서 관측되는 내부파들에 비하여 소규모이며 상대적으로 많은 연구가 이루어지지 않고 있다. 이러한 내부파들은 여름철 표층 해수의 혼합을 발생시킴으로서 해양 생물학적으로 중요한 역할을 하며 대륙붕에서의 퇴적물 이동 및 음파의 전달에 있어서도 중요한 요소로서 서해의 물성 특성 연구에 있어서 반드시 고려되어야 한다. 내부파의 특성 분석을 위해서는 시공간적인 정보가 필요하며 이를 위해서는 현장 관측과 위성 관측이 동시에 이루어져야 한다. 본 연구에서는 2002년 5월 29일 현장 관측과 동시에 획득된 SAR영상을 분석하고 영상에 나타난 내부파와 동일한 내부파를 시간에 따른 수심별 등온선의 변화에서 분석 추적하였다.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.701-707
• /
• 2004

High aspect ratio silicon structure through deep silicon etching process have become indispensable for advanced MEMS applications. In this paper, we present the results of modified Bosch process to obtain anisotropic silicon structure with conventional Inductively Coupled Plasma (ICP) etcher instead of the expensive Bosch process systems. In modified Bosch process, etching step ($SFsub6$) / sidewall passivation ($Csub4Fsub8$) step time is much longer than commercialized Bosch scheme and process transition time is introduced between process steps to improve gas switching and RF power delivery efficiency. To optimize process parameters, etching ($SFsub6$) / sidewall passivation ($Csub4Fsub8$) time and ion energy effects on etching profile was investigated. Etch profile strongly depends on the period of etch / passivation and ion energy. Furthermore, substrate temperature during etching process was found to be an important parameter determining etching profile. Test structures with different pattern size have been etched for the comparison of the aspect ratio dependent etch rate and the formation of silicon grass. At optimized process condition, micropatterns etched with modified Bosch process showed nearly vertical sidewall and no silicon grass formation with etch rate of 1.2 ${\mu}{\textrm}{m}$/ min and the size of scallop of 250 nm.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.328-333
• /
• 2005

Finite difference model and dynamic thermal property evaluation system were developed to estimate convection heat transfer coefficient by modeling temperature-time profile of beef cube in continuous flow sterilizing system. As input parameters of the model, specific heat and thermal conductivity values of beef frankfurter meat were independently measured from 20 to $80^{\circ}C$. Convection heat transfer coefficient was estimated by comparing simulated and measured temperature-time profiles. Actual temperature-time profiles of meat cube were measured at flow rates of 15, 30, and 45 L/min and viscosities from 0 to 15 cp, and mean values of convection heat transfer coefficients ranged from 792 to $2107\;W/m^2{\cdot}K$. Convection heat transfer coefficient increased with increase in flow rate and decreased as viscosity increased.