• 한국추진공학회지
• /
• 제17권1호
• /
• pp.1-8
• /
• 2013

단일액체추진제 하이드라진 추력기는 간단한 구조, 우수한 추진제 저장성, 깨끗한 반응생성물 기체 등과 같은 장점으로 수많은 우주비행체의 궤도 및 자세제어시스템으로 적용되고 있다. 우주발사체의 자세제어시스템에 적용하기 위한 중형급 하이드라진 추력기가 설계 제작되었으며, 성능검증을 위해 수행된 개발모델 추력기의 지상연소시험 결과를 추력, 임펄스 비트, 그리고 엔진 구성품별 온도 및 압력 등을 통하여 제시한다. 개발모델 엔진은 매우 우수한 추력 응답성과 재현성을 보였고, 그 추력성능 효율은 이론설계치 대비 93% 이상임을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.350-359
• /
• 1999

초임계유체로써 물, 28% 암모니아 수용액, 암모니아에 대한 폐타이어의 전환율과 오일수율을 비교하였다. 같은 온도와 압력에서 초임계암모니아에 의한 전환율이 가장 높았다. 본 논문에서는 전환율이 가장 높은 초임계암모니아를 주용매로 사용하였고 오일수율을 극대화할 수 있는 공용매로서 수소공여체 물질인 테트라린을 사용하였다. 테트라린의 함량이 증가할수록 오일의 수율은 증가하였다. 초임계암모니아 단독으로 폐타이어를 추출했을 때, 오일의 수율은 $280^{\circ}C$, 22.3MPa에서 48.8%인 반면에 폐타이어에 대한 테트라린의 무게비(데트라린무게/폐타이어무게)가 5일 때 오일의 수율은 $280^{\circ}C$, 22.3MPa에서 61.2%였다. 이런 현상은 초임계상태의 열분해에서 생성된 라디칼이 수소공여체물질에 의해 안정화되어 생성물의 고분자화 또는 이차분해가 억제되는 것으로 보여진다. 테트라린에 팽윤시킨 폐타이어는 적은 데트라린 소모로도 높은 오일수율을 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.37-47
• /
• 2002

Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

• Journal of Microbiology and Biotechnology
• /
• 제7권2호
• /
• pp.114-120
• /
• 1997

Microorganisms producing xylanase were screened for the enzymatic production of xylo-oligo saccharides from xylan. One of the bacteria isolated from compost produced an endoxylanase extracellularly. The bacterium was identified as Bacillus sp. according to its taxonomic characteristics examined. Xylanase production reached upto 5 U/ml after 22 h of culture in LB medium at $30^{\circ}C$. The xylanase was purified by ammonium sulfate precipitation and gel filtration. The molecular weight of the xylanase was estimated to be 20,400 by SDS-PAGE. Optimal temperature and pH for the xylanase activity was $60^{\circ}C$ and 6.5, respectively. The enzyme was stable at temperatures upto $40^{\circ}C$ and pH values from 4 to 10. The xylanase was completely inhibited by the addition of 2 mM mercury ion. Apparent $K_m$ and $V_max$ values for oat spelt xylan were 9.2 mg/ml and 1954 U/mg protein, respectively. For birchwood xylan, the values were 6.3 mg/ml and 1009 U/mg protein. The predominant products of the xylan hydrolysis were xylobiose, xylotriose and xylotetraose, indicating that the enzyme is an endoxylanase. Upto $85{\%}$ of the initially added enzyme (2 U/ml) was bound to 50 mg/ml of the insoluble fraction of oat spelt xylan after incubation at $30^{\circ}C$ for 30 min.

• 한국미생물·생명공학회지
• /
• 제24권1호
• /
• pp.87-91
• /
• 1996

The optimum temperature and pH for the enzyme activity were 45$^{\circ}C$ and 10.0, respectively. The enzyme was stable in a pH range of 5 to 10, and 62% of its activity was lost on heat treatment of 60$^{\circ}C$ for 20 min. The activity of the purified enzyme was inhibited by $Fe^{2+},\;Zn^{2+}\;and\;Pb^{2+}$, and slightly activated by $Mn^{2+}\;and\;Ca^{2+}$. ${\gamma}$-Chloromercuribenzoic acid, 2,4-dinitrophenol and $H_{2}O_{2}$ did not show inhibitroy effect on the lipolytic activity of the alkaline lipase but ethylenediaminetetraacetic acid inhibited the enzyem activity. This suggested that the enzyme have metal group in its active site. Sodium salts of bile acids stimulated the enzyme activity. Analysis of hydrolyzates of olive oil after the reaction revealed that Serratia liquefaciens AL-11 produced non-specific lipolytic enzyme.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.351-367
• /
• 1996

In the field Of individual identification in forensic Science, if the body is charred, it is sometimes impossible to identify the morphologic changes and charred tissue such as blood, muscle and bone can not be identified by forensic microbiologic method such as DNA typing. So the author used the characteristics of teeth which is relatively firm compare to other organs and stable to external environment such as heat and also possess cells needed for the DNA typing. The author conducted the experiment on teeth to detect DNA related to individual identification regarding to temperature in which other charredorgans can not be detected. The experiment was done on 64 extracted third molars consisted of unheated ones, and heated teeth to $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ for 45 min, 90 min, and 120 min respectively and to $250^{\circ}C$ for 45 min. DNA was extracted from each tooth and amplified fragment length polymorphism procedure(AMP-FLPs) using polymerase chain reaction(PCR) was applied and observed for the matching DNA in HumTH01 and HumCD4 locus and the followings Are the results : 1. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth which no heating has been done. 2. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth heated to $100^{\circ}C$ for 45, 90 and 120 min. 3. It was able to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $l00^{\circ}C$, $200^{\circ}C$ for 45, 90, 120 min. 4. It was impossible to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $250^{\circ}C$. So, it is possible to extract DNA from teeth that otherwise can not be extracted from other organs in the charred body and it can be concluded that teeth are highly reliable and applicatable as forensic odontology for individual identification.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.149-155
• /
• 2006

This paper presents a torsional micromirror detached from PZT actuators (TMD), whose rotational motion is achieved by push bars in the PZT actuators detached from the micromirror. The push bar mechanism is intended to reduce the bending, tensile and torsional constraints generated by the conventional bending bar mechanism, where the torsional micromirror is attached to the PZT actuators (TMA). We have designed, fabricated and tested prototypes of TMDs for single-axis and dual-axis rotation, respectively. The single-axis TMD generates the static rotational angle of $6.1^{\circ}$ at 16 VDC, which is 6 times larger than that of single-axis TMA, $0.9^{\circ}$. However, the rotational response curve of TMD shows hysteresis due to the static friction between the cover and the push bar in the PZT actuator. We have shown that 63.2% of the hysteresis is due to the static friction caused by the initial contact force of the PZT actuaor. Without the initial contact force, the rotational response curve of TMD shows linear voltage-angle characteristics. The dual-axis TMD generates the static rotational angles of $5.5^{\circ}$ and $4.7^{\circ}$ in x-axis and y-axis, respectively at 16 VDC. The measured resonant frequencies of dual-axis TMD are $2.1\pm0.1$ kHz in x-axis and $1.7\pm0.1$ kHz in y-axis. The dual-axis TMD shows stable operation without severe wear for 21.6 million cycles driven by 16 Vp-p sinusoidal wave signal at room temperature.

• 융합신호처리학회논문지
• /
• 제9권2호
• /
• pp.146-153
• /
• 2008

본 연구에서는 $0.8{\mu}m$ 아날로그 혼합 CMOS 기술에 의한 2단 연산 증폭기를 가진 집적화된 습도센서 시스템을 설계 및 제작하였다. 시스템은 28핀 및 $2mm{\times}4mm$의 크기를 가졌으며, 휘스톤 브릿지형 습도센서, 저항형 습도센서, 온도센서 및 신호의 증폭과 처리를 위한 연산증폭기를 단일 칩에 구성하였다. 기존의 CMOS 공정에 트렌치형의 감지 영역을 형성하기 위해 폴리-질화 에치 스탑 공정을 시도하였다. 이러한 수정된 기술은 CMOS 소자의 특성에 영향을 주지 않았고, 표준 공정으로 동일 칩 상에 센서와 시스템을 제작할 수 있도록 하였다. 연산증폭기는 이득 폭이 5.46 MHz 이상, 슬루율이 10 V/uS 이상으로 센서를 동작하기에 안정된 특성을 보였다. N형 습도감지 전계효과 트랜지스터의 드레인 전류는 상대습도가 10%에서 70%로 변화할 때 0.54mA에서 0.68 mA로 변화하였다.

• 한국식품영양과학회지
• /
• 제19권5호
• /
• pp.434-442
• /
• 1990

Aspergillus sp. CC-29 ws selected for its strong protease activity among various stains of molds found in soil. It was found that the production of alkaline protease reached to maximum when the wheat bran medium containing glucose as carbon source had been cultured for 4 days. Alkaline proteased was purified 36.10 fold from Aspergillus sp. CC-29 The purification procedures included ammonium sulfate fractunation gel filteration on Sepha-dex G-75 G-150 and DEAE-cellulose ion-exchange chromatography, The yield of the purified enzyme was 22.40% The purified enzyme was confirmed as a single band by the polyacryla-mide. When the purified enzyme was applied to SDS-PAGE the molecular weight was estima-ted 24000. The optimum pH for the enzyme activity was 9.0 and the optimum temperature was 4$0^{\circ}C$ The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 2.10$\times$10-4M with the Vmax of 29.41 $\mu$g/min. The enzyme was reactively stable in alkalic condition and unstable by heat treatment. The activity of alkaline protease was increased by the addition of Ca2+ whereas it was inhibited by Hg2+ Zn2+ at concentration of 1$\times$10-3M.