• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.419-424
• /
• 1997

It is well known that the metallo-phthalocyanines (MPcs) are sensitive to toxic gaseous molecules such as NO$_2$ as well as are chemically and thermally stable. Therefore, lots of MPcs have been studied as the potential chemical sensor for NO$_2$gas using quartz crystal microbalance(QCM) or electrical conductivity. In this study, thin films of octa(2-ethylhexyloxy)copper-phthalocyanine were prepared by Langmuir-Blodgett method and characterized by using UV-VIS absorption spectroscopy and ellipsometry. Optimal transfer condition of LB films was investigated and preliminary results of current-voltage(I-V) characteristics of these films exposed to NO$_2$gas as a function of film thickness, temperature and concentration were discussed.

• 한국안전학회지
• /
• 제14권2호
• /
• pp.77-82
• /
• 1999

In this paper, physical properties and electrical conductivity of electron beam irradiated low density polyethylene are studied. The specimens of thickness 100 $\mu\textrm{m}$ irradiated as each 1 Mrad, 2 Mrad, 4 Mrad, 8 Mrad, 16 Mrad and virgin are used in this experiment. FTIR analysis shows strong absorptions by methyl groups in wavenumbers 720 $cm^{-1}$ and 1463 $cm^{-1}$, and did not show any evidences of the presence of residual carbonyl groups. From the DSC analysis, the crystalline melting point of electron beam irradiated specimen is lower than that of virgin specimen. 1 Mrad irradiated sample shows the stable electrical conductivity characteristics with both temperature and electric field.

• 한국식품영양학회지
• /
• 제11권4호
• /
• pp.375-380
• /
• 1998

A study of characteristics of greenish pigments from silkwarm excrement by ethanol extraction. Through visible absorption scanning, it showed two absorption peaks at 415 and 657nm, and it was shown to be greenish color. In the presence of light, the stability of pigments rapidly degraded, but in the presence of Al-foil, green and blue cover were very stable. It was shown to be stabilized at the temperature of 7$0^{\circ}C$ until 20days and presence of metal ions, such as Na+, K+, Ca2+, Mg2+ and Zn2+. The pigments was shown to be stabilized in 5% acetic acid solution, but in the presence of lactic acid, citric acid and tartaric acid solution were unstable. On the result of TLC analysis, pigments were shown to be composed of eight color fractions, and main color fractions were F-1, F-2 and F-3. In F-1, F-2 fractions were revealed green color and F-3 fraction were revealed yellow color.

• 센서학회지
• /
• 제17권4호
• /
• pp.273-280
• /
• 2008

Monolith aperture-type oxygen sensors with simple structure of YSZ(pin-hole)/Pt/ YSZ(solid electrolyte)/Pt were fabricated by co-firing technique. To enhance the yield of productivity, a couple of YSZ green sheets for diffused barrier and solid electrolyte were prepared by tape-casting and co-firing method. The limit current characteristics of the oxygen sensors were measured between 500 and $650^{\circ}C$ The heating temperature of $600^{\circ}C$ was optimum as a portable oxygen sensor in the range of oxygen concentration from 0 to 75 vol%. Linear proficiency of limit current behavior as a function of oxygen concentration was controlled by the variation of aperture dimension. The fabricated oxygen sensors showed the stable sensing output for 30 days. Gas leakage in bonding area due to warping, cracking and thermal cycling was not found in the period.

• 한국미생물·생명공학회지
• /
• 제13권1호
• /
• pp.65-70
• /
• 1985

The production media, partial purification and the enzymatic characteristics of laccase from Pleurotus ostreatus were investigated. Among various media tried the double strength onion media showed much higher production of laccase compared to glucose and/or CMC added media. The laccase from Pleurotus ostreatus has the optimum pH of 5.94 for the activity and appears to be stable at relatively broad pH spectrum (4.7-8.7). The experiments on the temperature stability shows that above 90% activity could be preserved after holding at $30^{\circ}C$ for 40 min., 60% activity was remained after 40 min. at $50^{\circ}C$. The Km value of the laccase from Pleurotus ostreatus was estimated to be 3.209mM and the molecular weight of laccase was estimated to be 55,000 by SDS-Polyacrylamide gel electrophoresis.

• 환경생물
• /
• 제21권1호
• /
• pp.60-65
• /
• 2003

The cytidine deaminase was partialy purified with sephadex G-200 and the characteristics of the enzyme were clarified. The molecular mass of the plasmid-encoded protein was identified as about 30 kDa in a minicell system. The native enzyme was estimated to have the molecular mass of 60 kDa by gel filtration. This indicates that the native enzyme may exist as a dimer composed of two identical subunits. The enzyme was reasonably stable in the pH range of 6 to 9, and was labile under high temperature above $50^{\circ}C$. Mercaptoethanol, pCMB, mercury and copper were found to inhibit the enzyme activity. The cytidine analogues of bromo- and iodo-(deoxy)-cytidine were also found to inhibit the activity, while fluorodeoxycytidine and azacytidine were found to activate it. Deoxycytidine, cytidine, ara-C and Methyldeoxycytidine have excellent substrates for the enzyme.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.106-113
• /
• 1997

The thermal characteristics of two binary mixtures by sodium azide/manganese dioxide and ferric oxide, two ternary mixtures by sodium azide/silicon dioxide/manganese dioxide and ferric oxide were studied to obtain the basic data of gas-generating agents for air bags. The thermal reaction for all mixtures started at about $420^{\circ}C$, but the temperature at which the reaction rate reached a maximum was different with the states of samples. According to reaction results, nitrogen, nitrogen oxide and nitrogen dioxide were detected by GC-MS and so many kinds of new chemicals from sodium azide and metal oxide mixtures by XRD. NMS is considered as most stable and reasonable mixture for this types of gas-generating agents.

• 전기학회논문지P
• /
• 제54권1호
• /
• pp.47-53
• /
• 2005

Most of the loads in industrial power distribution systems are balanced and connected to three power systems. However, in the user power distribution systems, most of the loads are single & three phase and unbalanced, generating voltage unbalance. Voltage unbalance factor is mainly affected by load system rather than stable power system. Unbalanced voltage will draw a highly unbalanced current. As a result, the three-phase currents may differ considerably, thus resulting in an increased temperature rise in the machine. This paper presents a scheme on the characteristics of voltage and current unbalance factor under the load variation at the three phase 4-wire system. Load unbalance factor is measured by the power quality measurement apparatus and compared by the current unbalance factor. Two methods are indicated similar results. The voltage unbalance factor of the three-phase 4-wire system is approved by the field measurement. Each phase has an impedance each other by the unbalanced operation pattern and give rise to voltage unbalance.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.563-571
• /
• 1996

In order to fabricate solid electrolyte CaO-stabilized ZrO2 of high density sintered body economically 13 mol% CaO-stabilized ZrO2 powders were synthesized by the coprecipitation method. The characteristics and sintering behavior of fine powder were investigated. The precipitates has the specific surface area of 193 m2/g and apperaed to be fine and spherical primary particles with a size of approximately 5nm. The crystalliza-tion temperture of CaO-stabilized ZrO2 was 462$^{\circ}C$. The tetragonal phase was stable in the low calcining tempe-rature regions and the cubic zirconia solid solution was formed from above 120$0^{\circ}C$ through an intermediate stage of formation of CaZrO3 By introducing fine powders washed with alcohol and ball-milling process after calcination the sintered body was possible to attain the value of above 92% of the theoretical density at low temperature of 120$0^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.89-92
• /
• 2004

This paper described the capacitive sensor for the diagnosis of deterioration of electrical insulating oils applying guard-ring type the 3-terminal electrodes. To measure stable capacitance of the sensor and to determine the design factors of the sensor, we utilized computational analysis, FEM software. This capacitive sensor discern the extent of deterioration measuring relative permittivity of electrical insulating oils. The result of measuring numerous sample, mineral oils, as serviced year, we confirmed an increase in relative permittivity of oils. Moreover, we confirmed the superior characteristics of the sensor as a species, aged pattern of oils and operating temperature.