• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.145-152
• /
• 1996

A fine oil-in-water (O/W) emulsion using nonaqueous emulsification technique was developed and the behaviors of POE(25)octyldodecyl ether in nonaqueous solvent/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecyl ether existed soluble in nonaqueous solvent while, in aqueous system, it formed micelles. So, when a solvent, like glycerine in which POE(25)octyldodecyl ether has poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25) octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0, 25, 40, $50^{\circ}C$ and cycling test for a month, while the conventional emulsion system showed unstability. It is concluded that, by pertinent combination of solvents, the adsorption efficiency of surfactant could be improved.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2013

A liquid-monopropellant hydrazine thruster has several outstanding advantages such as relatively-simple structure, long/stable propellant storability, clean exhaust products, and so on. Therefore hydrazine thruster has such a wide application as orbit and attitude control system (ACS) for space vehicles. A hydrazine thruster with the medium-level thrust to be used in the ACS of space launch vehicles (SLV) has been developed, and its ground firing test result is presented in terms of thrust, impulse bit, temperature, and chamber pressure. It is verified through the performance test that the response and repeatability of thrust are very excellent, and the thrust efficiencies compared to its ideal requirement are larger than 93%.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.350-359
• /
• 1999

Conversion and oil-yield of a used automotive tire sample in supercritical decomposition and extraction for three solvents such as water, 28% ammoina solution and ammonia, were compared. Supercritical extraction with ammonia gave the highest conversion and oil-yield at the same temperature and pressure. In this paper, supercritical ammonia was used as major solvent and tetralin acting as hydrogen-donor, was used as cosolvent. As the amount of tetralin increased, oil-yield was Increased. When a tire sample was extracted by supercritical ammonia, oil-yield was 48.8% at $280^{\circ}C$, 22.3MPa. But when the weight ratio of tetralin to tire sample (weight of tetralin/weight of tire sample) was 5, oil-yield was 61.2% at $280^{\circ}C$ and 22.3 MPa. These phenomena indicate that as radicals produced in supercritical decomposition become stable, the polymerization and the second decomposition of products may be inhibited. Supercritical extraction of a tire sample swollen by tetralin gave high oil-yield although the amount of tetralin was a little.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.37-47
• /
• 2002

Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.114-120
• /
• 1997

Microorganisms producing xylanase were screened for the enzymatic production of xylo-oligo saccharides from xylan. One of the bacteria isolated from compost produced an endoxylanase extracellularly. The bacterium was identified as Bacillus sp. according to its taxonomic characteristics examined. Xylanase production reached upto 5 U/ml after 22 h of culture in LB medium at $30^{\circ}C$. The xylanase was purified by ammonium sulfate precipitation and gel filtration. The molecular weight of the xylanase was estimated to be 20,400 by SDS-PAGE. Optimal temperature and pH for the xylanase activity was $60^{\circ}C$ and 6.5, respectively. The enzyme was stable at temperatures upto $40^{\circ}C$ and pH values from 4 to 10. The xylanase was completely inhibited by the addition of 2 mM mercury ion. Apparent $K_m$ and $V_max$ values for oat spelt xylan were 9.2 mg/ml and 1954 U/mg protein, respectively. For birchwood xylan, the values were 6.3 mg/ml and 1009 U/mg protein. The predominant products of the xylan hydrolysis were xylobiose, xylotriose and xylotetraose, indicating that the enzyme is an endoxylanase. Upto $85{\%}$ of the initially added enzyme (2 U/ml) was bound to 50 mg/ml of the insoluble fraction of oat spelt xylan after incubation at $30^{\circ}C$ for 30 min.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.87-91
• /
• 1996

The optimum temperature and pH for the enzyme activity were 45$^{\circ}C$ and 10.0, respectively. The enzyme was stable in a pH range of 5 to 10, and 62% of its activity was lost on heat treatment of 60$^{\circ}C$ for 20 min. The activity of the purified enzyme was inhibited by $Fe^{2+},\;Zn^{2+}\;and\;Pb^{2+}$, and slightly activated by $Mn^{2+}\;and\;Ca^{2+}$. ${\gamma}$-Chloromercuribenzoic acid, 2,4-dinitrophenol and $H_{2}O_{2}$ did not show inhibitroy effect on the lipolytic activity of the alkaline lipase but ethylenediaminetetraacetic acid inhibited the enzyem activity. This suggested that the enzyme have metal group in its active site. Sodium salts of bile acids stimulated the enzyme activity. Analysis of hydrolyzates of olive oil after the reaction revealed that Serratia liquefaciens AL-11 produced non-specific lipolytic enzyme.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.351-367
• /
• 1996

In the field Of individual identification in forensic Science, if the body is charred, it is sometimes impossible to identify the morphologic changes and charred tissue such as blood, muscle and bone can not be identified by forensic microbiologic method such as DNA typing. So the author used the characteristics of teeth which is relatively firm compare to other organs and stable to external environment such as heat and also possess cells needed for the DNA typing. The author conducted the experiment on teeth to detect DNA related to individual identification regarding to temperature in which other charredorgans can not be detected. The experiment was done on 64 extracted third molars consisted of unheated ones, and heated teeth to $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ for 45 min, 90 min, and 120 min respectively and to $250^{\circ}C$ for 45 min. DNA was extracted from each tooth and amplified fragment length polymorphism procedure(AMP-FLPs) using polymerase chain reaction(PCR) was applied and observed for the matching DNA in HumTH01 and HumCD4 locus and the followings Are the results : 1. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth which no heating has been done. 2. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth heated to $100^{\circ}C$ for 45, 90 and 120 min. 3. It was able to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $l00^{\circ}C$, $200^{\circ}C$ for 45, 90, 120 min. 4. It was impossible to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $250^{\circ}C$. So, it is possible to extract DNA from teeth that otherwise can not be extracted from other organs in the charred body and it can be concluded that teeth are highly reliable and applicatable as forensic odontology for individual identification.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.149-155
• /
• 2006

This paper presents a torsional micromirror detached from PZT actuators (TMD), whose rotational motion is achieved by push bars in the PZT actuators detached from the micromirror. The push bar mechanism is intended to reduce the bending, tensile and torsional constraints generated by the conventional bending bar mechanism, where the torsional micromirror is attached to the PZT actuators (TMA). We have designed, fabricated and tested prototypes of TMDs for single-axis and dual-axis rotation, respectively. The single-axis TMD generates the static rotational angle of $6.1^{\circ}$ at 16 VDC, which is 6 times larger than that of single-axis TMA, $0.9^{\circ}$. However, the rotational response curve of TMD shows hysteresis due to the static friction between the cover and the push bar in the PZT actuator. We have shown that 63.2% of the hysteresis is due to the static friction caused by the initial contact force of the PZT actuaor. Without the initial contact force, the rotational response curve of TMD shows linear voltage-angle characteristics. The dual-axis TMD generates the static rotational angles of $5.5^{\circ}$ and $4.7^{\circ}$ in x-axis and y-axis, respectively at 16 VDC. The measured resonant frequencies of dual-axis TMD are $2.1\pm0.1$ kHz in x-axis and $1.7\pm0.1$ kHz in y-axis. The dual-axis TMD shows stable operation without severe wear for 21.6 million cycles driven by 16 Vp-p sinusoidal wave signal at room temperature.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.146-153
• /
• 2008

Integrated humidity sensor system with two stages operational amplifier has been designed and fabricated by $0.8{\mu}m$ analog mixed CMOS technology. The system (28 pin and $2mm{\times}4mm$) consisted of Wheatstone-bridge type humidity sensor, resistive type humidity sensor, temperature sensors and operational amplifier for signal amplification and process in one chip. The poly-nitride etch stop process has been tried to form the sensing area as well as trench in a standard CMOS process. This modified technique did not affect the CMOS devices in their essential characteristics and gave an allowance to fabricate the system on same chip by standard process. The operational amplifier showed the stable operation so that unity gain bandwidth was more than 5.46 MHz and slew rate was more than 10 V/uS, respectively. The drain current of n-channel humidity sensitive field effect transistor (HUSFET) increased from 0.54 mA to 0.68 mA as the relative humidity increased from 10 to 70 %RH.