• 원예과학기술지
• /
• 제19권2호
• /
• pp.153-158
• /
• 2001

세인트폴리아(Saintpaulia ionanth)의 잎에는 노랑 또는 갈색의 반점이 많이 생긴다. 이러한 반점은 leaf spot라고 불리며 관수시엽온이 급격히 떨어지는 쇼크(Temperature Drop Shock: TDS)에 기인하는 것으로 알려져 있다. TDS에 의해 발생하는 leaf spot에 대해서는 세인트폴리아 외에는 지금까지 발표된 바 없다. 본 연구에서는 이러한 엽상해가 어떤 종류의 식물에서 발생하는지 알아보기 위해, 세인트폴리아가 속해 있는 Gesneriaceae과 식물을 중심으로 조사하였다. 그 결과, Gesneriaceae과 식물에서는 Gloxinia 등 10속, 26종의 식물에서 leaf spot가 발생하였으며, Acanthaceae과 식물에서는 7속, 8종의 식물에서 발생하였다. Leaf spot이 발생하는 식물들의 잎에서는 어떠한 형태적, 해부학적 유사성이 발견되지 않았다. 어떤 식물의 잎은 두껍고 단단한 반면, 어떤 식물의 잎은 얇고 부드러웠다. 그러나 leaf spot이 발생한 모든 식물들에 있어 TDS에 의한 상해는 책상조직세포에만 발생하였고, 엽록소형광도 TDS 처리 직후 급격히 감소하여 회복되지 않는 등, 세인트폴리아에서의 leaf spot과 동일한 현상을 보였다. 이러한 결과들로부터 TDS에 의해 발생하는 엽상해는 세인트폴리아만이 아니라 좀더 넓은 범위의 식물에서 발생된다는 사실이 명확해졌다.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.784-794
• /
• 1994

Though spodumene have a law theraml expension and good thermal shock resistance, its sintering temperature is too close to its melting point in the application for industral purpose. Solving the problems, impurities within the silicate minerals act as a frit during firing, so its densification is expected through enlargement of sintering temperature range. By the heat treatment of starting materials, mixtures of silicate mineral, lithium carbonate, if necessary SiO2 or Al2O3 were added for stoichiometric correction, in the range of 1000~125$0^{\circ}C$ for 10 hrs, $\beta$-spodumene single phase was synthesized. Mixtures with sillimanite group minerals, $\beta$-spodumene was formed at 120$0^{\circ}C$ or 125$0^{\circ}C$ via intermediate phases of petalite, Li2SiO3 and LiAlO2. For the case of kaolin group minerals, synthesis were completed at 110$0^{\circ}C$ for Hadon pink kaolin, 120$0^{\circ}C$ for New Zealand white kaolin, When pyrophyllite group minerals were used, those were at the range of 1000~125$0^{\circ}C$. Spodumene was completed at lowest temperature, 100$0^{\circ}C$ from the mixture of Wando pyrophyllite among them. Microstructure of synthesized powders showed the inrregular lump shape such as densed crystallines.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1808-1815
• /
• 2001

The characteristics of a pulsed plasma jet originating from an electrothermal capillary discharge have been investigate using laser-induced fluorescence (LIF) measurement. Previous emission measurements of a 3.1 kJ plasma jet show trial upstream of the Mach disk the temperature and electron number density are about 14,000 K and and 10$\^$17/ cm$\^$-3/, while downstream of the Mach dick tole values are about 25,000 K and 10$\^$18/ cm$\^$-3/, respectively. However, these values are barred on line-of-sight integrated measurements that may be misleading. Hence, LIF is being used to provide both spatially and temporally resolved measurements. Our recent work has been directed at using planar laser-induced fluorescence (PLIF) imaging of atomic copper in the plasma jet flow field. Copper is a good candidate for PLIF studies because it is present throughout the plasma and has electronic transitions that provide an excellent pump-detect strategy. Our PLIF results to date show that emission measurements may give a misleading picture of the flow field, as there appeals to be a large amount of relatively low temperature copper outside the barrel shock. which may lead to errors in temperature inferred from emission spectroscopy. In this paper, the copper LIF image is presented and at the moment, relative density of atomic copper, which is distributed in the upstream of the pulsed plasma jet, is discussed qualitatively.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.199-204
• /
• 2009

The effect of temperature on ACF thermocompression bonding for FPD assembly was investigated, It was found that Au bumps on driver IC's were not bonded to the glass substrate when the bonding temperature was below $140^{\circ}C$ so bonds were made at temperatures of $163^{\circ}C$, $178^{\circ}C$ and $199^{\circ}C$ for further testing. The bonding time and pressure were constant to 3 sec and 3.038 MPa. To test bond reliability, FPD assemblies were subjected to thermal shock storage tests ($-30^{\circ}C$, $1\;Hr\;{\leftrightarrow}80^{\circ}C$, 1 Hr, 10 Cycles) and func! tionality was verified by driver testing. It was found all of FPDs were functional after the thermal cycling. Additionally, Au bumps were bonded using ACF's with higher conductive particle densities at bonding temperatures above $163^{\circ}C$. From the experimental results, when the bonding temperature was increased from $163^{\circ}C$ to $199^{\circ}C$, the curing time could be reduced and more conductive particles were retained at the bonding interface between the Au bump and glass substrate.

• 한국전자통신학회논문지
• /
• 제19권4호
• /
• pp.647-654
• /
• 2024

군 무기체계에서는 무장을 제어하기 위한 조종간이 필수적으로 사용된다. 본 논문에서는 RS-422 통신과 임베디드 프로세서를 이용하여 무장 조종간의 설계와 성능을 평가한다. 이 무장 조종간은 한국 조종사의 손 치수와 임무 편의성을 고려하여 인체공학적으로 디자인되었으며, RS-422 통신 기반의 회로와 소프트웨어는 임베디드 프로세서를 이용하여 설계되었다. 무장 조종간의 시제품을 제작하여 기본성능시험 및 고도, 고온, 저온, 온도충격, 습도, 강우, 진동 충격, 가속도 등 다양한 환경시험을 시행하여 기준을 충족하였다.

• 에너지공학
• /
• 제21권1호
• /
• pp.26-32
• /
• 2012

본 연구에서는 PV(photovoltaic)모듈에서 경년에 따른 효율 저하의 원인을 분석하기 위해 셀 레벨에서의 열충격 시험을 수행하였다. 열충격 시험의 조건은 $-40^{\circ}C$에서 $85^{\circ}C$로 각각 15분씩 30분을 1사이클로 하였으며, 열충격 시험 500 사이클 동안 100 사이클 간격으로 EL분석 및 I-V분석을 수행하였다. 효율 감소율은 단결정 Bare Cell이 8%, Solar Cell이 9%였으며, 다결정 Bare Cell이 6%, Solar Cell이 13%의 감소율을 보였다. 열충격 시험 후 Solar Cell은 표면 손상으로 인한 효율저하를 확인할 수 있었다. Bare Cell의 경우 표면의 손상이 없었지만, 효율이 저하된 것을 확인할 수 있었다. 이는 Fill Factor 분석에 의해 경년 시 나타나는 누설전류에 의한 소모전력 증가로 효율 저하에 영향을 준 것으로 판단된다. 또한, Bare Cell보다 Solar Cell에서의 효율 감소율이 상대적으로 높게 나타난 결과는 표면 손상 및 소모 전력의 증가로 인해 Solar Cell 효율에 큰 영향을 미치는 것으로 판단된다. 향후 단면 분석법 및 다양한 조건의 시험 기법을 활용하여 PV모듈 뿐 아니라 Cell 레벨에서의 불규칙한 효율 및 Fill Factor의 감소 원인을 검토하고, Solar Cell에서의 효율 저하가 가속되는 원인에 대한 대책 방안 연구가 수행되어야 할 것이다.

• 한국수산과학회지
• /
• 제40권4호
• /
• pp.226-233
• /
• 2007

Physiological responses of mullet Mugil haematocheilus to cold shock in winter were investigated. The experimental mullets were initially acclimated at $10.0^{\circ}C$ and then the water temperature was reduced to $-1.2^{\circ}C$ for cold shock experiment. The stress responses was monitored for nearly 50 hours. The parameters monitored include survival rate, plasma alanine aminotransferase (ALT), aspartate aminotransferase (AST), glucose (GLU), total protein (TP), electrolytes $(Na^+,\;K^+,\;Cl^-)$, cortisol and thyroid hormones $(TT_4,\;TT_3,\;FT_4\;and\;FT_3)$. With the exception of the TP and electrolytes, most parameters changed significantly during the cold shock. The survival rate did not change from $10^{\circ}C\;to\;-0.6^{\circ}C$, but decreased significantly below $-1.0^{\circ}C$, and was zero at $-1.2^{\circ}C$. The plasma AST and ALT concentrations increased remarkably from $2.5^{\circ}C\;to\;0.5^{\circ}C$ and from $2.5^{\circ}C\;to\;1.5^{\circ}C$, respectively, and then declined rapidly as the temperature decreased to $-1.2^{\circ}C$. The plasma GLU concentration did not change until -0.5'E, and then the concentration increased significantly at $-1.2^{\circ}C$. The plasma cortisol concentration increased remarkably from $2.5^{\circ}C\;to\;-0.5^{\circ}C$, and then declined at $-1.2^{\circ}C$. The plasma thyroid hormones showed two changes during the cold shock. Both plasma 74 concentrations increased remarkably from $2.5^{\circ}C$\;to\;0.5^{\circ}C$, then declined rapidly until $-1.2^{\circ}C$, while both plasma 73 concentrations decreased significantly from $10^{\circ}C\;to\;2.5^{\circ}C$, and then remained significantly lower than the concentration at $10^{\circ}C$.

• 보존과학연구
• /
• 통권31호
• /
• pp.31-42
• /
• 2010

This study were performed thermal shock test for four kind of different rocks (Iksan granite, Namsan granite, Jeongseon marble, Yeongyang sandstone), and according to heating temperature($400^{\circ}C$, $600^{\circ}C$) on samples were investigated physical properties such as specify gravity, porosity, p-wave velocity. As a result, the tendency was appeared that porosity increased, and specific gravity and p-wave velocity decreased at a more higher temperature. But, the situation of change appeared characteristic according to temperature and rock types. In the case of Yeongyang sandstone, it appeared in especially porosity increasing at $400^{\circ}C$. The specific gravity was little change in the all the rock at $400^{\circ}C$ but the decreased at $600^{\circ}C$. Therefore the specific gravity in the temperature range is due to the relatively small impact on the change is expected. Porosity of the granite at $400^{\circ}C$ changes little. but marble in the rate of change is large. Conversely, the sandstone porosity decreased. At $600^{\circ}C$ increased porosity in all of rocks. particularly sandstone the smallest increase in porosity. Experiments showed that p-wave velocity measured through dry rocks was sensitive to quantify the thermal damage. The p-wave velocity of all rocks decreased with increasing temperature. In the relation between porosity and p-wave velocity, p-wave velocity decreased with increasing porosity. On the other hand, in case of Yeongyang sandstone p-wave velocity decreased with decreasing porosity. thus, development of microcracks more affects p-wave velocity than porosity. In this study, damage intensity was well explained with porosity and p-wave velocity values depending on temperature increase.

• Journal of Microbiology and Biotechnology
• /
• 제30권2호
• /
• pp.259-270
• /
• 2020

Listeria monocytogenes is a gram-positive, facultative anaerobe food pathogen responsible for the listeriosis that mostly occurs during the low-temperature storage of a cold cut or dairy products. To understand the systemic response to a wide range of growth temperatures, L. monocytogenes were cultivated at a different temperature from 10℃ to 42℃, then whole cell proteomic analysis has been performed both exponential and stationary cells. The specific growth rate increased proportionally with the increase in growth temperature. The maximum growth rate was observed at 37℃ and was maintained at 42℃. Global protein expression profiles mainly depended on the growth temperatures showing similar clusters between exponential and stationary phases. Expressed proteins were categorized by their belonging metabolic systems and then, evaluated the change of expression level in regard to the growth temperature and stages. DnaK, GroEL, GroES, GrpE, and CspB, which were the heat&cold shock response proteins, increased their expression with increasing the growth temperatures. In particular, GroES and CspB were expressed more than 100-fold than at low temperatures during the exponential phase. Meanwhile, CspL, another cold shock protein, overexpressed at a low temperature then exponentially decreased its expression to 65-folds. Chemotaxis protein CheV and flagella proteins were highly expressed at low temperatures and stationary phases. Housekeeping proteins maintained their expression levels constant regardless of growth temperature or growth phases. Most of the growth related proteins, which include central carbon catabolic enzymes, were highly expressed at 30℃ then decreased sharply at high growth temperatures.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.77-83
• /
• 2020

바이오매스가 포함된 발포구조체의 발포온도에 따른 SEM, 밀도, 공극률, 수분투과도 측정을 통해 특성 변화를 분석하였으며, 소비자가 해당 용기를 사용할 때의 열적 안정성을 확인하기 위해 MIL-STD규격에 따라 열충격 처리의 영향을 분석하였다. 측정 결과 발포온도가 증가할수록 대체로 기공의 크기는 증가하고 기공의 수는 감소하여 밀도는 통계적으로 유의한 차이가 없음을 확인하였다. 또한 공극률과 수분투과도 측정결과는 서로 다른 경향성을 보이고 있는데 이는 기공의 크기와 수, 기공 간의 구도가 변화하였기 때문인 것으로 사료되며, 이에 대한 추가적인 연구가 필요하다. 열충격 시험 결과, 열충격 반복횟수를 거듭할수록 기공의 크기가 감소하면서 밀도는 증가하고 공극률과 수분투과도는 감소하는 것을 확인할 수 있었다. 이는 시료에 고온을 가함으로써 시료가 연화되었고, 연화된 상태의 시료에 곧바로 저온을 가하여 시료가 수축되면서 기공의 크기와 구도가 변화하였기 때문인 것으로 판단된다. 하지만 밀도의 경우 통계적으로 유의한 차이가 없었으며 수분투과도의 경우 수치가 감소하는 경향을 확인할 수 있었으므로 해당 발포구조체로 제작된 HMR 용기는 열적 안정성이 있다고 판단할 수 있다.